3D Design Projects

opportunityurgent

Photorealistic 3D Visualization of Clean Energy Parks in Sweden

We are developing next-generation modular clean energy parks in Sweden and are seeking a highly skilled 3D visualization expert with experience in large-scale industrial / infrastructure environments. This project is confidential and relates to strategic energy infrastructure development. Shortlisted candidates will be required to sign an NDA before receiving detailed materials. The objective is to create investor-grade, photorealistic 3D site visualizations of modular clean energy parks using Small Modular Reactors (SMRs) integrated into real Swedish land properties currently under evaluation. This is mainly a strategic visualization and environmental integration assignment. Phase 1 – Conceptual Site Integration The selected designer will: • Create an SMR energy park layout based on actual available designs • Integrate structures into real aerial imagery / terrain • Develop a coherent architectural language for the park • Demonstrate adaptability of modules across different site types ⸻ Components to Potentially Include • Modular reactor building units • Turbine hall • Cooling solution (compact air or hybrid system) • Switchyard / grid connection area • Security perimeter • Etc. • Optional co-located data center • Optional adjacent clean industrial facility We will initially provide: • Conceptual reference renderings from leading SMR manufacturers • Satellite imagery and property maps • High-level footprint assumptions • Strategic design direction Detailed volumes and dimensions will be provided in Phase 2 after NDA execution. ⸻ In addition to high-resolution still renderings, we are potentially also looking for: 1. Cinematic Short Animation (10–20 seconds) A slow aerial drone-style sweep across the energy park (MP4 format, 4K preferred). 2. Layered Source Files Delivery of editable project files (e.g., PSD, Blender / 3ds Max / Cinema 4D + textures) to allow future updates and scalability. 3. Modular Asset Library Creation of reusable 3D modules: • Reactor building module • Turbine module • Cooling module • Data center module These should be adaptable for deployment across multiple future sites. ⸻ Deliverables Summary • 3–5 photorealistic 4K renderings • 1 aerial overview • 2 ground-level perspectives • 1 adaptable modular layout version • 1 industrial co-location scenario • 1 short cinematic animation • Source files ⸻ Long-Term Potential This may develop into an ongoing collaboration across multiple infrastructure projects.

Keyshot Rendering Only Required

I have 6 x Models of workstation i have done in Sketchup that i need rendered in Keyshot. They have to have white backgrounds with light shadow on underneath the unit.

opportunity

Product re design

We are looking to redesign our video scribble booth, we need to modernise the current design, maybe have rounded corners, a light box all the way round for branding, TV at the bottom in portrait, LED accenting, larger window screen. we would like three different concepts

opportunity

Clean rebuild of working 3D prototype into production-ready CAD

I’m looking for an experienced CAD engineer or product designer to take my existing 3D design files and rebuild them properly from scratch, ready for production in metal. Background • I designed all parts myself and have already validated the functionality by 3D printing and physical testing • Everything works, but the CAD files are crude and not production-ready • Tolerances are largely guesswork • Parts were developed iteratively by adding and removing features, so many models are a hodgepodge rather than clean parametric designs What I need • Recreate all parts cleanly in a professional CAD system • Apply sensible, engineering-grade tolerances suitable for CNC machining in aluminium • Produce fully constrained, parametric models • Assemble parts where appropriate to check fit and function • Deliver clean STEP (STP) files suitable for manufacture Workflow • I would want to 3D print the rebuilt parts first to validate everything before committing to metal • Expect some iteration after first review/print • I can supply existing STL/STEP files, photos, and functional explanations Ideal candidate • Strong mechanical CAD experience (SolidWorks, Fusion 360, Inventor, Creo, or similar) • Comfortable designing for CNC machining in aluminium • Able to think like an engineer, not just redraw geometry • Experience rebuilding rough prototypes into production-ready designs Please reply with • Brief overview of your relevant experience • CAD software used • Examples of similar “prototype to production” work This is a serious engineering tidy-up rather than a simple file conversion, and I’m looking for someone who enjoys turning working prototypes into elegant, manufacturable designs. Next steps Once I’ve reviewed responses and shortlisted suitable candidates, I will ask for a simple NDA to be signed before sharing any detailed files, drawings, or samples.

Need an articulated squid for 3d printing

I need an articulated squid to 3d print. It should be 1 inch long, the tentacles should move independently and be articulated.

Need an articulated halibut for 3d printing

I would like a 1 inch long halibut that is articulated. I would like the entire body to be articulated, and to be able to print it with a .40 nozzle. The blue fish (skate) is just an example of articulation; the model should look like the halibut I uploaded.

Convert 2D to multicolor 3MF For Bambu Studio

Hello, can you make this image into a 3mf file. I need the front and rear merged into one and the colors matched. I need it compatible to print from bambu studio. Would you be able to screen record the process as well so I can learn the process?

Custom pill organizer

3D Modeling Request – Smart Pill Organizer (Prototype) We are looking for a 3D modeler to design a 3D-printable smart pill organizer. This is a prototype for a project, so the design does not need to be perfect, but it must be functional, clean, and easy to print. ⸻ Overall Concept A 3-compartment pill organizer with integrated electronics. LEDs and wiring are housed in a separate bottom section, while the pill compartments sit on top and allow light to pass through from below. The organizer consists of 3 main printed parts + 3 lids. ⸻ Functional Requirements 1. Pill Compartments • 3 separate compartments, one for each time of day: • Morning • Noon • Night • Compartments should be clearly separated internally. • Each compartment has its own lid. ⸻ 2. Lid Design • 3 individual lids, one per compartment. • Each lid must include an engraved symbol: • ☀️ Sun → Morning •

Tithe house basement

I confirm I need assistance with Tekla Structural Designer (TSD), not Tekla Structures or Tekla Tedds. I’m modelling a simple residential basement. I have the project drawings and key inputs, but I need support with the correct modelling approach and analysis setup in TSD (slabs/walls/support conditions, load application, combinations, soil/foundation assumptions as applicable). Expected output: support with model validation (checks that the model is set up correctly and behaves realistically), and guidance to obtain a clear, defined set of design outputs/results (governing cases, utilisation, reinforcement outputs and any key checks required for reporting). Thanks, Bopanna

opportunity

3D Interior Design Images

I am in search of an exceptional 3D interior designer to craft visually stunning representations for Hostel and Staff Residence units within a secondary school building. Key focus areas include the domitory area and House master room as well as living rooms of the staff residences . The ideal candidate will have a proven track record in interior design, showcasing expertise in innovative use of materials, color palettes, textures, lighting, and furniture arrangements. Your artistic vision is essential in transforming these spaces into functional and visually appealing environments that enrich the educational experience for students and staff alike.

A 3d mask designer form 2d image

### Project: 2D Mask → 3D Printable STL I have a **2D image of a mask design** and **face measurements**. I need a **3D designer** who can convert this into a **wearable, 3D-printable STL file**. **What you’ll do:** * Convert the 2D mask image into a **3D model** * Adjust it using provided **measurements** * Deliver a **clean STL ready for 3D printing** **Important:** * This mask will be **printed and worn** * Fit, thickness, and comfort matter * I don’t need just renders — **STL only** **Requirements:** * Experience with **3D printing models** * Any software (Blender / Fusion / ZBrush etc.)

Looking for Kuka arm programer for ice carving

We are looking for an experienced programer with KRL and workvisual, polyscope as well as end-effector/tooling programming, path optimisation, cycle time reduction, robot safety zones/ fencing compliance that can create, adapt 3D models to ice carving (similar to rock and wood). This will be a constant job and we expect quick turn arounds and also sketch/ mock ups for clients approval.

Kaur's designs

We are seeking a talented 3D designer to bring Kaur's innovative concepts to life. This project entails creating visually stunning 3D designs that capture the essence of Kaur's aesthetic vision. The ideal candidate will possess a strong portfolio showcasing their proficiency in 3D modeling, texturing, and rendering. We aim to produce designs that not only look captivating but also resonate with the intended audience. If you are passionate about crafting exceptional 3D visuals and have a keen eye for detail, we invite you to submit your proposal for this exciting opportunity.

Bathroom Reno

I have layout and links to all the design elements. I’m struggling between 2 different floor tiles and a couple of different colour walls need visuals to make a decision.

3D Mask file correction and splitting

I have a mask stl file i want to edit, the only edit is to edit it so the eyes hole can be perfect with the eyes of the head scan I'll send, also to add a back cover for the mask, ill send you a picture of how the back should look, and lastly, to split some spercific parts where magnets will be added, I would have done it myself but my aunt died and I'm very busy with a whole lot, so please once you message and I reply you, please be active because I don't really have time. I need it ASAP. Once you submit your proposal, I'll send you the file immediately

STL file to fusion360 file

I have an STL file, I want to be able to edit it in fusion 360 like a normal part that was built on it or on inventor. No long talk, let me know if you can do it, no AI replies please

Fusion 360 tutoring

I'm looking for tutoring in creating a specific object in Fusion 360. The project involves designing a box carved with 3D topography and rendering it realistically in oak.

opportunity

Create a Vectororks 3d model of a venue from PDF and Images

We have a Scaled PDF of a venue and lots of images, we want to create a 3d model to be used in Vectorworks (Outputted in VWX with layers) of their event space ONLY. it doesnt have to be exactly perfect but a good representation from the images.

opportunity

3D interior sports retail shop with products

I am looking for someone who can do me a simple interior of a sports shop, more important is taking my product images and displaying them on shelves, footwear, t-shirts, etc Regards Paul Gallagher

زائنر کر ہو اور کریں۔

ہمیں ایک ماہر 3D ڈیزائنر کی ضرورت ہے جو اعلیٰ معیار کے 3D ماڈلز اور شاندار رینڈرنگ تیار کر سکے۔ مطلوبہ ڈیزائن جدید اور حقیقت کے قریب ہونے چاہئیں۔ پروجیکٹ کی کامیاب تکمیل کے لیے وقت کی پابندی ضروری ہے۔ فائل کی شکلیں (OBJ / FBX / STL) فراہم کی جائیں گی۔ اگر آپ کے پاس پچھلے کام کا کوئی متاثر کن پورٹ فولیو ہے تو براہ کرم اسے بھی شامل کریں۔ یہ پروجیکٹ تخلیقی صلاحیتوں اور تکنیکی مہارت کا بہترین مظہر ہوگا، اور ہم آپ کے شاندار کام کا منتظر ہیں۔