Technical Drawing Projects

opportunity

Technical drawing

I require a detailed technical drawing for a bolted steel-framed circular structure 22 meters in diameter. Deliverables: dimensioned plans, elevations and sections showing bolted connections, steel frame layout, foundation interface, pitched roof design with rafters, purlins, guttering and downpipes, and basic material/section specifications. Drawing must be clear for fabrication and assembly, suitable for production and installation. Precision, clarity and constructability are essential. A 3d model will be required with various views needed for illustration purposes.

Technical Project Manager

Location: Montreal, Canada (Local candidates only) Engagement Type: On-Demand Contract (No fixed duration) Roles & Responsibilities Provide pre-sales support by participating in client meetings and requirement discussions. Understand client business needs and translate them into high-level project requirements. Guide the sales team with solutioning and help drive successful deal closures. Act as a bridge between the client and delivery teams to ensure clear communication and alignment. Support Project Managers and delivery teams with project planning, timelines, status tracking, and risk identification. Help the team understand client expectations, priorities, and business mindset. Participate in onsite client meetings across Montreal (and occasionally the US/Canada) as required. Provide project coordination and stakeholder management throughout the engagement. Required Skills & Experience Fluent in French and English (mandatory). Based in Montreal and willing to travel to client locations on short notice. Prior experience as a Business Analyst, Project Manager, Program Manager, Product Manager, or similar customer-facing role. Strong requirement gathering, stakeholder management, and communication skills. Good understanding of software development projects and project lifecycle. Ability to work independently on an on-demand basis. Engagement Details On-demand contractor role with no fixed contract duration. Candidates should be available to support projects whenever engagement is required. Travel to client locations is expected as part of the engagement

UK Architectural Technologist for AutoCAD

Summary Looking for a UK-based Architectural Technologist or technical CAD designer for ad hoc AutoCAD drawing work on a commercial project. This is a small but ongoing requirement for a reliable freelancer. The ideal candidate will have experience in architectural design and drafting, with proficiency in Autodesk AutoCAD. Responsibilities include creating and editing AutoCAD drawings, ensuring accuracy and adherence to project specifications. This is 2 days work required by end Friday 24th July

2D/3D Design for Pet Products, My ideas and delivering 2D / 3D

I am looking for an experienced designer ideally with knowledge of pet product design to turn my ideas into 2D wireframe and 3D mock ups ready for production. Products include dog lead, dog collar and dog harness. The 2D wire frame should be a technical drawing showing measurements, dimensions and technical things like fabric choice and materials. Like a schematic / wireframe so a factory can look at it and know what to do. I will provide reference images, as well as a written brief and some AI generated images which convey the product. You don't need experience in pet products, but more of an understanding of how things are made and how to put that across in a design. I will need to see some examples of your work, 2D and 3D. And screen grabs of your workflow to make sure you are not just using AI. Please reply message me with a PDF or link to your portfolio on a respected website (either on this website or whatever). I am not looking for a NASA style schematic or design, can be simple, but needs to be clear what it is and the vision. I have attached some examples of what we need. I look forward to hearing back.

WooCommerce Virtual Assistant - Competition/Lottery

I run a successful, fast-growing UK cash competition website built on WordPress and Woo Commerce. I am looking for a reliable, technical Virtual Assistant to handle the backend admin tasks twice a week so I can focus on marketing and running live draws. Log into WordPress and create/duplicate WooCommerce Lottery products for our weekly draws. • Configure ticket number limits, draw countdown timers, and pricing tiers.

opportunity

Measured survey and existing drawings

Hello, I’m looking for an architect or draft person to carry out a measured survey of a house and provide existing floor plans, elevations and one section in DWG and pdf format. The property is a detached property approximately 150 sq m. The property is in Birmingham, UK and you will need to visit the property to arrange this.

CAD Drawing Needed for Simple CNC Wooden Product

I'm looking for an experienced CAD designer to create a simple 3D CAD model for a premium wooden prototype that will be CNC machined from solid hardwood. The design is straightforward and consists of a rounded rectangular base with an internal routed cavity. It has been designed specifically for 3-axis CNC machining. I will provide: Reference drawings with dimensions Rendered images of the design Overall measurements and construction details The CAD model should be suitable for CNC machining and supplied as: STEP (.step/.stp) Native CAD file (Fusion 360, SolidWorks, Inventor or similar) PDF drawing with dimensions The designer should have experience producing CAD models for CNC machining of timber products.

opportunity

Stage 4 Technical Plans

Hello, We require Stage 4 technical plans to submit to Building Control. Please find the current drawings attached for your review. Separately, we may also be interested in commissioning an overall site layout/masterplan for the property. This would show how the various areas are intended to be used, including elements such as the driveway, parking, orchard, vegetable growing areas, seating spaces, grazing land, and any other future landscaping or land-use proposals. This is primarily for our own long-term planning purposes and is not essential to the erection or installation of the barn itself. Finally, if you work closely with any Building Control specialists or approved inspectors, we have not yet appointed anyone and would be happy to receive recommendations and quotations for this aspect of the project as well. If possible, could you also provide a fee proposal/quotation for the Stage 4 plans and any additional services outlined above? I look forward to hearing from you and discussing the next steps. Best, Dan

Side Extension on HMO

Hi, I need someone who can take some existing drawings and add a side extension. In this extension will be a HMO room with en suite. If the designer also has building control experience and can do those drawings then great im happy to do this with them also. Marked with black line on attached pics. I have the DWG files and revit files.

Writer required to Humanise and Rewrite 8,000-Word EMS Audit.

Project Description I am looking for an experienced writer/editor to rewrite an existing document of approximately 8,000 words. The objective is not simply proofreading or minor editing. I need the content to be rewritten in a natural, professional, human style while preserving the original meaning, technical accuracy, structure, and key messages. The current text is being identified as predominantly AI-generated. The goal is to transform it into content that reads as if it has been written by an experienced subject matter expert, with a target of achieving a significantly higher level of human-authored writing characteristics. Document Topic Environmental Management Sustainability and Environmental Processes ISO 14001-related content Knowledge of ISO 14001 and environmental management systems would be advantageous, but it is not essential if you have strong experience rewriting technical or business documents. Scope of Work Rewrite approximately 8,000 words Retain all technical meaning and intent Improve readability, flow, tone, and natural language Remove repetitive or generic AI-style phrasing Ensure content reads as professionally written by a human expert Maintain a consistent writing style throughout the document Deliver in Microsoft Word with tracked changes preferred Ideal Freelancer Proven experience in technical writing, editing, or content rewriting Strong command of written English Experience with compliance, management systems, quality, environmental, engineering, or manufacturing topics would be beneficial Ability to handle technical terminology accurately Experience humanising AI-generated content is highly desirable When Applying Please Include Relevant experience with technical/business writing- Audit Reports. Any experience with ISO standards (ISO 14001, ISO 9001, ISO 45001, etc.). An estimated turnaround time. Examples of similar projects completed. Selection Criteria Please only apply if you can genuinely improve the writing style while maintaining technical accuracy and professional credibility. The successful freelancer will be considered for future document review and technical writing projects.

LOST SEO!!

The site need fixes clean up the technical and on-page issues that hold a site back, like broken pages, slow loads, weak titles, indexing problems and thin content. I know that improves overall site health and will win back some of the smaller rankings fairly quickly. We need to find more products like "garden drinks cooler" and "drinks cooler table" sitting near the top of page one we can push up. The site had a big drop around September 2025, and lost page one rankings for a lot of high value terms all at once, like patio heaters, cantilever parasols and pizza ovens, this can be recovered. That kind of sudden, sitewide loss usually points to one root cause, such as a technical change, an indexing issue or an algorithm hit, rather than lots of small problems. So the fixes are the right foundation and will show early movement, but the bigger prize is finding what triggered the September drop and recovering those rankings. That's where the real traffic is, and it's what I'd want to focus on.

opportunity

2D CAD drawing required for event space

Experienced 2D CAD designer required to produce an accurate event floorplan for Paris Expo Porte de Versailles, Hall 1. You will receive venue details and supplied assets, then refine the layout through two to three phone calls with the client and continue liaising directly until completion. Must be UK‑based with demonstrable experience in event CAD plans, understanding of circulation, safety clearances, and fixture placement. Deliverables: scalable 2D CAD drawing, revisions as needed, and final file in DWG/PDF formats.

Wordpress Website Health Check (Tutor LMS & Member Press)

WordPress Website Health Check + Backup Setup (TutorLMS & MemberPress) Project Description: EdNest is an educational platform preparing for launch, and we’re looking for a reliable WordPress specialist to carry out a full technical health check and set up a secure backup system. The goal is to ensure the site is stable, optimised, and fully protected before going live. What We Need: A thorough review of the entire website structure, including WordPress, TutorLMS, MemberPress, plugins, hosting setup, and performance. You will identify issues, optimise the site, and implement a professional automated backup solution. Tasks Include: • Full technical audit of the WordPress site • Review TutorLMS course structure and plugin stability • Check MemberPress configuration and subscription logic • Identify errors, conflicts, or performance issues • Improve speed, caching, and security • Set up automated daily backups + off‑site storage • Provide a clear report of findings • Implement approved fixes safely Requirements: • Strong experience with WordPress technical audits • Knowledge of TutorLMS and MemberPress • Experience setting up secure backup systems (UpdraftPlus, JetBackup, hosting‑level backups) • Understanding of plugin conflicts and optimisation • Careful, trustworthy, and clear communication Nice to Have: • Security hardening • Staging environment setup • Hosting configuration experience • Background in educational platforms About EdNest: EdNest is a structured learning platform for families, tutors, and schools. We are in the final stages of launch and want to ensure the site is stable, secure, and ready.

opportunity

UK Building Regulation for conversion from single to two flats

Experienced UK Architectural Technician required to produce a comprehensive Building Regulations drawing package for conversion of a single dwelling into two self-contained flats. Using provided approved planning DWG files, prepare detailed drawings for Building Control approval including wall, floor and roof build-ups, sections and construction details, fire protection (Part B), sound insulation (Part E), thermal insulation and U‑values (Part L), ventilation (Part F), drainage (Part H), stair and guarding details (Part K), accessibility (Part M), specifications and notes. Must demonstrate proven UK Building Regulations experience, strong knowledge of Approved Documents, AutoCAD proficiency and capability to incorporate structural engineer information. Provide examples of similar projects, estimated fee and expected turnaround. Some items will be retrospective; site visits and updates will be coordinated. This assignment may lead to ongoing work for residential conversions. Please do not apply if you do not know how to do building regulations drawings. Please attached example of work for Building regulations for similar conversion from single to two flats in UK. Regards, Nisreen

Improve Website Speed and User Experience

We are looking for a frontend developer to analyze and improve the performance of an existing website. The main goal is to optimize loading speed, improve user experience, and ensure the website performs well across different devices. Scope of work: Website performance audit Frontend optimization Image and asset optimization Improving loading times Mobile responsiveness improvements Code cleanup Core Web Vitals improvements Basic SEO technical improvements Preferred skills: React / Next.js / JavaScript HTML/CSS Performance optimization Lighthouse / Core Web Vitals experience Deliverables: Optimized website Performance improvement report List of implemented changes

opportunity

Full Stack Engineer (C1/Native English Required)

We seek a seasoned Full Stack Engineer to represent our development team in client interviews and meetings. You will facilitate clear technical communication, coordinate hiring discussions, assist with project logistics, and join follow-up sessions. Required: proficiency in Python, C#, Node.js, React, Next.js, AWS and Docker, exceptional spoken English (C1/native), polished professional communication, reliability, organization, and comfort on video calls. Prior experience liaising between technical teams and clients is preferred.

opportunity

Virtual Technical Assistant (Wix, Sqaurespace , Shopify Expert)

Type: Part-Time / Ongoing Freelance Location: Remote (Global – open to any location) Language Requirement: Native or professional-level fluent English Are you a platform wizard who loves the technical puzzle of building and integrating websites, but would happily never choose a color palette again? If so, let’s talk. I am a freelancer looking for a reliable, tech-savvy Virtual Technical Assistant to take the heavy lifting out of backend development, platform setups, and app integrations. No Design/UI Work: You will not be responsible for layouts, aesthetics, or branding. I will provide the designs, assets, and wireframes. Your job is to make them work. Key Responsibilities: Platform Setup & Customization: Build and configure websites from scratch or templates using Wix, Squarespace, and Shopify based on provided mockups. Coding & Development: Implement custom tweaks, fix bugs, and inject custom code (HTML, CSS, JavaScript/Liquid/Velo) when native platform features fall short. App & API Integration: Connect third-party apps, plugins, payment gateways, and tools (e.g., Zapier, CRM integrations, marketing automation). Technical Troubleshooting: Diagnose and fix broken links, responsive layout issues, or integration errors. Candidate Requirements: Platform Expertise: Proven experience under the hood of Shopify, Wix, and Squarespace. You know their limitations and how to work around them. Coding Skills: Strong foundational knowledge of HTML, CSS, and JavaScript. Experience with Shopify’s Liquid or Wix’s Velo is a massive plus. Problem Solver: A "get-it-done" attitude. If an integration is tricky, you enjoy troubleshooting until it works seamlessly. Reliable & Organised: Ability to manage your own hours, hit deadlines, and provide clear updates on tasks. I have three projects I currently need assistance with, but if we work well together I would be looking to continue on an ongoing basis as and when the projects come in. How to Apply: Please send over a brief introduction, your current hourly rate, and 2–3 examples of websites you’ve worked on (specifically highlighting any custom coding or complex integrations you handled). Please do not contact me via my website or LinkedIn PPH only. STRICTLY NO AI

AI-Powered Women Wellness App

Hi, Thank you for submitting your proposal for the Women Wellness App project. I am highly impressed by your profile and experience. We are currently reviewing all candidates and technical approaches. As part of our open and collaborative process, we have published the project's vision, planned architecture, and core features on GitHub. To help us move forward with your application, please take a moment to: Review our official repository: https://github.com/carecure26/Women-Wellness-app Leave a Star (⭐) on the repository. Drop a comment in our "Discussions" tab introducing yourself and sharing your initial technical thoughts on our AI features or tech stack: https://github.com/carecure26/Women-Wellness-app/discussions/1 This will help us better evaluate how we can work together. Looking forward to your input! Best regards, Eng. Afaf Ali

STRUCTURAL STEEL BEAM CALCULATION OPENING FOR BIFOLD DOORS

I NEED A STRUCTURAL ENGINEER TO PROVIDE SIZES OF STEEL, PADSTONE AND CALCULATIONS FOR BUILDING CONTROL ON A SMALL HOUSE PROJECT. I WILL PROVIDE DRAWINGS. WE ARE JUST OPENING UP AN EXISTIGN OPENING AT THE BACK OF THE HOUSE BY ANOTHER 3-500MM. need it asap

Publication-ready edit for HR white paper

Revise a 13,000-word white paper to read naturally and authoritatively. Transform AI‑crafted prose into a human, publishable voice while preserving technical accuracy and original insights. Improve flow, clarity, tone, and coherence; enhance vocabulary and sentence variety; eliminate repetition and awkward phrasing; and ensure consistent style befitting a professional white paper on a new HR operating model. Deliver an edited manuscript ready for publication.