Solidworks Tutor Projects

Academic Indonesian Tutoring & Translation

I’m looking for a native-level Indonesian professional who can do two things in parallel: guide a small group of absolute beginners toward academic fluency in Bahasa Indonesia and translate our English learning materials into polished, formal Indonesian. The students are starting from scratch but need to reach a point where they can read journal articles, write research summaries, and participate in seminars conducted in Indonesian. Because we’re not tied to a rigid deadline, you can suggest the most effective pace—weekly or bi-weekly sessions are fine as long as progress is clear and measurable. Here’s what I need from you: • Structured online lessons built around academic vocabulary, formal grammar, and writing conventions, delivered via your preferred platform (Zoom, Google Meet, or similar). • Homework, quizzes, and short writing assignments that reinforce each lesson. • Periodic progress reports so I can track how well the group is moving toward BIPA level-2 (or an equivalent academic benchmark). • Accurate English-to-Indonesian translations of all course handouts, slides, and future documents, complete with a mini-glossary for technical terms. Acceptance criteria • By the end of the program the students should be able to pass a BIPA level-2 test or demonstrate comparable competence. • Random QA checks on your translations must show at least 95 % accuracy against the source content in meaning, tone, and academic style (KBBI, EYD). If you hold a BIPA teaching certificate, a linguistics degree, or have published academic translations, please highlight that experience and share a short sample lesson plan or translation excerpt. I welcome your ideas on lesson frequency, preferred teaching tools, and any additional resources you’d bring to the table.

Skilled IELTS Tutor Needed for Teenager

Looking for an Experienced IELTS Teacher (Secondary School Student) We are looking for a qualified and experienced IELTS teacher to provide structured online lessons for a secondary school student preparing for the IELTS exam. Student Profile: Secondary school level Intermediate English proficiency Goal: Achieve a high band score for future academic purposes Requirements: Proven experience teaching IELTS Academic or General Training Strong background in teaching teenagers (secondary school students) Ability to teach all four components: Listening Reading Writing Speaking Familiar with official IELTS marking criteria and band descriptors Ability to provide structured study plans and measurable progress tracking Experience in correcting Writing tasks with detailed feedback Conducting mock speaking tests with band estimation Qualifications: Degree in English, Linguistics, Education, or related field TESOL / CELTA / TEFL certification (preferred) Documented track record of helping students improve band scores Ability to provide sample materials or references upon request Teaching Format: Online sessions (Zoom or similar platform) 2–3 sessions per week (60–90 minutes each) Clear homework policy and structured assignments Regular progress reports Professional & Security Expectations: Professional communication at all times Respectful and age-appropriate teaching style Sessions must be recorded for quality and safety purposes No off-platform communication with the student Parent/guardian will supervise or monitor sessions To Apply, Please Include: Your IELTS teaching experience Previous student results (if available) Your proposed teaching plan Hourly rate Availability schedule We are looking for a serious, committed educator who can support the student’s academic growth with professionalism and integrity.

Marketing and Sales support in Australia

We require a confident individual who has sales and marketing experience located in Australia to assist us with new channel lead gen. We are an online tutoring company and have sold thousands of hours to date. Please only apply if you live in Australia.

opportunity

Produce SolidCAM CNC File

Hi, I have a simultaneous five axis CNC milling machine and I run the complete SolidCAM CNC programming package on Solidworks. All the latest versions. I have an organic front suspension component to machine and need this CNC machining routine programmed in SolidCAM.

Create DSTV NC1 files of a solidworks welding assembly

I am looking for Someone to convert a solidworks weldment assembly into NC1 files. The assembly consists of up to 20 members. This is a repeating project which will need to be done most weeks. Below is a sample assembly https://hillinsulation.sharepoint.com/:u:/s/GRPs74/IQB87m9Q7DnuSrQWgNB0lfxkAWxeCtUdflywOaSMxLmWm4M

LSAT Tutor

Looking for a LSAT Tutor to tutor Lsat student(s)*&. Potential to work with 2 or more students based on performance. Need proof of LSAT score. Immediate start next week for successful candidate. Tutor will tutor students to gain best lsat score possible. Tutor will also review prior LSAT practice questions and address misconceptions by students and assist with resources to grasp concepts and be familiar with content of the LSAT.

Custom 3D Product Designer

I'm looking for an experienced 3D designer to create custom designs for wall mounts and holders. Key requirements: - Original and innovative designs - Suitable for manufacturing - Detailed specifications Ideal skills and experience: - Expertise in product design, especially for wall mounts and holders - Proficiency in 3D modeling software (e.g., SolidWorks, Rhino) - Strong understanding of manufacturing processes and materials - Attention to detail and creativity Please include a portfolio showcasing relevant work.

Need excel file updated

Have an excel file (finance sheet) for basic private tutoring. The tabs need correcting and updating (and two need tabs). This is what needs to be done: Need an expereince excel specalist (not chat gpt - tried it) When I inset a row it does not keep the formula – it does not work for each tab For F-2-F tab (face to face) add: • How many students after column C (Subject) • This will affect overall sum of Grand total (term 1 x tern 2 x tern 3) Tutor online • When I inset a row it does not keep the formula – it does not work. • Overall Profit and loss (green font at bottom) for term 1 does not work (J takeaway K = L) • Need a column after P (profit and loss term 2) that shows total salary for each tutors for the year (J +N). At the bottom in green font it should have total salary added up for all tutors. • Need a column after the one above which shows the profit from just tutoring – will be ET invoice term 1 (K) = ET invoice term 2 (O) Year 11 Need a new tab (called Year 11 overall ) that will include: Tutors • Tutors (e.g. name of tutors) • Subject (English Langue or Literature) • Term 1 (e.g. 12 weeks) • Term 2 (e.g. 18 weeks) • Tutors fee per hour (e.g. £40) • Tutors how many lessons per week (e.g. 2 ) • Overall all total tutors (e.g. how many tutors) Students • Price per student (e.g. £32) • Overall how many students (e.g. 28) • Term 1 (e.g. 6 weeks) • Term 2 (e.g. 12 weeks) • Term 1 student payment (e.g. £300) • Term 2 student payment (e.g. £300) • Profile made (when you take away all tutors fees from students fees for term 1 and term 2) Overall cost • Total payments for tutors fees (total salary) • Total payment for tutoring (e.g. term 1 and term 2 added + how many students) • Net profit ( from the two bullet points above) Need a Finance Summar Dashboard Revenue • Face-to-face revenue • Net profit face-to-face • Online tutoring revenue (term 1 + term 2) • Net profit for online tutoring Costs • Online tutor salaries (term 1 + term 2) • Room hire costs (all terms) Net profile • English teachers Will send excel file when hired.

Mechanical CAD Design — Junior Training Plate (Weighted)

Hello, I’m developing a junior training aid (sports) and require a mechanical CAD engineer to produce functional files for prototype manufacturing. Key requirements: • PA12 SLS two-part enclosure • Internal steel ballast insert • Recessed strap channels • Rubber grip pockets • Safety-focused rounded geometry Deliverables required: • STEP file (assembly) • STL files (top & bottom shells) • 2D/3 dimensioned drawings • Exploded assembly view Important: This is a functional prototype Please confirm: 1. Software used (SolidWorks / Fusion / similar) 2. Experience designing for SLS nylon or sports products 3. Estimated timeline for first draft

Fusion 360 tutoring

I'm looking for tutoring in creating a specific object in Fusion 360. The project involves designing a box carved with 3D topography and rendering it realistically in oak.

MSc Psychology Research Proposal Review Needed

Description: I need an experienced research methods tutor/consultant to review my MSc Psychology research proposal (approximately 2,000 words) and provide detailed feedback. What I Need: 1. Review of full proposal (all sections) 2. Assessment of methodological soundness 3. Identification of any gaps or weaknesses 4. Specific suggestions for improvement 5. Written feedback document Required Qualifications: ∙ MSc/PhD in Psychology or related social science ∙ Strong background in quantitative research methods ∙ Experience supervising/reviewing student research Timeline: ASAP Please include in your proposal: ∙ Your relevant qualifications/experience ∙ Estimated turnaround time

opportunity

SolidWorks 3D model from ship blueprints (PDF) → laser-cut

Experience Level: Expert Estimated project duration: 3 - 4 weeks I need an experienced SolidWorks CAD designer to recreate an 86m inland vessel (scale 1:60) from scanned PDF shipyard drawings, including the hull lines plan. Goal: produce a laser-cut plywood model kit (tabs/slots) with a frame/bulkhead hull structure for accurate hull shape. Outer appearance should be realistic; internal structure should be strong. The model will become RC, so include space for battery/components (rough layout is enough). Required Output • SolidWorks Parts (.SLDPRT) for all components • SolidWorks Assemblies (.SLDASM) with logical sub-assemblies • 2D DXF exports (laser-cut ready) for all wooden parts • Part numbering for laser engraving (to prevent build mistakes) Critical Requirements • Hull frames match the lines plan accurately • Parametric thickness control: • Longitudinal spine thickness adjustable • All cross frames thickness adjustable via one parameter • All slots update automatically • Must be done in milestones with 3–4 review checkpoints for feedback SolidWorks for “professional use” or “for makers” is fine either way. Read-check (mandatory): How many years of SolidWorks experience do you have, and do you have experience with wooden kits OR ship drawings/lines plans? Create a super simple example (in Solid Works) based on the line plan in the attachment. Do this for 3 or 4 frames and then add the skin over them. Add the assembly and parts to your offer. If this is not done, I will not consider your proposal. A few drawings have been added as examples. The rest will be shared once the assignment has been finalized.

I need 3D desiger using solidworks software

We are seeking a proficient 3D designer with expertise in SolidWorks to assist in the development of innovative designs for our upcoming projects. The ideal candidate will possess a strong understanding of 3D modeling, simulation, and product visualization. Responsibilities include creating detailed 3D models, assemblies, and technical drawings, as well as collaborating with our engineering team to refine concepts. A keen eye for detail and creativity is essential. If you are passionate about design and possess a solid background in SolidWorks, we encourage you to submit your proposal for consideration.

CAD Designer Needed to Create 3D Printable Modular Pieces

Job Title: CAD Designer Needed to Create 3D Printable Modular Marble Run Pieces Description: I am looking for a mechanical CAD designer to help create a prototype design for a modular marble run. The goal is to design several marble run pieces that can connect and attach securely to each other so I can 3D print them and test the concept. Scope of Work: • Create CAD designs for modular marble run pieces • Ensure pieces can connect together easily and securely • Design tracks so a standard marble rolls smoothly through the system • Parts must be optimised for 3D printing • Provide files suitable for prototype testing Key Requirements: • Connection system between pieces (for example: clip fit, slot system, or similar) • Smooth slopes so the marble rolls consistently • Parts designed so they can be printed without complex supports if possible Deliverables: • 3D CAD models • STL files ready for 3D printing • Native CAD files if available (Fusion 360 / SolidWorks / similar) Project Notes: • I will provide sketches and explain the concept • This is for a prototype to test the idea, not final production design • Open to design suggestions from the engineer Skills Required: • Mechanical CAD design • Experience designing 3D printable parts • Knowledge of tolerances and snap-fit or modular connections Budget: Open to proposals (fixed price preferred) NDA Requirement: Freelancer must sign a simple NDA before sketches or CAD details are shared. All CAD designs and files are the property of the client.

opportunity

Yacht model (.step)

Hi there, I’m looking for an expert in SolidWorks or Fusion 360 who can take a yacht scan / DXF-derived geometry and turn it into a clean, accurate 3D CAD model, then deliver a STEP file. What I need: - Import and clean up the scan/DXF geometry (remove noise, fix gaps, ensure usable profiles) - Build a proper 3D solid/surface model (as appropriate) - Export final deliverables: STEP (.stp/.step) + native CAD file (SLDPRT/SLDASM or F3D) - Maintain dimensional accuracy and sensible feature/geometry structure Project notes: - This is from a yacht scan (marine application), so accuracy and smooth surfaces matter - I need a quick turnaround and clear communication - Please confirm your availability and estimated delivery time when you reply To quote, please include: - Your relevant experience (scan/DXF to CAD, marine/yacht work if applicable) - What you need from me (files, target units, tolerances, required thicknesses, reference dimensions) - Fixed price + delivery time - Any risks/assumptions (e.g., if the scan/DXF is incomplete) I can share the files as soon as you confirm you can start immediately. kind regards, Declan

Modify Doogee S80 Phone Case STL with Custom Hand Loop

I have a Doogee S80 phone and a 3D model of its case (STL file available on Thingiverse: https://www.thingiverse.com/thing:3231543). I need a freelancer to modify the case to include a custom ergonomic hand loop and extend one edge. Requirements: Extend one edge of the phone case by 4 cm. Design and integrate a hand loop: Runs from the top left extended edge to the bottom right edge. 4.5 cm clearance from the body of the case to fit the hand comfortably. 12 cm usable width for hand placement. Ideally S-shaped to avoid obstructing the camera. Include a reinforced aperture/hole at the lower section of the handhold for attaching a keyring or chain. Ensure the design is 3D-print ready and structurally strong. Deliverables: Modified STL file ready for 3D printing. Optional: Preview render for approval before final delivery. Skills Required: CAD/3D modelling experience (Fusion 360, SolidWorks, TinkerCAD, or similar). Experience with custom 3D modifications and 3D printing optimization. Attention to detail and precision to ensure proper fit and function. Budget: £20 (fixed price) Deadline: ASAP Additional Notes: I’d like the freelancer to start immediately. Clear communication and fast delivery are important as I plan to print the model as soon as possible.

opportunity

SolidWorks 3D model from ship blueprints (PDF) → laser-cut

I need an experienced SolidWorks CAD designer to recreate an 86m inland vessel (scale 1:60) from scanned PDF shipyard drawings, including the hull lines plan. Goal: produce a laser-cut plywood model kit (tabs/slots) with a frame/bulkhead hull structure for accurate hull shape. Outer appearance should be realistic; internal structure should be strong. The model will become RC, so include space for battery/components (rough layout is enough). Required Output • SolidWorks Parts (.SLDPRT) for all components • SolidWorks Assemblies (.SLDASM) with logical sub-assemblies • 2D DXF exports (laser-cut ready) for all wooden parts • Part numbering for laser engraving (to prevent build mistakes) Critical Requirements • Hull frames match the lines plan accurately • Parametric thickness control: • Longitudinal spine thickness adjustable • All cross frames thickness adjustable via one parameter • All slots update automatically • Must be done in milestones with 3–4 review checkpoints for feedback Read-check (mandatory): How many years of SolidWorks experience do you have, and do you have experience with wooden kits OR ship drawings/lines plans? Include 1–3 relevant examples. A few drawings have been added as examples. The rest will be shared once the assignment has been finalized.

Odoo tutor wanted

I'm using Odoo Online 19 for some months now and I have lot's of question about how I can change certain behaviour using Studio and XML changes etc. I'm looking for someone with a lot of Odoo experience who can answer my questions and help me out from time to time. I pay 20,- euro per hour for Teams session with shared screen. I'll show you the problem and you tell me the solution. Do you speak English and are very experienced with Odoo Online, get in touch. I only respond to individuals, not companies who provide their services

opportunity

Clean rebuild of working 3D prototype into production-ready CAD

I’m looking for an experienced CAD engineer or product designer to take my existing 3D design files and rebuild them properly from scratch, ready for production in metal. Background • I designed all parts myself and have already validated the functionality by 3D printing and physical testing • Everything works, but the CAD files are crude and not production-ready • Tolerances are largely guesswork • Parts were developed iteratively by adding and removing features, so many models are a hodgepodge rather than clean parametric designs What I need • Recreate all parts cleanly in a professional CAD system • Apply sensible, engineering-grade tolerances suitable for CNC machining in aluminium • Produce fully constrained, parametric models • Assemble parts where appropriate to check fit and function • Deliver clean STEP (STP) files suitable for manufacture Workflow • I would want to 3D print the rebuilt parts first to validate everything before committing to metal • Expect some iteration after first review/print • I can supply existing STL/STEP files, photos, and functional explanations Ideal candidate • Strong mechanical CAD experience (SolidWorks, Fusion 360, Inventor, Creo, or similar) • Comfortable designing for CNC machining in aluminium • Able to think like an engineer, not just redraw geometry • Experience rebuilding rough prototypes into production-ready designs Please reply with • Brief overview of your relevant experience • CAD software used • Examples of similar “prototype to production” work This is a serious engineering tidy-up rather than a simple file conversion, and I’m looking for someone who enjoys turning working prototypes into elegant, manufacturable designs. Next steps Once I’ve reviewed responses and shortlisted suitable candidates, I will ask for a simple NDA to be signed before sharing any detailed files, drawings, or samples.