Design Projects

Copy & paste to canva make beautiful ebook

Seeking an experienced Canva designer to transform a 153‑page manuscript into a polished, visually engaging eBook. Tasks: import and format text, design cohesive page layouts, apply consistent typography and styling, create an attractive cover, and deliver a print‑ready and digital PDF. Must ensure readability, professional aesthetics, and adherence to provided content. Timely delivery and attention to detail required. Competitive bids welcome.

Modern Targa Top Design

I'm looking for a skilled artist to create a modern targa top design for a 20 foot Bertram boat, which will be used for fabrication. ‎ ‎Key Requirements: ‎- Modern design aesthetic ‎- Use of stainless steel as the primary material ‎- Inclusion of a fabric soft top ‎ ‎Ideal Skills and Experience: ‎- Expertise in marine design ‎- Proficiency in working with stainless steel ‎- Strong artistic ability in modern design concepts ‎ ‎Please submit your portfolio and relevant experience.

A5 flyer design for social cycling event

I need a clean, professional A5 one-sided flyer for a new social cycling event called Pedals & Pints. The event is an organised social ride from Shalford/Guildford to Brighton via the Downs Link on Saturday 15 August. This is not a race, not timed and not aimed at hardcore cyclists. It’s a relaxed, affordable day out on the bike, with planned coffee, pub and brewery stops along the way. The flyer needs to be suitable for printing and leaving in cafés, pubs, bike shops and community boards. Key details to include: Pedals & Pints Saturday 15 August Shalford/Guildford to Brighton Via the Downs Link Organised social ride Mostly flat Ride at your own pace Not timed / not competitive Suitable for hybrids, gravel bikes, mountain bikes and e-bikes £12.50 Scan to book Booking link for QR code: https://app.acuityscheduling.com/schedule.php?owner=23608651&appointmentType=93722651 Important design notes: The flyer should feel social, active, outdoorsy, friendly and local — not like a serious cycling race or sportive. I’d like to include a small photo of me with wording such as: Organised by Angus Indoor cycling coach and founder of Pedals & Pints The aim is to make me recognisable as the person behind the event, but the flyer should still focus mainly on the ride. Style: Clean, bold, easy to read, not too busy. One strong image, clear event info, QR code, and a small organiser section. Deliverables: Print-ready A5 PDF Editable Canva file if possible PNG/JPEG version for social media

Illustrator Needed for Leisurewear Placement Prints & Embroidery

We are a small startup leisurewear brand looking to collaborate with an experienced illustrator or graphic designer to create original artwork for our upcoming collections. The main focus of the project will be the development of placement prints and embroidery designs for casual garments such as T-shirts, sweatshirts, hoodies, and other leisurewear pieces. We have attached examples of prints that reflect the visual style and direction we would like to follow. These references should be used as inspiration for the overall mood, composition, and graphic language, while all final artwork must be original and created specifically for our brand. We are looking for someone with a strong sense of visual identity, fashion graphics, and commercial design. The ideal illustrator should be able to create artwork that feels modern, wearable, and suitable for a contemporary lifestyle brand. The scope of work may include: Original placement print designs for the front and/or back of garments Embroidery artwork for chest, sleeve, or other garment placements Graphic concepts based on our brand direction and mood boards Print-ready and embroidery-ready artwork files Possible ongoing collaboration for future collections We are especially interested in designs that are clean, stylish, and memorable, with a premium leisurewear feel. Experience in fashion, streetwear, sportswear, or lifestyle apparel design would be highly appreciated.

opportunity

Education Business design

We seek a creative brand designer to craft a cohesive identity for an education business. Deliverables: primary wordmark and TFM companion mark, comprehensive brand guidelines, email signature, business card, letterhead template, social media kit, presentation template, marketing collateral, and website UI design. The ideal candidate will produce refined, versatile visual assets, ensure consistency across touchpoints, and provide editable source files and specifications for seamless implementation. Logo design Brand guidelines document Email signature Business card design Letterhead template Social media brand kit Presentation template Marketing collateral Website UI design

opportunity

Create 3D Leopard Bottle Model for Blow Moulding (STL Required)

Looking for an experienced 3D product designer to create a realistic leopard-shaped plastic bottle for manufacture. STL file required. Approximate height 170mm. Target sand fill capacity 120g–150g. The bottle will be used for a children's coloured sand activity. Reference images are attached. Designers may either follow the attached concept closely or propose an improved design, provided the bottle remains suitable for manufacture and meets the size and capacity requirements. The final design should be suitable for blow moulding and include a standard bottle neck opening. Please quote your fixed price and estimated completion time. Budget is flexible for an experienced designer with relevant product design and 3D modelling experience. When applying, please provide examples of similar product design or 3D modelling work.

opportunity

PCB designer for CM4 carrier with isolated RS422/RS485

We need an experienced electronics/PCB designer to design a custom Raspberry Pi Compute Module 4 carrier board for an industrial field test tool. The board will be used for roadside electronic sign testing and needs robust isolated serial communications, Ethernet, WiFi support via the CM4 module, touchscreen display support and a connector for an address plug socket. We are developing a portable field tester for roadside electronic signs and controllers. The unit will run Linux on a Raspberry Pi CM4 and needs to communicate with equipment over isolated RS422/RS485 and Ethernet. It needs to be designed sensibly for field use, with proper isolation, protection, clear connectors and future small-batch manufacture in mind. Required board features: • Raspberry Pi Compute Module 4 socket. • Support for CM4 wireless variant for WiFi/Bluetooth. • Gigabit Ethernet port using the CM4 native Ethernet interface. • Two independent isolated serial ports. • Each serial port to support full-duplex 4-wire RS422: TX+, TX-, RX+, RX-. • Ideally allow RS485 configuration as well, if practical: 2-wire half-duplex RS485 or 4-wire RS485/RS422 mode. • Digital isolation on the serial ports. • Isolated DC/DC supply for the field side of the serial interfaces. • TVS/ESD protection on field connections. • Termination and bias options per port, preferably via jumpers or DIP switches. • TX/RX activity LEDs per port. • Connector for an external address plug socket. • MIPI DSI touchscreen display connector, similar to the Waveshare CM4 Nano B: 15-pin 1.0mm FPC connector, suitable for common Raspberry Pi DSI touchscreens such as 4.3 inch, 5 inch or 7 inch. • Allow for touchscreen/control lines where required. • Mechanical clearance and routing allowance for the screen ribbon cable. • WiFi/Bluetooth to be provided by the CM4 wireless module, not a separate WiFi chipset. • RF/mechanical allowance for CM4 onboard antenna or external antenna connection. • Protected power input suitable for field equipment. • Status LEDs for power, CM4 activity, Ethernet, serial activity and isolated power good. • Sensible mounting holes and enclosure-friendly layout. Preferred technical direction: The serial ports should probably be implemented using a dual UART interface from the CM4, for example an SPI-to-dual-UART device such as the SC16IS752/SC16IS762 family or equivalent, feeding isolated RS422/RS485 transceivers. We are open to the designer recommending exact parts, but the design must be supportable and manufacturable, not based on obscure parts with poor availability. Deliverables required: • Schematic design. • PCB layout. • Gerber files. • Pick-and-place / assembly outputs. • Bill of materials with manufacturer part numbers. • Any required configuration notes for CM4 interfaces used, especially DSI, SPI/UART and Ethernet. • Basic bring-up notes and test points. Useful reference board: The Waveshare CM4 Nano B is a useful reference for the compact CM4 carrier concept, particularly the CM4 socket, Ethernet, DSI touchscreen connector and general small carrier-board approach. Our board needs to add robust isolated dual RS422/RS485 and address plug support. Please only respond if you have experience designing Raspberry Pi CM4 carrier boards, isolated serial interfaces, or industrial communications hardware. We are happy to work iteratively, but need someone who can make sensible engineering decisions and produce files suitable for manufacture. We can provide more detail on the address plug wiring and preferred connectors once we have selected a designer.

Anime illustrations

Hi I am looking for a professional illustrator to create 5 illustrations in total in anime style. 1- Description is fully provided 2- Illustrations need to be in anime style and references are provided 3- The project is urgent. Please make your bid asap. Thanks very much.

New Day Trading Simple Website

Experienced trader seeks a minimalist one-page website for OnlineTradingCenter.com to promote a single 4-hour day trading seminar. The site should convey credibility, highlight instructor background, feature seminar details (date, time, $99 fee, max 20 students, Long Beach Airport hotel venue), include clear pricing and registration CTA, simple schedule, FAQ, testimonials, and a concise bio referencing prior leadership at Online Trading Academy. Design must be elegant, mobile-first, fast-loading, SEO-friendly, and easy to update. Include mockup, responsive HTML/CSS and WordPress-ready files.

opportunity

Anchor bolts calculations

We am looking for a structural engineer to perform a calculation for anchor bolts to secure a steel stand to a concrete base. Result should be what size of anchor bolts use. And some calculations which proves this. We have already the design of the steel construction. Now I have added a specification of the project so please take a look at the attached and let me know if it is still possible. It is important that the work is made according to international standards because it is going to be used for a large bridge in Denmar.

Flutter App Dev to complete my existing Android / iOS project

I hired a previous dev who purchased this premade Flutter app and has added so customizations https://codecanyon.net/item/run-tracker-step-counter-and-water-reminder-flutter-android-ios-app/34240320 I am looking to remove / add some more features and complete the project. Looking to start / complete ASAP

opportunity

Non verbal reasoning questions

Seeking an experienced creator of non-verbal reasoning questions akin to English grammar school entrance exams. Tasks include designing clear, original puzzles (e.g., pattern matrices, series, odd-one-out, rotations, nets and cubes, codes, 3d shapes, operations, mirror images and more) with solutions. Multiple and ongoing projects available for a reliable candidate demonstrating precision, pedagogical suitability and attention to level-appropriate difficulty. Please provide per-question pricing and representative sample items for evaluation.

I need a stuffed animal redesigned

I need a stuffed animal redesigned; I want my plush redesigned and possibly combined with elements from other stuffed animals. This project entails conceptual sketches, refined illustrations, and optional pattern layouts for production. Deliverables should include several design variations, color palettes, fabric suggestions, and brief assembly notes. Creativity, attention to tactile detail, and experience in toy or plush design are essential. Please bid with estimated timeline and number of revisions included.

opportunity

Pattern maker and seamstress for athleisure wear

I am looking for a pattern maker who can create a sweatshirt pattern (I've got some rough ideas of having a slightly more curved and oversized sleeve), as well as a seamstress who can sew together the pattern pieces once they have been printed and dyed. (If you are both a pattern cutter and seamstress that would be amazing.) I need the final sweatshirts (5 in total) to be of high quality as I will be showing them at my postgrad degree show, my website and possibly to an independent boutique. Looking for a quick turnaround for both patterning and sewing. Many thanks Funmi