Welding Inspector Projects
Looking for freelance Welding Inspector jobs and project work? PeoplePerHour has you covered.
Post an offer to educate them
Past "Welding-inspector" Projects
I need a CAD designer to translate concept drawings into GAs
Hi, I am after a CAD engineer that is competent in aluminum sheet metal design and welding. I can create concept drawings and these need to be translated into an assembly that is suited for manufacture. Units are welded and riveted so these must be considered. The assembly will be used for sending out to laser cutters for manufacture. There is plenty of work for the right candidate. I can provide examples of what is required initially aswell.
CAD drawing required for gate design
I have a gate which needs to be designed and have a CAD drawing to present to the client for approval. The gate will be constructed from steel box section and will have a welded on steel profiled decorative overlay. I have attached a drawing which provides and indication of what is required. The client requires the design to avoid any finger trap. I will require part drawings and a 3D model for approval
I need a 3D Hardsurface modeller to model a vaccum cleaner
Note: please share images of some of your more complex 3d model wireframes. I want to check topology skills before I give the job. I'm looking for someone to hard surface model a vacuum cleaner. Doesn't need to be totally exact as long as the end product looks like something similar to this. This is modelling ONLY. No need for renders. If you don't know how to do correct edge flow and quad topology then please do not apply. Please in Blender ideally (Other software is okay if I can see you also do good work, we could then work with .fbx's or similar) with a high quality quad based mesh. Simple principled shader materials (no maps) are fine for now, i'll edit the materials myself. Please make sure there are no holes or overlapping meshes or other errors. And if there is something like a wheel, the wheel in real life will not be welded onto the object so model it separately - I'm happy for it to be one object but just not joined by vertices, like a real wheel won't be part of the vacuum body, it will be free to spin. Hope that makes sense Lastly and very important. Try to keep the mesh as medium poly as possible, i'll then add a subdiv modifier on top for higher detail closeups. So please make it subdivision ready
UK Building regulations on 6 by 4 meter single storey extension
I need a UK building regulations for a single storey extension which is 6M by 4M. I will release the payment once the building inspector has said that the drawing is fine. I have attached the current file and it would need work to be done on the new extension only. I have attached the previous building regulations but it does not include the 6X4M which needs to be done. I will send the person who is doing this with the DWG file. Here is the google maps location https://www.google.com/maps/@51.5206578,-0.508137,3a,75y,27.68h,76.34t/data=!3m6!1e1!3m4!1sxSpth39o8-1Gjs84mVJaCw!2e0!7i16384!8i8192?entry=ttu
opportunity
Solidworks Drawing
We are looking for a reliable design engineer, to create 2D dimensioned drawings, along with creation of 3D step files from Solidworks native file. These will typically be structural members, from welded fabrications. 3D step files will need to be created of each individual member of the construction.
Carport blueprint
I'm looking for someone to create an blueprint for a carport for my property. The purpose is to provide shelter for vehicles, i already have the carport but the city inspector is requesting a engineered blueprint
2D sketch to 2D and 3D Technical drawing and STEP files
I need someone to convert my sketches (and photo of physical prototype) into CAD dxf files and also to create a 3D model and include STEP files for each individual component. I need one dxf file with all 3 components on and also show it assembled and include all dimensions. I can only upload 3 images at the moment for some reason?? If you can also offer a welding drawing as well that would be great. Matthew
Basic arduino project
I have a project I'd like to do but no idea how to do it. I have the code for arduino, components list and circuit diagram but no experience soldering or programming arduino. You can find the project by searching for Penny's computer book, inspector gadget. I can create the book etc and could eventually work it out, but I'd ideally like some help.
ZEUS Global Counter
I need a 1 page website to run (locally) on a stand alone browser at a trade show in 2024. It should display on a mac or PC using Chrome on a display tha is 1920x1080 resolution. The site features a number of counters that are all slowly ticking away every second, their displayed data relating to how much electricity a particular site has saved since a given date. For example, The top left site in the illustration attached is Yorkshire Cricket Club. Lets imagine that this club has been saving 6.9kWh - every hour - since October 23rd 2023. The running kWh specific to that club should be displayed in a format that mimics an electricity meter. Values for "money saved" and "CO2 saved" are then reported underneath this counter based on the following: Cost of 1 kWh = 30p KG of CO2 in 1 kWh = 0.265 Additional sites also have similar (independant) counters running. Eash of these sites will have their own start date and their own kW rating for the savings. Once all 8 sites (left of screen) are populated with data, the larger right hand window displays a running total of all 8 sites kWh, cost and CO2. kWh saved should be the sum of all 8 sites kWh. Cost should be the sum of all 8 sites cost etc etc. Please see sketch below for an approximate look / layout for the page. Note on setup: I have basic knowledge of how to use the right-click > inspect function in Google Chrome. Im hoping to have the ability to tweak the kW rate, start date, pence per kWh parameters etc through the Inspector of Chrome. Once done, I'll then exit the inspector and return to "show mode" where we demo the webpage to customers on the trade show booth.
Prepare Tender Document Pricing From Full Schedule & Drawings
I have a job to tender for and require QS services. Single storey wrap around extension. There are full specifications and drawings from the architect. Everything is to be priced including some basic landscaping after the build and party wall agreements etc. Single storey rear extension, outbuilding conversion into habitable space and internal re-modelling works 1.0 General Notes 01 - 05 2.0 Scope of work 05 - 25 SECTION 1.0 GENERAL NOTES • Drawings are not to be scaled and should be read in conjunction with all relevant design document • The contractor shall be responsible for all levels and dimensions and take requisite levels and dimensions from site and verify those shown upon the drawings, any discrepancy is to be brought to the attention of the Architect immediately • Contractor to check the existing site and determine the locationof any existing foundations, services, drains and trees etc. which may affect ‘construction costs’ before submitting tenders. • Dimensions marked * thus to be checked on site. • The contractor shall be responsible for serving upon the Local Authority any required Commencement Notices, on the District Surveyor the requisite Building Notice or on the Sanitary Authority (EHO) drainage work application and approval: and to comply with any other and all statutory obligations and regulations of the Local Authority. • Approval to be obtained before covering up any work relating to the Building Regulations from Building Inspectors. • Provide all necessary site security, scaffolding, access ladders, material hoists, temporary protection and working platforms etc which are to be erected, maintained, certificated, dismantled and removed by suitably qualified and insured specialists. • All plumbing, drainage, heating, electrical services etc including re-siting of heating appliances/boilers/flues etc to be altered/modified/adjusted as necessary by suitably qualified & experience specialists or registered competent persons, tested & appropriate certification issued where required in this specification. • Any asbestos/contaminated soil is to be inspected by a specialist, removed, and disposed off site by a specialist licensed contractor as required under the Control of Asbestos Regulations 2006 . • Ground to be prepared for new works as described including location and alteration/modifications to all existing services as necessary, including sealing up, capping off, disconnecting, removing redundant services as necessary. • External paths, drives, patios, walls, fences & gardens etc, to be taken up and
Plans for a 15' x 33' garage & 12' x 33' lean-to carport
Hi Nur Hatice Kübra, I am looking to have a single car garage (15' wide x 33' deep) with a single car port lean-to (12' wide x 33' deep) attached. I'd like to have the drawing created in a CAD type format. 1.) Please see idea sketch below (concept look only – this sketch is for a totally different size & type of garage) 2.) Overall dimensions (garage & carport) are 27' wide x 33' deep 3.) Dimensions - garage 15' x 33', + lean-to car port 12' x 33' 4.) Roof slope on garage is ~ 5/12 (not like sketch below) 5.) Roof slope on lean-to is ~ 3/12 6.) Garage door is on front (15' dimension side of garage) & is 10' x 8' tall 7.) Left side has 3 windows at 2'-4" x 4'6" - equally spaced along the 33' wall dimension 8.) Wall height of garage is 9' 9.) Wall height of lean-to can be less if it makes the roof slope (3/12) work better 10.) Man door to garage will be on right side & be 3' x 6'-8" & start 20' down from the front (not like sketch) 11.) 6" x 6" pressure treated columns for lean-to roof support 12.) Cedar shingles for siding 13.) 12" cornice overhang (not sure if that is different than what is shown) 14.) Structure will be on a slab foundation (footings, walls, slab) a.) Footings will be continuous at garage perimeter (15’ x 33’) & be 2’ wide x 10” deep with 2-#4 rebar b.) Perimeter block walls off of the footing will be 8” wide & be 40” tall (5 courses of 8” block) c.) Top block will be type to accept a 4” slab d.) Slab will be 4” with light welded wire fabric reinforcing Please let me know; 1.) Time needed for modification (work days) 2.) Cost to generate plans Thanks Jay Scott Cell 404 935 1909
10 x Images / Symbols for use in Presentations
Design details: I would like some icons designing to use in Presentations. I'll give all categories when I think of them but it will be things such as : Sales Finance Production Health etc. Example attached - must be "see through" - not sure on the official terminology (sorry) - PNG Main Colour will be Blue, I'll provide exact RGB later. Thanks, Chris Updated: Blue = RGB is 0.90.156 the attached from the green (my previous company) to the blue plus a white version of each for any new ones.. Then these extra ones: Quality (a tick) Engineering / Design (like a pencil and paper) Welding (I;ll send 4 more that require RGB is 0.90.156 These from the green (my previous company) to the blue Then these extra ones: Quality (a tick) Engineering / Design (like a pencil and paper) Welding Headlight Icon: Dipped Light Headlight Full Beam change) Headlight Icon: Dipped Light Headlight Full Beam
Optimizing a gasifier
I am building a small scale gasifier and I want some amendments to the initial plan. I attach a short video. It was made in solidworks. I made a draft in tinkercad as it's easy for me to use and be able to demonstrate what I need. It is fabricated with threaded metal pipe fittings and no weld at all. There are also few stove pipe parts. The maximum space for construction is 1 mtrs long x 0.5 mtr wide x 1 mtr height I attach 2 video links of previous projects that I built but very basic constructions. https://www.youtube.com/shorts/z8NJ9JXX1Dc https://www.youtube.com/shorts/emNjlEmW9V4 So what is a gasifier? It's an incomplete combustion of biomass (wood, pellet, etc) that under high temperature and restricted oxygen, produces a flammable gas (syngas) that will be used to operate an internal combustion engine and particularly a generator. Please let me know if you are interested in this project and If you have a budget in mind. ( I would like unlimited revisions, until I am satisfied with the design) Time frame for completion is one week. Thank you
Square space website design
Hi all, We are a welding and fabrication start up called FLOE FAB. We would like a website designed on squarespace please.
FLOE FAB Logo design
Hi all, We are a welding and fabrication startup called FlOE FAB, we would like a new logo designed please. We look forward to hearing from you.
I need a paralegal or lawyer with consumer background (UK Only)
Hi, I recently purchased a horsebox lorry 7.5ton from a private seller.. it has MOT since April this year.. 1 day after collection I noticed problems with water ingress and asked a horsebox specialist to look at a repair.. while checking he checked underneath the vehicle and found a sub standard weld had been done to the chassis at the main load bearing axle. He also found the bracket holding the fuel tank to be hanging loose, broken/corroded. he deemed the vehicle unsafe and shouldnt be driven and never should had passed an MOT. what are my legal rights here and how do I progress with both the seller and VOSA/DVSA (If required for MOT that should never been passed)? setting a low budget until I know my rights.
opportunitypre-fundedurgent
New Corporate Website
Currently the organisation has 5 websites and the information contained therein needs to be redeployed into a modern website, without losing the essence of the company history, ensuring its capabilities are clearly shown, make it easier to navigate and to focus on its manufacturing excellence and its resistance welding technology for robotic applications as well as specialised machines. The current websites are http://milcomfg.com http://welform.com. http://milcointl.com. http://www.welform.cn. http://www.tewi.it I work as a Business Development Consultant for the company. In September this year the company for the first time exhibits in Germany at Schweissen und Schneiden, this is the worlds largest joining and cutting exhibition. https://www.schweissen-schneiden.com/joining-cutting-surfacing/ I have powerpoint presentations that would allow certain information to be included in the website if helpful. I have a website address registered at Weebly which is www.milco-weld.com
Content writing for Web pages
This is for a community site we're give food away and slso sell products to raise funds and welding side to site
A metal sundial 5m tall
I am designing a sundial but can't draw. It will consist of a metal frame with welded laser-cut steel sheets. I need someone who can do a few simple sketches and maybe a basic 3d model. Once i am happy with that I will then need good 2d drawings of each sheet that i can send to be cut. The frame is box steel. I have more detailed pictures of the panels (i can only post 3 here) The panels will get slowly smaller as they go up the sundial. I need someone who is good with designing in 3d and making stencils from graphics.
Agent based simulation using Netlogo
A car production factory is planned to be completely automated and serviced by robot agents. Metal sheets are delivered to the factory at regular intervals. Carrier robots then collect a sheet from the metal store and deliver it to sheet metal cutter agents who press the required shapes out of the sheet metal. The cut sheets are then taken to the welder agents, by the carrier robot agents, who weld the panels together to form a skeleton car body. The carrier agents then take the car bodies to the riveter agents, who finish the skeleton car bodies. The car bodies are then taken, by the carriers, to a storage area and from there loaded onto vans and taken to another facility for further processing. The cutters, welders and riveters are stationary and are maintained with power through a continuous fixed connection. Robots, which transport the sheets or car bodies use 1 unit of energy when travelling unladen and 2 units when transporting anything per simulation cycle. When their energy level becomes low robots must return to a robot room to recharge. They recharge at a rate of 5 units per simulation cycle. There are two quality levels of car body ‘Prestige’ and ‘Standard’. Each order may be either ‘Prestige’ or ‘Standard’. Both welders can produce ‘standard’ car bodies but only a specialised welder can produce the ‘Prestige’ version. The specialist welders take 7 simulation cycles to weld a car body together, whilst the other welder s takes 4 cycles.