Wood Carving Projects

pre-funded

I need a 2 inch high articulated Noah along with an ark

We have some articulated animals we 3d print and sell, and we would like to have a Noah and a simple Noah's ark to go along the animals. Noah should have a white beard and carry a staff. The project specifications: 1. Noah (print about 1 inch, able to scale up or down a bit). Noah should be an older gentleman wearing a robe and carrying a staff (rod). 2. Ark The ark should look in the same character as the attached photo. It should look like it is made out of wood. The cabin must be small, with room on the deck for the animals. The ark should be printed at 300 mm long and 220 mm at it's widest point. I am open to other ideas about the ark. We want to be able to scale the ark up or down as needed. The attached photos are to give you an idea of the animals we want to put with the ark. The included green suited man is an elf we print and sell. Noah should be made in the same similar style, but have a beard and robe and look older. If we are happy with your work, we have many more articulated model animals we may hire you to design.

Barn renovation wood structural calcs and drawings

I need some structural designwork an calculations for the upper structure of our barn renovation. The downstairs structure is all blockwork (stone clad on the outside). The upper structure is timber frame and floor, with a timber roof. The complete upper structure is to be covered in zinc. Recommendations of which timbers to use etc in line with UK building regs. We require a full structural design and drawings for this structure. I already have some basic structural drawings etc to give an idea of whats required. Will attach following your reply.

An image of a wood made to look like it is made in aged brass

I need a photoshop expert to take 3 images I have of a wooden chair and make it look like it is made from aged brass, I need a very photorealistic image, with attention to detail

opportunity

Wordpress redesign

WordPress Website Revamp – Design & Layout Refresh We’re looking for a WordPress designer to carry out a design-led revamp of an existing website. The site is already built and live. This is not a rebuild, but it does require a new design theme and layout system to be created and applied across the site. Scope of work Update the current WordPress theme design and styling Create a new homepage layout (full layout redesign) Create a reusable layout for service/treatment pages Apply the new design consistently across the site Minor tidy-ups on remaining pages once the design is set Replace the existing text on service/treatment pages with new provided text Improve layout of blogs and image galleries where needed Design direction Earthy, textured feel Greens, linen, wood tones Calm, modern, well-spaced Not a generic salon layout — something considered and different Requirements Strong design eye Experience working with existing WordPress sites Able to follow a detailed brief Design changes must not slow the site down To apply Please send: Examples of WordPress sites you’ve designed or revamped A short note on how you’d approach this project No AI-generated responses and please don’t repeat the brief back.

opportunity

Barn renovation wood structural calcs and drawings

I need some structural designwork an calculations for the upper structure of our barn renovation. The downstairs structure is all blockwork (stone clad on the outside). The upper structure is timber frame and floor, with a timber roof. The complete upper structure is to be covered in zinc. Recommendations of which timbers to use etc in line with UK building regs. We require a full structural design and drawings for this structure. I already have some basic structural drawings etc to give an idea of whats required. Will attach following your reply.

Landscape Design for Potential customer

I need a designer experienced in landscape design. Our potential client is asking for "Wanting a design for front and back garden, looking to install fencing at front with garden / evergreen trees behind fence to block house a bit. Back garden redesign shed , to store wood look nice. And back garden lots of trees etc." We are situated on the mid north coast of australia so knowledge of appropriate plants also required. Would love to know what details are required to create something to potential client as part of quoting process and how much is the cost. Looking for a cheaper option than hiring local landscape designer.

Landscape Design for Potential customer

I need a designer experienced in landscape design. Our potential client is asking for "Wanting a design for front and back garden, looking to install fencing at front with garden / evergreen trees behind fence to block house a bit. Back garden redesign shed , to store wood look nice. And back garden lots of trees etc." We are situated on the mid north coast of australia so knowledge of appropriate plants also required. Would love to know what details are required to create something to potential client as part of quoting process and how much is the cost. Looking for a cheaper option than hiring local landscape designer.

pre-funded

I need a book trailer created for my book

I need a short, less than 1 minute book trailer video created for my book to market to book clubs. The trailer must include the title of the book, my name is the author, as well as be visually appealing using graphic effects and convey the tone of the book. Please see the example attached to this proposal. the book is about a young man from South Alabama that goes to the big city of Mobile to explore the world and finds himself eventually in the middle of the fighting in World War. I in France. The back of the book synopsis is: A Novel of Brotherhood, Sacrifice, and the Alabama 167th Infantry in the Great War In the shattered fields of France, where mud swallows boots and bullets write the fate of nations, a group of young men from Alabama stand shoulder to shoulder as part of the legendary 167th U.S. Infantry Regiment — the backbone of the 42nd "Rainbow" Division. From the dusty heat of the Mexican border chasing Pancho Villa to the blood-soaked trenches of Europe, Unknown Soldier: World War I is a powerful and emotional journey into the heart of courage and the cost of war. Follow James, a young officer from Thomasville, Alabama, as he leads his men through the unforgiving crucible of combat—from the Ourcq River and Château-Thierry to the final push at Saint-Mihiel. Through acts of bravery, impossible choices, and heartbreaking sacrifice, the story honors the real-life valor of the Alabama boys who helped turn the tide of World War I. Based on meticulous research and inspired by true events, David L. Preston's historical novel is more than a tribute—it is a haunting, intimate portrait of a generation lost to war and a reminder that the names carved into stone monuments were once living, breathing sons, brothers, and friends.

pre-funded

I need a Book Mockup for my book

I need a mock-up for my book to promote it to book clubs. The mock-up must include the front cover of the book, with the title and my name is the author prominently displayed in the mockup. It needs to be a JPEG or PNG file. I will provide a copy of the front cover, and any graphics needed. Please see the attached examples of what I'm looking for. the book is about a young man from South Alabama that goes to the big city of Mobile to explore the world and finds himself eventually in the middle of the fighting in World War. I in France. The back of the book synopsis is: A Novel of Brotherhood, Sacrifice, and the Alabama 167th Infantry in the Great War In the shattered fields of France, where mud swallows boots and bullets write the fate of nations, a group of young men from Alabama stand shoulder to shoulder as part of the legendary 167th U.S. Infantry Regiment — the backbone of the 42nd "Rainbow" Division. From the dusty heat of the Mexican border chasing Pancho Villa to the blood-soaked trenches of Europe, Unknown Soldier: World War I is a powerful and emotional journey into the heart of courage and the cost of war. Follow James, a young officer from Thomasville, Alabama, as he leads his men through the unforgiving crucible of combat—from the Ourcq River and Château-Thierry to the final push at Saint-Mihiel. Through acts of bravery, impossible choices, and heartbreaking sacrifice, the story honors the real-life valor of the Alabama boys who helped turn the tide of World War I. Based on meticulous research and inspired by true events, David L. Preston's historical novel is more than a tribute—it is a haunting, intimate portrait of a generation lost to war and a reminder that the names carved into stone monuments were once living, breathing sons, brothers, and friends. There is an opportunity for more work in the near future

Lifestyle Imagery for Intergas Boilers

Objective: Create high-quality lifestyle images that showcase Intergas boilers as part of modern, comfortable, and energy-efficient homes. The imagery should evoke warmth, reliability, and contemporary living, appealing to homeowners who value efficiency and design. Target Audience: Homeowners, families, and professionals seeking eco-friendly, cost-effective heating solutions. Tone & Style: Warm, inviting, and aspirational Clean, modern interiors with natural light Subtle emphasis on sustainability and smart living Key Elements to Include: Intergas boiler integrated into a stylish home setting (e.g., kitchen, utility room, or open-plan living space) People interacting naturally in the environment (e.g., family enjoying comfort, couple cooking, kids playing) Visual cues of energy efficiency (e.g., smart thermostat, eco-friendly touches like plants) Neutral color palette with pops of warmth (beige, soft greys, wood textures) Image Orientation: Landscape for website banners Portrait for social media posts Square for ads and product highlights Mood Board Keywords: Modern | Cozy | Sustainable | Family | Smart Home | Minimalist

CAD scaled drawings

Hello, can you please design a scaled CAD drawings of 20ft wood clad shipping container with 4 angles. I can provide the photos. Thanks

opportunity

Some visualizations with furniture in a room

Hi there, We have a room plan and an old render with furniture in that room (just an image, not the root file). We need to replace that furniture with one with a different colour, and we want several views so each furniture part will be visible.. The items are listed in the inventory (all cabinets - 2500 mm tall + wood addition for one more meter above). All colors are cashmere except for the black wall and the mirrors. We don't need exceptional details but a nice and professional look will be good. We need this ready latest on Sunday evening - sau 21.00 EET. For sure will be drafts and then minor changes so let's not leave everything on the last moment. Looking forward for your proposals.

opportunity

Barn renovation wood structural calcs and drawings

I need some structural designwork an calculations for the upper structure of our barn renovation. The downstairs structure is all blockwork (stone clad on the outside). The upper structure is timber frame and floor, with a timber roof. The complete upper structure is to be covered in zinc. Recommendations of which timbers to use etc in line with UK building regs I already have some basic structural drawings etc to give an idea of whats required. Will attach following your reply.

pre-funded

Create 2D manufacturing drawings from a Sketchup model

I've got a design for a staircase to be manufactured from steel and wood. I need you to convert the 3D SketchUp model into a set of engineering drawings (.pdf format) that I can send to the workshop to get the steel parts manufactured. The drawings should show - all steel parts that need to be cut and drilled from bright mild steel. These are tagged as "Staircase>Steel" and its subcategories, and "Railings>Spindles". - how the parts of the upper stringers need to be welded together at 30-degree angles. - how the brackets need to be fixed (welded) to the applicable parts - All parts to be finished in matt black powder coating I do not need drawings for the wood parts at the moment. Nothing tagged as "House" or its subcategories should be included in the drawings. Download the SKF file here: https://www.dropbox.com/scl/fi/iiuz58kcbs3449ruonx0f/20251108-Stairs.skp?rlkey=ugk8fzusf0clnx3tvpae4qmpa&dl=0

opportunity

Small scale biomass gasifier

I am looking for a mechanical designer or engineer to design a small-scale wood gasifier system and create technical drawings/plans for fabrication. I will provide the concept and functional requirements, and you will design the system using your own dimensions and engineering judgment. The design should include the reactor, cyclone, piping, filters, and basic airflow system.

BIM modelling – 10 elevations of office wall (WoodNLite)

Project description We’re WoodNLite (woodnlite.com) and need an experienced BIM modeller to produce BIM-ready files for a wood-and-glass office partition system. Scope: 10 elevations (architectural elevations of the partition wall types) plus parametric profiles, door and sidelite families, and the detailed hardware variants listed below. Files must be accurate, production-ready, and easy to specify by architects and contractors. What we need Deliver high-quality BIM assets for our wood-and-glass partition system that can be dropped into Revit (and exported to IFC/DWG). Work includes: 10 elevation drawings / 3D elevation models of typical partition wall conditions (architectural scale). Parametric profiles for wood rails and stiles (so widths & glass lite patterns can be adjusted). Door and sidelite families: Door + one sidelite Door + two sidelites (one either side) One as above withPair doors Each of the above with: overhead closer, built-in bottom rail closer, and floor closer variants (so 3 hardware variants per elevation where applicable). Glass panes, gaskets, and simple glass hardware represented (not engineering-level connections unless requested). A materials/finishes schedule (names and simple parameters: wood species, glass type, finish). Exportable files: native Revit .rvt and .rfa families, IFC, DWG (plans/elevations/sections), and optional SketchUp/ArchiCAD if available. Level of detail: suitable for specification and coordination (LOD 300 / BIM for design documentation). Please state if you propose LOD 350/400 and pricing for that. File & delivery expectations (Acceptance criteria) Cleanly named families and views (consistent naming convention). Fully parametric profiles for stiles/rails and hardware (users must be able to change rail width and pull handles and locking ladder pull). One Revit project file containing the 10 elevations with correct scale and annotation (and separate family files for doors and sidelites). IFC export that preserves geometry and material names. DWG elevations and a simple PDF set (for quick review). A short PDF or text readme listing model assumptions, unit settings, and how to edit the parametric options. Models checked for geometry errors (no overlapping solids; families should be workset-ready). Provide 3 sample renders/screenshots of representative elevations. Sample elevations / variations to model (from us) Door + two sidelite (one each side) Door + two sidelites (free swing) Door + two sidelites (overhead closer) Door + two sidelites (built-in bottom rail closer) Door + two sidelites (floor closer) (These are examples — include additional typical partition conditions among the 10 elevations: full-height, partial-height, fixed glazed panel with wood stiles, corner condition, entry with transom, etc.) What to quote / include in your proposal Fixed price (or hourly with estimated hours). Do not assume a timeline from us — include your proposed lead time in your bid. What file formats you will deliver (minimum: Revit .rvt/.rfa, IFC, DWG, PDF). Your proposed LOD and whether you can deliver optional LOD upgrade and at what price. Short portfolio of 2–3 previous BIM projects, preferably partitions, curtain walls, or bespoke joinery families. Short note on the Revit version you’ll use and whether families will be backward-compatible (or if you’ll supply multiple versions). Confirmation you will supply a short readme and basic usage instructions. Any assumptions or exclusions (e.g., not providing MEP coordination, structural connections, shop drawings). Required skills Expert Revit BIM modelling (families & parametrics) — required IFC export and DWG production — required Experience creating LOD300+ architectural families and parametric profiles Good understanding of architectural joinery, doors, and glazing details Clear communication, timely updates, and delivery of a packaged file set Selection criteria We’ll evaluate proposals on: Relevant BIM portfolio & previous experience with partitions / joinery Clarity of deliverables and format compatibility Price vs scope and LOD offered Estimated lead time (please include in bid) and communication plan How to apply Reply with: Short cover note (1–2 paragraphs) Deliverable checklist confirming formats you’ll provide Fixed price (or hourly + estimated hours) and any optional LOD pricing Example files/screenshots or links to past work (Revit families preferred) Your proposed lead time We’ll shortlist bidders and may ask for a paid trial (1 elevation + 1 family) to confirm quality before awarding the full job.

Two Sprue Type Designs

We need two vector designs that will be suitable for cutting out of a wood board. These should be of a sprue for a car model. Each board should be 8 feet wide and 4 feet tall. This should include a 6 inch border around the edge. They should contain a number of car parts, including wheels, a steering wheel and various recognisable engine parts. There should be about 5 to 7 parts per design. They should all be interconnected and appear like they would snap out as would be in a sprue (please see attached images). The designs are going to be CNC milled out of wooden sheets. Therefore they should be 2D and have single vector paths that can be followed by a machine. Two colours can be used to demonstrate where the material would be and where the cut outs would be.