Network Engineer Projects
Looking for freelance Network Engineer jobs and project work? PeoplePerHour has you covered.
Network Engineer
We are currently looking for a Network Engineer (freelancer) who can provide us onsite support to our client for a one-day activity. We appreciate it if you could support us and let us know if we can proceed further
3 days ago3 proposalsRemoteopportunity
Structural Engineer
I am looking for a structural engineer to help with several UK building regulation sites. We need an engineer to provide all the structural calculation reports and detailed drawings in order to pass UK building control. 9 existing sites that need addressing asap with the opportunity for further work on an ongoing basis.
3 days ago16 proposalsRemoteopportunity
Structural Engineer needed for workshop project
I'm looking for a structural engineer (certified with PI insurance) who can complete calculations for 3 retaining walls & a foundation which will make up a garden workshop. The images attached to the listing show the space, and existing masonry. I can share sketches I have made with provisional details of the foundations, retaining / decking supporting walls and outline dimensions in respect of our proposed garden workshop / shed. At this stage my concern is whether the proposed foundations for the retaining walls and workshop (all to be constructed using concrete blocks) are suitable from a structural point of view. I'm looking for the following outputs which I can subsequently send to my local council for them to review in order to approve the works; - Design the specification for the 3 retaining walls, and concrete slab which the workshop will sit on (also considering the loading of decking over the top) - Produce structural calcs to prove the stated design will be adequate & safe. - Produce drawings to clearly communicate the construction. Some further thoughts: The top of the existing rear retaining wall is 2250mm above its foundation but could need to be raised slightly to accommodate the required drainage fall on the workshop roof. Although the tallest of the earth banks needing to be ‘retained’ is 1900mm, the proposed new side retaining walls would need to be a little higher than this to act as supports for the possibility of a deck to be constructed over the workshop. I believe that the construction of a garden workshop measuring 5m long by 3m wide and being less than 2.5m high would be allowed under ‘permitted development’ and so not be subject to either planning or building control regulations. However, we are unsure whether these or other regulations may apply in respect of the proposed retaining walls which would also possibly be used to support a deck to be constructed over the workshop. I think it would be best if we simply leave the existing rear retaining wall in place (ie without disturbing it since it has been in place since the late 1980’s) and construct a new rear retaining wall immediately in front of it. That way the existing rear retaining wall would become part of the ‘retained ground’ immediately behind a new rear retaining wall. A suitable gap between the old and new rear retaining walls could then enable appropriate drainage to be incorporated into the design & construction of the new retaining wall before being back-filled. In respect of the possible future loading which would be imposed on the two side retaining walls by the installation of decking, I think that since these loads would essentially be purely composed of the dead weight of the decking structure they would in fact be beneficially adding to the overall weight of the side retaining walls. This is on the assumption that the side retaining walls are designed as being simple gravity retaining walls. In summary, I think I need to construct two new side retaining walls (such that they could also support a decking structure spanning across them) and a new rear retaining wall in front of the existing one. Actually, as can be seen from the drawing and photo of the south retaining wall, this structure would not really be retaining much ground behind it at all in comparison to the north retaining wall and so could essentially perhaps be designed as a supporting wall to carry the load from the decking structure. Lastly: Please could you provide proof of your certification/qualification, and current valid PI insurance with your proposal.
8 days ago13 proposalsRemoteopportunity
Structural calculations
looking for a structural engineer who can produce details for building control. it is for a single storey extension, 5mt sliding doors to be installed in the property. we have architects drawings of the layout of the new extension.
2 days ago10 proposalsRemoteMachine Learning Engineer
We are seeking a highly skilled and motivated Machine Learning Engineer to join our team and contribute to the development of cutting-edge solutions for child safety applications. As a Machine Learning Engineer, you will be responsible for: ● Training and enhancing machine learning models using image-based data on TensorFlow. ● Evaluating and enhancing the performance of existing ML models, identifying opportunities for targeted advancements. ● Advising and guiding on the full ML development lifecycle, from conception to deployment, ensuring robust, efficient, and scalable solutions. ● Developing strategies for continual model training and retraining to adapt to evolving data patterns and threats, including training models in remote and sensitive environments. ● Innovating and exploring new ML development pathways, including the integration of open-source multi-modal models for advanced image and video classification tasks. ● Customising and fine-tuning state-of-the-art ML models to align with company-specific use cases and client needs. ● Architecting and implementing solutions for on-device model deployment, emphasising user privacy and data security. ● Creating and maintaining model deployment packages, such as SDKs and Docker containers, for seamless client integration. ● Collaborating cross-functionally with product managers, software engineers, and other stakeholders to integrate ML solutions into our product suite. ● Staying abreast of the latest ML technologies and methodologies, advocating for the adoption of industry-best practices. Qualifications: ● Bachelor's or Master's degree in Computer Science, Engineering, or related field. ● Proven experience in machine learning model development and deployment, particularly with TensorFlow. ● Strong programming skills in Python and proficiency in ML libraries such as TensorFlow, PyTorch, or Keras. ● Experience with image-based data and advanced image processing techniques. ● Knowledge of model evaluation metrics, optimization algorithms, and deep learning architectures. ● Familiarity with cloud platforms for model deployment (e.g., AWS, Google Cloud). ● Ability to work independently and collaboratively in a fast-paced environment. ● Excellent communication skills and the ability to explain complex concepts to non-technical stakeholders. Bonus Skills: ● Experience with on-device model deployment and edge computing. ● Familiarity with privacy-preserving ML techniques and data security protocols. ● Knowledge of open-source ML models and their integration into custom applications. If you are passionate about leveraging machine learning for child safety applications and are excited to work on impactful projects, we encourage you to apply and be part of our innovative team!
23 days ago18 proposalsRemoteI need expert reverse engineer.
Hello. I have simple .exe file that generating license code. My deadline is 1 day.
23 days ago7 proposalsRemoteLooking for a quality engineer for ISO audit support
Looking for someone with a quality background in a manufacturing environment to support with ISO9001 internal audits and NCR administration.
a month ago14 proposalsRemoteResearch Local providers
We are looking for someone experienced in communicating via email to Local providers around the world. He also has the ability to schedule appointments and talk to suppliers in a tactful and attractive manner - Freelancer or not working. - 100% English language, Fluent. - Yes, we prefer that he have more than one language as well - Experience in research - He has experience with SEO and searching by country. - Tact in speaking and the ability to persuade. - We prefer to specialize in IT, networks, or communications.
5 days ago15 proposalsRemoteAutoCAD Technician required (Birmingham) - short contract
I'm looking for an AutoCAD technician to help support the logistics team for a major construction site in the Curzon Street area of Birmingham. The contract will likely be for 2-3 months, but could well continue. The candidate will need to provide their own Laptop / Computer and CAD software and will be working from within the site offices alongside the 4D (Synchro) Engineer and logistical team to produce site plans, timeslices etc. Ideally 5 days per week working form site office. But, there may be an option for hybrid working (4 days in office, 1 remote etc). Please respond with your CV, experience and availability. Many thanks
3 days ago1 proposalOn-site in Birmingham, GBopportunity
User portal
We sell a device which uploads data via cell network. We want to develop a user portal that provides access to the data. Preferably the database would be SQL Server on an AWS platform in USA. We have users that require data security. Phase 1 is replicating an existing platform. This is a new project, we do not wish to reuse existing code. Phase 2 is a series of functionality improvements. Phase 3 is providing insight/AI across the data. The data will be viewed via a web portal. We may consider an app at a later date.
3 days ago57 proposalsRemoteBusiness Membership Sales
Telesales Requirement Overview. FinidItInCW is a comprehensive business platform and directory, providing local businesses with a wide array of opportunities and resources. Users can: a) Access local and national business tender opportunities. b) Connect and advertise to a network of up to 80,000 businesses within the region, tailored to their membership level. c) Obtain a variety of business services at discounted rates. d) Access an extensive range of business information services. e) Attend network events with like-minded businesses, fostering valuable connections and collaborations. In essence, FinidItInCW serves as a one-stop destination for businesses seeking growth, networking, and essential resources within the local and national business landscapes. Requirement We are looking for a telesales person to canvass our database of users to sell them our membership services. Ideally that person will have experience in selling similar kinds of services in the B2B market place. Membership prices range from £120.00 - £300.00pa (monthly payment structures also available as below). Commission Structure and Targets. Initially we would be looking to pay a fixed weekly/monthly fee plus ongoing commission payments, there is an opportunity for long term contracts if successful. We would be looking to achieve a good rate of conversion per call. Membership Prices £12.00 per month for Premium or £120.00 Annually £17.00 per month for Premium Plus or £300.00 Annually Previous Experience of B2B telesales or membership sales would certainly be a benefit (please mention on any proposals forwarded. Position would probably suit individual rather than agency.
8 days ago7 proposalsRemoteopportunitypre-funded
Intelligent search on documents in my cloud
My name is Salvatore, I am an Electronics Engineer and I am looking for an artificial intelligence programmer expert in LLM to work with one of my computer engineer collaborators. I don't need online lessons. I need to use LLM APIs that could be LangChain or whatever to train on a folder of files and be able to query them and most likely use something from the open source AI Bloom on my project. I inserted my docx and pdf documents into the cloud. On the site I created a search bar that I use to write what I want to search for in my documents (in italian language). The query/search occurs on all documents and not on one at a time. I want to improve the search in the sense that if I don't write exactly the sentence contained in one of the documents, the database needs to be made intelligent and understand what topic I'm looking for in my documents.
23 days ago19 proposalsRemoteSAP Process Engineer for Logistics area at TKE - Spain
Keil Business Solutions GmbH is an innovative Google reseller and IT service provider. For a customer project we are currently looking for a Senior SAP Process Engineer/Business consultant for Logistics area at TKE (f/m/d) - Spain Tasks: • Customer business consulting role • Develop process concepts and define detailed processes. • Work together with business functions to define requirements and align process concepts. • Drive process automation. • Align process concepts with SAP/IT team. • Work closely with SAP/IT colleagues to steer implementation. • Act as bridge between business functions and IT/SAP. • Monitor process execution during ramp-up/until stable and control process stability. • Detail process definition of logistics (incl. product planning, warehouse management, material management, etc.) • Definition, rollout and troubleshooting of processes w/ operational colleagues. Skills: • Deep SAP Logistics knowledge and experience in area of business consulting and process engineering • Customer oriented • Very strong process-thinking skills • Proficient/fluent English and Spanish skills • Pragmatic and solution-oriented way of working • Ability to work independently and in a structured way • Ideally some TKE experience and knowledge of best practices / state-of-the-art processes Start: ASAP End: 31.12.2024 + extension (at least until 31.12.2025) Utilization: 100% Location: remote and 50-60% on-site in Mostoles (next to Madrid, Spain) Project languages: Spanish and English If you are interested, please send us your profile (ideally in Word format).
a month ago10 proposalsRemoteGaming sites for Guest Post - Gaming sites for backlinks
I am seeking an expert guest poster and link builder to secure high-quality, contextual backlinks from their extensive network of gaming and technology websites. As an experienced off-page SEO professional with nearly a decade of experience in guest posting and outreach services, I have access to their database of over one thousand websites focused on gaming, tech and related topics. I will help grow backlinks from domains with strong authority and traffic in the specified niche areas. I am focusing on websites with substantial, niche-relevant audiences where guest posts and links have the best potential to provide value to readers while also boosting search rankings and referral traffic over time.
2 days ago9 proposalsRemoteUK B2B EMAIL DATA
We are looking for IT Managers within UK companies with the below fields Contact Name Job Title - Network Manager / IT Manager / IT Director Company Name Company Sector - This is essential (Financial / Manufacturing / Warehouse / Travel & Tourism / Retail / Hospitality etc). Email Address (NAMED EMAIL ADDRESS - NO PERSONAL GMAIL / YAHOO ETC) Phone Number (if available not essential) Please provide a count of available data. Thanks, Jake
16 days ago64 proposalsRemoteopportunity
Microsoft 365 - Expiring SharePoint links for specific people
We're looking for a Microsoft 365 /SharePoint engineer who can assigt with a workflow that does the following: Internal SharePoint user shares a files to a specific external recipient. External recipients access to file is only valid for 14 days. The conditions are: The external recipients are not guests. The workflow can be applied on a Site level This is similar to the expiration of Anyone links but we want to apply to specific external recipients.
23 days ago13 proposalsRemoteWhite Paper - Industrial IoT - Cellular Analysing
Hi, Seeking a CREDIBLE technical author who understands cellular IoT in an industrial capacity, The topic will be based on why analysing cellular networks are important to compliment a product that I manufacture. I do not want AI generated content. The Whitepaper will be aimed at UK audiences and I am based in the UK so the whitepaper will need to have correct British spellings and terminologies. I have attached a sample from an manufacturer in which I wish it to have the same factual information but relevant to my proposed topic. Thanks
16 days ago17 proposalsRemoteBaby Pasifyer design
We are seeking a talented design engineer to create captivating baby pacifiers. Our goal is to develop innovative and unique designs that set our products apart from existing market offerings. We encourage you to explore various concepts and styles to deliver a product that is both functional and visually appealing to parents. To get started, we have provided some examples of the types of pacifiers we are interested in. These examples should serve as a guide for your creativity. However, we encourage you to think outside the box and propose new designs that incorporate your unique perspective. The design should be distinctive and differentiate our products from competitors. It should also be practical, ensuring that the pacifier is safe for babies and easy to use. We value creativity, attention to detail, and the ability to work within tight deadlines. If you have a passion for designing products that make a positive impact on children's lives, we would love to hear from you. Please submit your sketches and full three-dimensional designs, along with your portfolio, for consideration. We look forward to collaborating with you to create a baby pacifier that will be loved by parents worldwide.
7 days ago16 proposalsRemoteBid Writer/Fundraiser
We are a youth charity looking for a Bid Writer/Fundraiser based in the U.K. Key skills * Business Development - Support bids and proposals * Reporting - compile and write financial and project reports for funders, board and partners * Desirable - strategic project management skills, experience with indigenous cultures, medicines, agro economics and natural healing Criteria * Must have experience of working in charitable sector small - medium organisation preferably in the UK * Understanding of charitable sector culture and working especially community/grassroots, youth, international project working - desirable * Work flexibly * Quick start and turnaround times Apply by writing a statement of how you would approach work with us to ensure income generation for network based organisation i.e. multiple organisations, consortia and collaborative bids, projects through bids and why they are suitable for the page - no longer than 2 sides of A4 - must include proposals for cost.
2 days ago12 proposalsRemoteopportunity
Support new business to reach students and graduates in the UK
I have recently launched a small UK-based business providing CV, cover letter, and interview preparation services to students and graduates (higher education). I am hoping to work with a freelancer who has marketing experience with this specific audience, a well established network in this field, or both! My primary objectives are to explore strategies for making my company website and Instagram page more visible to this specific audience, and to secure more customers. If you are familiar with this type of customer and have ideas, please get in touch and we will agree a proposal accordingly.
18 days ago16 proposalsRemote