Costume Construction Projects
Looking for freelance Costume Construction jobs and project work? PeoplePerHour has you covered.
opportunity
3D scanner for construction
I seek to develop a 3D scanning application for architectural and construction purposes. The app must utilize 3D scanning technology to digitally capture physical spaces such as building sites, structures or areas of renovation. It is imperative that the captured 3D scans accurately visualize dimensions, scale and spatial configurations within the digital model. The app's programming and coding architecture should enable users to manipulate and analyze the 3D scans, facilitating dimensional measurements, technical specifications extraction and schematic drafting. Developers proficient in 3D computer graphics, spatial data processing algorithms and software engineering principles are ideally suited. Experience designing applications that translate real world scenarios into interactive and information-rich virtual environments will be highly valued. User experience and functionality and optimization must balance precision, practical usability and workflow efficiency. Visualization features allowing overlaying of schematic drawings, annotations and measurement tools on the 3D scans are crucial. Database integration for archiving, retrieving and sharing scans between project teams could enhance collaboration if developed. Overall the app aims to digitize construction project planning, review and implementation through an immersive and meticulously detailed 3D visualization platform.
7 days ago12 proposalsRemoteopportunity
Construction Traffic Management Plan
Hi All, we have secured PP for a new dwelling and need assistance with producing a Construction Traffic Management Plan (we can provide DWG etc) to discharge a condition. Condition as follows; Construction Traffic Management Plan for that phase has been submitted to, and approved in writing by the Local Planning Authority. The statement shall provide for at a minimum: • Detailed work programme / timetable. • Details of the days and hours of operation of the site • Site HGV delivery / removal hours to be limited to between 10:00 – 16:00 • Detailed routeing for demolition, excavation, construction and abnormal loads. • Supply of pre-journey information on routeing and site restrictions to contractors, deliveries and visitors. • Detailed plan showing the location of on-site stores and facilities including the site compound, contractor & visitor parking and turning as well as un/loading point, turning and queuing for HGVs. • Breakdown of number, type, size and weight of vehicles over demolition & construction period. • Details of debris management including location of wheel wash, programme to control debris spill/tracking onto the highway to also include sheeting/sealing of vehicles and dust management. • The approved Construction Method Statement shall be adhered to throughout the construction period for the development. Let me know if you can help?
3 days ago14 proposalsRemoteurgent
Website Design Required for a Construction Company
I seek an experienced web designer to craft a modern and engaging website for my growing construction firm. The site should utilize clean and minimal visual design balanced with impactful imagery to convey our dedication to quality workmanship. Key pages needed include an about us section highlighting our team's extensive industry expertise and commitment to customer satisfaction, as well as separate pages detailing our services, portfolio of completed projects with photos and testimonials, and contact details with an intuitive form for potential clients. Easy navigation between these sections is paramount, employing prominent yet unobtrusive tabs or similar method across a responsive design optimized for viewing on desktop and mobile browsers alike. Content must be written in a clear, straightforward style emphasizing our strengths while avoiding industry jargon that could confuse casual visitors. Additionally, the site should integrate optional future features such as a blog with construction tips, a staff directory, and web forms to request quotes or schedule appointments. Submitters should have proven experience designing multipage websites for trade or B2B clients, with demonstrable skills in user experience design, HTML/CSS coding, and ensuring Section 508 accessibility standards are met. A well organized, commented codebase will be essential for my non-technical review and potential ongoing maintenance. Examples of similar past work showcasing design and development abilities are strongly encouraged. Please provide estimated timelines and costs for this project in your response. I welcome creative solutions that highlight
2 days ago104 proposalsRemoteExpires in 27urgent
Quotation for Basement Construction
I require expert assistance drafting a quotation for building an underground dwelling space on a residential property. The proposed basement construction would involve excavating soil to create a foundational structure beneath the existing residence. Skilled tradesmen proficient in this specialized field are sought to accurately estimate costs for all necessary materials and labor. Quotations should include line item pricing for excavating machinery rental, structural shoring systems, waterproofing membranes, concrete pouring and finishing, drainage systems, electrical rough-in, and any other anticipated expenditures. Adherence to all applicable building codes is imperative. Experience designing and installing durable, long-lasting basement spaces preferred. Ability to clearly convey budget projections and outline payment terms a must. Knowledge of local permitting processes an asset. P.S. I am not looking for a contractor. I just need expert assistance in providing a detailed quotation if that makes sense.
20 days ago13 proposalsRemoteExpires in 10Assisted Living Residential Building
I'm in need of a professional who can handle the planning for a multi-family residential building construction. This involves creating a comprehensive blueprint for the construction, including the layout of the building, number of units, and common areas. I need an architect design/layout of a building with 80 rooms/units. Each unit/room of 300 square feet. Please take a look of available land measurements and other guidelines
4 days ago12 proposalsRemotePattern and sample support
Project Summary: Empire Bias Dress Design Project Overview: We am in the process of creating a new collection for our brand and require support to ensure timely completion. I have multiple designs and need a freelancer to take on one specific design: an empire, bias dress. Scope of Work: Pattern Creation: Develop the pattern for the empire, bias dress based on our brand sizing. Toile Construction: Create a toile (prototype) to perfect the fit and make any necessary adjustments. Sample Production: Construct the final sample using the provided fabric. Key Responsibilities: Independently manage each step of the process from pattern creation to sample production. Ensure each step is signed off before proceeding to the next. Share the completed toile and photographs by post for review and approval. Requirements: Proven experience in pattern making, especially for bias-cut dresses. Ability to create accurate patterns based on brand sizing. Skills in constructing toiles and making fit adjustments. Proficiency in sewing and producing high-quality garment samples. Strong communication skills to update on progress and share timely updates. Materials Provided: Design sketch and construction instructions. Final fabric for sample production. Toile fabric and all other costs must be factored into your fee. Approval Process: Each step (pattern creation, toile fitting, final sample) must be reviewed and approved before moving forward. Sent to UK address. Deliverables: Completed pattern based on brand sizing. Fitted toile with necessary adjustments. Final sample made from the provided fabric. Timeline: Immediate start required to meet the collection launch deadline. Deadline for final garment is 10 June. All steps to be completed promptly with regular updates and approvals. If you have the skills and expertise to take on this project, please apply. We look forward to collaborating with you to bring this design to life! Fee: open to offers, please include a breakdown of your costs in your proposal.
3 days ago11 proposalsRemoteopportunity
Structural Engineer needed for workshop project
I'm looking for a structural engineer (certified with PI insurance) who can complete calculations for 3 retaining walls & a foundation which will make up a garden workshop. The images attached to the listing show the space, and existing masonry. I can share sketches I have made with provisional details of the foundations, retaining / decking supporting walls and outline dimensions in respect of our proposed garden workshop / shed. At this stage my concern is whether the proposed foundations for the retaining walls and workshop (all to be constructed using concrete blocks) are suitable from a structural point of view. I'm looking for the following outputs which I can subsequently send to my local council for them to review in order to approve the works; - Design the specification for the 3 retaining walls, and concrete slab which the workshop will sit on (also considering the loading of decking over the top) - Produce structural calcs to prove the stated design will be adequate & safe. - Produce drawings to clearly communicate the construction. Some further thoughts: The top of the existing rear retaining wall is 2250mm above its foundation but could need to be raised slightly to accommodate the required drainage fall on the workshop roof. Although the tallest of the earth banks needing to be ‘retained’ is 1900mm, the proposed new side retaining walls would need to be a little higher than this to act as supports for the possibility of a deck to be constructed over the workshop. I believe that the construction of a garden workshop measuring 5m long by 3m wide and being less than 2.5m high would be allowed under ‘permitted development’ and so not be subject to either planning or building control regulations. However, we are unsure whether these or other regulations may apply in respect of the proposed retaining walls which would also possibly be used to support a deck to be constructed over the workshop. I think it would be best if we simply leave the existing rear retaining wall in place (ie without disturbing it since it has been in place since the late 1980’s) and construct a new rear retaining wall immediately in front of it. That way the existing rear retaining wall would become part of the ‘retained ground’ immediately behind a new rear retaining wall. A suitable gap between the old and new rear retaining walls could then enable appropriate drainage to be incorporated into the design & construction of the new retaining wall before being back-filled. In respect of the possible future loading which would be imposed on the two side retaining walls by the installation of decking, I think that since these loads would essentially be purely composed of the dead weight of the decking structure they would in fact be beneficially adding to the overall weight of the side retaining walls. This is on the assumption that the side retaining walls are designed as being simple gravity retaining walls. In summary, I think I need to construct two new side retaining walls (such that they could also support a decking structure spanning across them) and a new rear retaining wall in front of the existing one. Actually, as can be seen from the drawing and photo of the south retaining wall, this structure would not really be retaining much ground behind it at all in comparison to the north retaining wall and so could essentially perhaps be designed as a supporting wall to carry the load from the decking structure. Lastly: Please could you provide proof of your certification/qualification, and current valid PI insurance with your proposal.
12 days ago13 proposalsRemoteSeamstress needed for start up bridal brand
I need an experience seamstress who is knowledge in bridal wear and corset construction to help make sample dresses for my brands first collection of 5 bridal looks. Designs and patterns will be given however I’m also looking for someone to collaborate with me regarding fine details eg garment finishings etc.
17 days ago3 proposalsRemoteSetup Google Ads + Conversion tracking for construction company
We have a new (ish) venture where Google Ads setup is required, we would need you to monitor it for the first week and make sure all running correctly. This to generate leads including phone calls and form fills. Google Shopping is not required. Window of 48 hours to complete the work.
a month ago35 proposalsRemoteSetup Google Ads - Conversion tracking for Construction Company
We have a new (ish) venture where Google Ads setup is required, we would need you to monitor it for the first week and make sure all running correctly. This to generate leads including phone calls and form fills. Google Shopping is not required.
a month ago21 proposalsRemoteopportunity
Sales leads for Health and Safety Consultancy (UK)
We are looking for a strong sales person/company that can help generate and convert sales lead for my health and safety consultancy service. We provide a range of sevices to ensure UK businesses are compliant with UK health and safety law. We are looking to finding more business principally in the property, construction, education sector but will also explore a number of other industries. We are looking for someone that can increase our clients. We are only looking for UK based businesses/freelancers only who have a strong and demonstrable record in converting sales. Must be fluent in English. Full plan / terms and fees to be discussed and agreed.
2 days ago10 proposalsRemoteSEO Freelancer
We are a PPC agency looking for a UK based SEO Specialist to partner with. Please send me your proposals. Must be willing to travel to our client meetings around London when needed. Must have english as first language and understand the construction industry
19 days ago33 proposalsRemoteTake website offline and then re-deisgn
hi have ownership of a domain on godaddy. i want to take the website offline and make it "one page", but the logo on and put something like "under re-construction". hope you can help. many thanks.
a month ago63 proposalsRemoteMinimalistic Icon Logo Creation
I require a freelancer proficient in graphic design to create a sleek, minimalistic icon-based logo. This logo will symbolize my company, so it's crucial for it to have a clean and sharp aesthetic. Ideal qualifications: - Strong graphic design abilities. - Experience creating minimalist style visuals. - Understanding of how to construct powerful icon-based logos. - Familiarity with symbol representation for businesses. As this logo will play a vital role in my brand's image, I encourage applications from individuals with a portfolio that demonstrates their ability to meet the brief.
5 days ago29 proposalsRemoteFloor plan; elevations
I need technical drawings completed for a bathroom design scheme: - floor plan (this needs to include tile layout) - elevations - drawing showing the construction of tile cubicle Essential: - knowledge of UK building regs - technical drawing (CAD preferable) -space planning To provide the raw files and as PDF. Ideally someone can turn this around very quickly using the information I will provide which will include sketches, dimensions etc.
13 days ago33 proposalsRemoteMarketing and Sales Plan Writer for Training Company
We seek an experienced professional to help us develop a comprehensive marketing and sales plan for our training company. The ideal candidate will have a proven track record in writing compelling marketing and sales strategies and will be able to provide valuable insights and identify any gaps or areas for improvement. Responsibilities: Conduct an online meeting with myself to understand our strategies and objectives Develop a marketing and sales plan based on the information provided Advise on any gaps or missing elements in our current strategies Requirements: Proven experience in writing marketing and sales plans Strong understanding of marketing and sales strategies Ability to provide constructive feedback and recommendations Excellent communication skills
5 days ago16 proposalsRemoteAutoCAD Technician required (Birmingham) - short contract
I'm looking for an AutoCAD technician to help support the logistics team for a major construction site in the Curzon Street area of Birmingham. The contract will likely be for 2-3 months, but could well continue. The candidate will need to provide their own Laptop / Computer and CAD software and will be working from within the site offices alongside the 4D (Synchro) Engineer and logistical team to produce site plans, timeslices etc. Ideally 5 days per week working form site office. But, there may be an option for hybrid working (4 days in office, 1 remote etc). Please respond with your CV, experience and availability. Many thanks
6 days ago1 proposalOn-site in Birmingham, GBWebsite Revamp in Node.js
We seek a web developer to revamp its static website into a dynamic and modern Node.js application. The new website will showcase our construction services, engage potential clients, and effectively represent our capabilities. Project Goals: Modernized Platform: Build a fully functional website using Node.js and a modern JavaScript framework (e.g., React, Vue.js). Brand Identity & Responsiveness: Design a clean, sleek website reflecting our brand's professionalism and responsiveness across all devices (desktop, tablet, mobile). Engaging User Experience: Integrate interactive elements to showcase project portfolios, client testimonials, and detailed service descriptions. Performance & SEO: Optimize website performance for faster loading times and implement SEO best practices for improved search engine ranking within the construction industry. Key Deliverables: Functional Node.js application with well-documented code. Responsive website design aligned with modern web standards and construction aesthetics. Integration of relevant APIs/services (e.g., project gallery management). Unit tests for critical website functionalities. Deployment instructions and launch support. Technical Skills: Expertise in Node.js and a modern JavaScript framework. Strong understanding of web development best practices (HTML5, CSS3, JavaScript). Responsive web design (RWD) for optimal viewing on all devices. Familiarity with Node.js package management (npm/yarn). Experience with version control systems (e.g., Git). Bonus Qualifications: Server-side templating engines (EJS, Pug) for dynamic content management. Content management system (CMS) implementation for easy updates. Contact form and lead capture functionality integration. Project Timeline & Budget: We have a flexible timeline and set budget for this project. Please include estimated timeline and project cost in your proposal. Communication & Selection: Clear and consistent communication is essential. We expect regular progress updates throughout the project. We will select the candidate with the most relevant experience and a competitive offer.
13 days ago22 proposalsRemoteINTERIOR AND EXTERIOR DESIGN
We are looking to add a part-time PAID Interior and exterior Design Intern who is passionate about developing a 3d residential rendering and modeling, and who loves working with people. Our focus is Residential 3d rendering and modeling, with an emphasis on Kitchens, Bathrooms, and whole home visualizations. Our ideal candidate would be a self-motivated, energetic, and passionate design intern. Candidates should possess strong problem-solving skills for creative solutions to design process, problems, and detailing for construction coordination. Responsibilities: · Prepare drawings for all of phases of chosen design using Chief Architect · Assist in presenting design concepts to owner · Demonstrate proficiency for design and technical detailing · Display fundamental knowledge of finish materials · Coordinate with consultants and vendors about various products, orders, delays, etc. Skills & Qualifications: · Experience in residential remodeling (kitchens, baths, additions, etc.) · Knowledge of 2020 Design and/or Chief Architect software for the production of presentation drawings, renderings, and contract documents · Proficiency in Microsoft Office Suite
2 days ago16 proposalsRemoteStrong Project Manager for Design and Build projects.
An accomplished Project Manager is sought to help design and construction projects in a rural environment. Candidates should possess experience managing all phases of minor development ventures from conception to completion. Duties will include liaising with architects, engineers, and trade contractors; developing detailed plans, schedules, and budgets; issue tracking and risk mitigation; ensuring compliance with applicable codes and regulations; and acting as the primary point of contact for clients. The ideal candidate will demonstrate superb organizational, communication, and problem-solving acumen along with the flexibility and resourcefulness necessary to navigate logistical challenges.
17 days ago17 proposalsRemote