Cartoon Drawing Projects

opportunity

UK Building reg drawings package

Good afternoon it would be great to speak with someone about this project, I have a project that I need a full set of drawings, calculations, structural and construction details/renders - I can provide more info when we speak more, the house is already in planning submission to convert into 4 flats. Please do not accept this job if you can not complete by the 4th June 2026 - as this is a condition of the project

Designing a children book

I need a designer that is expereince and patient creating a children book, i have the script and illustrated cartoon characters already illustrated, as i have already written series of books for this as the project will become ongoing, just need it now to become alive.

opportunity

Pre Application architect drawings of attic conversion

I propose to fully convert the attic: add another floor to an existing building. I need a cost estimate of the Pre Application submission because application may be turned down AND I'll lose the application fees - so can't afford to spend too much on the Pre Application stage. Submissions: a site plan, a location plan, existing and proposed plans, sections and elevations in: Adobe PDF .pdf Microsoft .doc/.docx, images .jpeg/.jpg 1:1250 location plan - with the site outlined in red Sketch plans* at scale of 1:200 at A3 size - showing proposed layout of the site Sketch plans* at a scale of 1:200 at A3 size - showing the scale of proposed building Needless to say, I will send you all details and dimensions and photos. Thanks

Seeking someone to draw gadgets and weapons

Seeking an imaginative illustrator to design distinctive gadgets and weapons for a comic-book universe. Each meticulously rendered piece will be showcased on my website with its own profile page, featuring visuals and descriptive lore, and linked to the character who wields it. I seek inventive, cohesive designs that enhance storytelling, convey function and personality, and fit the universe’s aesthetic. Professionalism, consistency, and timely delivery are essential.

opportunity

Design & Full working Drawings

Architect / Architectural Technologist Required – Timber Framed Educational POD Building Edspace are looking for an experienced Architect or Architectural Technologist to produce Building Regulations compliant working drawings for a timber-framed school POD (“Edpod”). The initial project is for a simple 6m x 4m standalone timber-framed education building, with potential for ongoing work on future projects across the UK. Scope of Work • Produce full technical / working drawings • Prepare Building Control compliant drawing package • Construction details suitable for manufacture and installation • Coordinate with structural engineer where required • Amend drawings following Building Control comments if needed Requirements • Experience with UK Building Regulations • Experience producing technical drawing packages • Timber frame and/or modular building experience preferred • AutoCAD or Revit capability • Good communication and reliable turnaround times Please send: • Examples of relevant previous work • Your availability • Estimated fee or hourly rate • Typical turnaround time We are looking to build an ongoing relationship with the right person for future Edpod projects.

Site plan concept - small housing estate

Assignment is to prepare a site plan planning drawing for a proposed development of 6 residential dwellings on a site in the UK, based on my specification and hand drawing. The site plan drawing is required for the purpose of illustrating a potential use of an existing commercial site. The drawing needs to show the plots, buildings (houses, garages), gardens, drives, road access, verges, screening/trees, superimposed on a location/site plan for the commercial site. Example plan is attached.

opportunity

Creation of cad drawings for existing elevations on a building

Seeking an experienced draughtsperson to produce precise CAD elevations of an existing building. Floor plans are provided; you will draft accurate exterior elevations to verified scale, deliverable in DWG and PDF formats. Require meticulous attention to measured dimensions, clear linework, layer organization, and adherence to standard drafting conventions. Prior experience with measured surveys and architectural detailing preferred. Timely delivery and quality assurance essential. Building will need to be measured or scaled from the floor plans

CAD Designer consumer product - 3d model & engineering drawings

Hi, I'm looking for a CAD designer to create a 3D model and engineering drawings for a physical product - a modular shoe lift attachment (similar to the EvenUp shoe balancer). I have a concept image and full technical specification document ready to share. What I need delivered: - 3D model in .STEP format - Engineering drawings in PDF with critical dimension callouts, material callouts, and a basic assembly drawing showing how all components fit together Reference size is UK 8. Main materials are rigid TPU/plastic, flexible TPU, and EVA foam. Please only get in touch if you have experience with physical consumer products involving plastic or TPU components. Thanks

opportunity

Puzzle game

Looking for an experienced mobile game developer/team to build a fast-paced turn-based puzzle battle game inspired by Match Masters and Candy Crush, with original combo-based gameplay. Core gameplay: - Match coloured tiles - Charge funny collectible troops - Activate troop abilities that manipulate the board - Create massive combo chains and cascades - Competitive score-based battles Key features: - 4v4 troop battles - PvP gameplay - Board-manipulation abilities - Combo multipliers - Funny/cartoon art style - Simple but addictive gameplay loop - Upgradeable troops - Mobile-first UI/UX Looking for: - mobile game experience - Match-3/puzzle game experience preferred - Multiplayer/PvP experience is a bonus - Strong animation and satisfying gameplay feel Goal: Create a highly replayable, easy-to-learn combo battler with strong mobile retention and expansion potential.

opportunity

Complete a BRE Daylight assessment on a 1 bed cellar conversion

Please only apply if you have completed the assessment and have a succesful related planning application. Fee is PPH generated so ignore. I require a a BRE Daylight assessment on a 1 bed cellar conversion in an existing property. The 3D file and CAD drawings are available. Please send copy of the report you have completed.

opportunity

Reconfiguring a house to meet need of a family

I need a design for the reconfiguration for the downstairs of a house to be divided into 2 units . Will need a set of drawings for builder

Huge GTA graphics to cover wall in workshop

Hi I'm looking for someone to draw some large graphics to go on our workshop walls 7000mm x 2900mm x 2 and 4800mm x 2900mm I've used AI to come up with some ideas please see attached room as it is now with white walls and the AI images Thanks

Freelance Structural CAD Support

UK structural inspection and investigation firm seeks freelance Structural CAD support to augment our in‑house team during a busy period. Responsibilities include producing accurate CAD drawings from site data, revising existing plans, and ensuring compliance with UK standards. Ideal candidate will have strong technical drafting skills, experience with structural details, proficiency in AutoCAD or similar, attention to detail, and reliable delivery. Engagement offered outside IR35 for SME collaboration.

opportunity

Freelance Architectural Draughtsperson

I am a London-based Town Planner currently transitioning into private practice and seeking to establish a small, reliable pool of freelance draughtspersons capable of producing accurate, scaled technical drawings for UK planning submissions. The work will primarily relate to permitted development (PD) schemes, including prior approval applications and certificates of lawfulness. The role is production-focused rather than design-led. You will be responsible for preparing planning-ready drawing packs based on structured information provided. All drawings must be accurately scaled (typically 1:50 or 1:100), clearly annotated, consistent in presentation, and suitable for validation by UK local planning authorities. You will be working from a combination of structured measurement data provided by homeowners under instruction, marked-up sketches and/or reference layouts, photographs of the property, AI-generated draft layouts where applicable, and clear written instructions and planner mark-ups. The ability to interpret and rationalise imperfect or incomplete input data is therefore essential. The scope of work will generally fall into two categories. For prior approval applications, the requirement will typically be limited to existing and proposed block plans. For certificates of lawfulness, a full drawing set will be required comprising existing and proposed ground and first floor plans, existing and proposed roof plan, existing and proposed front, rear and side elevations, and an existing and proposed long section. Applicants must have demonstrable experience producing UK-specific planning drawings and a clear understanding of existing versus proposed conventions, scaling standards, and annotation clarity within a residential context. Proficiency in AutoCAD or equivalent software is required. Experience with permitted development schemes and familiarity with local planning authority validation requirements would be highly advantageous. All work will be undertaken remotely. You will not be required to attend site, and all measurements will be provided. Your role is to accurately translate the information received into compliant drawing sets, which will be reviewed prior to submission. If this role is of interest, please provide relevant examples of UK planning drawings (including plans, elevations and sections), together with an indication of cost for both (a) a prior approval drawing pack (block plans only) and (b) a certificate of lawfulness drawing pack (full set as outlined above). Please also confirm your approximate turnaround time for each of these drawing types, the software you use, and your availability for ongoing work. As proposals will be taken forward on a national basis, there will be some degree of homeowner engagement in relation to providing measurements. Please confirm whether there is any additional information, verification, or safeguards you would typically require when working from homeowner-supplied data to ensure accuracy. Ongoing work is anticipated for the right candidate, subject to quality and reliability. I look forward to hearing from you.

opportunity

MEP REVIT design technician

Seeking an experienced MEP Revit design technician proficient in British standards and metric units. Deliverables: HVAC, electrical and plumbing systems, schematic diagrams and coordinated layout drawings. GAs and DWG files will be provided. Ideal candidate has demonstrable previous project experience and strong Revit proficiency. Work will form a case study for a publication, with professional credit awarded for contributions. Accurate, code-compliant designs and clear documentation required.

Residential HVAC Design Engineer (Ongoing Work)

We are looking for experienced residential HVAC design engineers who regularly perform load calculations, equipment selection, and duct design for U.S. residential projects. We are currently evaluating long-term partnerships for a growing pipeline of residential HVAC design work and would like to understand typical workflows, turnaround times, pricing, and deliverables from experienced professionals in the industry. Scope of Work For an initial project, we need a complete HVAC design package for a 5-bedroom single-family residence, including: Manual J load calculations Manual S equipment selection Manual D duct design Room-by-room airflow calculations Supply and return layout Register and grille sizing Equipment schedule Duct fabrication details Bill of materials Installation notes Deliverables Load calculation report Equipment sizing documentation HVAC design drawings (PDF) CAD files (preferred) Duct layouts and fabrication details Material takeoff / bill of materials What We'd Like to Learn Please include: Your typical turnaround time Your pricing model (per project or hourly) Software used (Wrightsoft, Elite, CoolCalc, AutoCAD, Revit, etc.) Number of residential HVAC designs completed Whether you work directly with contractors or homeowners Ideal Candidate Strong experience with U.S. residential HVAC systems Familiarity with ACCA Manual J, S, and D methodologies Experience delivering fabrication-ready duct designs Previous work with HVAC contractors preferred This may lead to recurring work for the right candidate.

opportunity

Arc GIS training for 2 members of our team

Hi, we are looking for someone who is expert in Arc GIS to help us with some internal training for 2 or 3 members of our team, online training is fine, and we would record the session for future reference back. We do a limited number of things in ArcGIS which creates the mapping for LVIAs as follows: - we create Site Context Plans of the project site we are looking at and a defined radius for residential developments, from 10 to 4,000 homes. We include datasets of designations, from government and local council websites. - we create topography plans for the same study area as above - we create landscape character plans which uses downloadable datasets and sometimes we have to draw the data if it is not available for the same study area as above - we create ZTVs and viewpoint location plans, using GPS points we have taken on site. So its training for creating the mapping, creating the sheets, downloading and importing the data, importing OS mapping, Its not complicated stuff, and some of it is already templated. but it is about helping the team to be confident with using GIS and giving them a good grounding into GIS. So I think perhaps training split into a couple of hours each session, over a course of sessions is probably the best way to train. We need good communicators who are experienced at training and explaining basics through to more complex ideas. I have included an example of mapping to give you a feel for what we produce for projects.

urgent

Urgent UK accountant for Goodlord reference

I urgently need a qualified UK accountant to help with a Goodlord tenant referencing issue. Important clarification: I do not have standard payslips, SA302, or my latest completed Self Assessment tax return available. That is the reason I need the accountant referee route. I am a UK limited company director. Goodlord has reopened my referencing application and said they may be able to verify my income if an accountant acts as my referee and confirms my income or projected income. The specific help I need is an accountant who can urgently review alternative evidence this weekend, including business bank statements, personal bank statements, marketplace revenue records, company details, a simple monthly P&L / management summary, and evidence of director drawings / transfers. If the evidence supports it, I need the accountant to respond directly to Goodlord confirming my current or projected director income. I am not asking anyone to confirm anything unsupported. I need a qualified accountant to review the evidence and confirm only what can properly be confirmed. Goodlord requires: 1. Full name of accountant referee 2. Accountancy firm name 3. Business email address, not Gmail/Yahoo/Hotmail 4. Landline number Requirements: 1. Must be UK based or experienced with UK limited company directors 2. Must be professionally qualified or part of a recognised accountancy body, for example ACCA, ICAEW, AAT, ICAS, CIPFA or similar 3. Must have a proper business email address 4. Must have a firm landline number 5. Must be willing to respond directly to Goodlord 6. Must be able to review documents urgently this weekend, ideally before Monday 7. Must be able to confirm whether this can be done without payslips or a completed latest Self Assessment tax return This is time critical because the property may go back on the market. Please only reply if you can move quickly and understand the specific issue. Please do not apply if you can only confirm income from payslips, SA302, or a completed tax return.

OCR - accuracy essential

OCR JOB — TWA Community Group Archive I have one folder containing 63 scanned PDF files. I need you to OCR all of them into a single plain text file. https://www.dropbox.com/scl/fo/g1hccz6s8zbr3v0w9qbb6/AFWOk_Tre7RfzXRIsNdcJm8?rlkey=ocvdld4302j7g9xzrq82uro5u&st=mkiuha0d&dl=0 --- DELIVERABLE — ONE .txt FILE (UTF-8 encoding) All 63 documents go into one file, in numerical scan order. Each document must start with this header, using the original PDF filename as the Document ID: ============================== ARCHIVE_FOLDER: TWACG1 DOCUMENT_ID: Adobe Scan 30 Sep 2025 (1)_combined.pdf DATE: [copy date exactly as it appears in the document, or write: Unknown] PLACE: [copy place exactly as it appears in the document, or write: Unknown] ------------------------------ Then paste the full OCR text of that document. Then start the next header block. Do not create separate files. --- OCR RULES — PLEASE READ CAREFULLY Copy the text EXACTLY as it appears. This means: - Do not correct spelling mistakes - Do not correct grammar - Do not rewrite sentences - Do not summarise anything - Keep all paragraph breaks - Remove page numbers - If a word is unreadable, write [illegible] - Do not add any commentary or notes of your own Accuracy is essential. The point of this job is a faithful record of what is written. --- HAND-DRAWN DIAGRAMS (may or may not appear in this job) If a page is a hand-drawn diagram or technical drawing, do not attempt to OCR it. Instead write: HAND-DRAWN DOCUMENT Title: [if visible] (no readable text) --- This work must be completed within 5 days of the job being accepted.

ArchiCAD Specialist for Prefabricated parapet mapping.

We provide specialized **Installation-Ready Dparapet** for prefabricated balcony and roof parapet systems. We are looking for a long-term freelance partner to handle **20–30 small projects per month**. **Your Task:** * Receive architectural PDFs and SOPs with marked installation areas. * Place parapet components (panels and metal posts) into the layout. * Ensure technical accuracy for aesthetics and load-bearing. * **Deliverables:** 3D DWG files, PDFs, and a detailed Bill of Materials (BOM). **The "Worker-First" Standard:** * The drawing is a **site manual**. If a worker has to measure a plate to find its location, the plan has failed. * Every non-standard panel needs a **Unique ID** (e.g., Pos. A01) visible in plan and elevation. * IDs on the plan must match the physical labels on the products. **Logistics:** * **Volume:** 30–40 projects/month initially. * **Speed:** **24-hour turnaround** per project. * **Time:** Each project takes approximately 40–60 minutes. * **Software:** ArchiCAD (preferred) or Revit. **Selection Process:** We are starting with **paid trials** to validate skills. Once the output is approved, we will move to a permanent freelance agreement. **Interested?** Please share your charges per project for trial and long term), availability, and experience with ArchiCAD.