Cartoon Drawing Projects

Need some Google Search Console support

We launched our new website about a month ago and have taken a bit of an SEO hit. I would like to get some expert support to help us develop a plan for moving forward. The initial job would be a two-hour consultation where we review Search Console and our WordPress settings to assess our current status, and then draw up an immediate to-do list. There may be other work off the back of this, but please quote for the initial consultation. Please mention the blue badger in the first line of your proposal. If you don't, I will discard the proposal.

CAD Technician for a Joinery comapany

Hi. I have a joinery workshop in the UK and I am looking for someone to take our Sketchup models and generate initially layout darwings and then fabrication drawings once approved with some DXF files for CNC fabrications.

Floor Plan Idea under the Structural walls

HI I need rough ideas where i can place what if i give you a walls and open plan drawing, like where it is good to have a kitchen, possible location for living and guest room and wetroom and utility room. I will provide a boundary walls and inside walls drawing which cant change and need someone to give me 2 3 possible floor plan. Ideally where i can have 2 living and 1 guest room, wet room, kitchen, dining and utility. I do not need exact room size just lines will be fine and.

opportunity

Laser measuring Watford

We are needing somebody who can laser measure the outside of a building for us in Watford. This is a supermarket on the high street. Please could you confirm costs to measure 2 elevations (front/rear) and send us measurements as we need to produce some external elevation drawings for a planning application. Only respond if you are able to carry this out in person in Watford.

Tithe house basement

I confirm I need assistance with Tekla Structural Designer (TSD), not Tekla Structures or Tekla Tedds. I’m modelling a simple residential basement. I have the project drawings and key inputs, but I need support with the correct modelling approach and analysis setup in TSD (slabs/walls/support conditions, load application, combinations, soil/foundation assumptions as applicable). Expected output: support with model validation (checks that the model is set up correctly and behaves realistically), and guidance to obtain a clear, defined set of design outputs/results (governing cases, utilisation, reinforcement outputs and any key checks required for reporting). Thanks, Bopanna

I need someone to do a 3D Model in Revit or Sketch up or 3D max

We are looking for a skilled 3D modeler to create accurate architectural 3D models using Revit, SketchUp, or 3ds Max. The model should be based on provided drawings and meet professional architectural standards. Requirements: Strong experience in Revit, SketchUp, or 3ds Max Ability to model accurately from 2D drawings Good attention to detail Ability to deliver on time

opportunity

Web Design, Logo Design, Backend Chat/Phone Set Up

We are looking for someone who is creative. I need a small, Simple but welcoming website that offers visitors in distress or any mood an easy way to reach out and feel heard. The overall look must feel warm and inviting—soft colors, calm imagery, clear typography—so people instantly sense they have come to a safe place. Pages & purpose •Home Page: Its single goal is to share our introduction and mission in an empathetic, uplifting voice. Must be creative. If you cannot do cartoon designs, anime designs, or designs of that nature, please do not bid on this project. • Booking page: visitors should be able to choose a time slot, see it in a live calendar, start an instant chat with a consultant if they have questions, and receive an automatic email confirmation once the booking is complete. Phone or Chat sessions • Donation page: straightforward, trustworthy design that makes giving simple and secure. • About page: short bios and our back story so users know the people behind the service. • Plus a simple, memorable logo that carries the same comforting tone as the site. • Contact Page • Login • Registration (With Questions) • Simple Member Profile Page • Crisis hotline Page • Check out Page Backend • Easy login system for team members • Easy chat system • Easy call system • Easy email system We hired a designer who started the project for us, but unfortunately, we just couldn't get on the same page design-wise. We can show you what they created, what we thought was incorrect, and why we couldn't get on the same page, but we do not want what they created. The project is currently on Wixs platform. We would like to keep it there. As we grow, we may change where we host it or the whole design in the future, but for now, we would like to keep using the platform we're on. Unfortunately, for the next person that we hire, you won't have the full-time frame that the original designer had. We spent an entire month just on the design, and we just kept getting further away from meeting in the middle.

I need 3D desiger using solidworks software

We are seeking a proficient 3D designer with expertise in SolidWorks to assist in the development of innovative designs for our upcoming projects. The ideal candidate will possess a strong understanding of 3D modeling, simulation, and product visualization. Responsibilities include creating detailed 3D models, assemblies, and technical drawings, as well as collaborating with our engineering team to refine concepts. A keen eye for detail and creativity is essential. If you are passionate about design and possess a solid background in SolidWorks, we encourage you to submit your proposal for consideration.

Сreator UGC for TIKTOK

I am looking for creators who can produce content in any language. Preferably from South Korea, The Netherlands, Sweden, UK but not required. Creators from other countries also welcome :) An iPad and Apple Pencil are REQUIRED!! You can't work with us on Android. This is a long-term job, and it also includes a paid test assignment to assess your understanding and suitability. 2 short videos per day, you just need to shoot the process of drawing. I will send more info if you are interested and want to start!

Children’s Game instructions Illustrator

Hi! I’m looking for an illustrator to create a set of 5 clean digital illustrations for a board game instruction guide. I currently have 5 AI-generated reference drawings that show the exact scenes/compositions I need, but I need them redrawn from scratch by a human illustrator as original artwork with no AI tools used at any point. These illustrations will be used commercially for a physical board game. This project is focused on recreating the concepts and layouts clearly (instructional visuals), not creating new scenes from scratch. What You’ll Be Doing • Redraw 5 reference images into clean, professional digital illustrations • Maintain the same composition/action so it matches the game instructions • Improve clarity and consistency across all 5 illustrations • Deliver final artwork in print-ready format Style Needed • Simple, clean, easy-to-understand visuals (instruction guide style) • Consistent characters/objects across all images • Minimal background / clean lines preferred • Color or black & white is okay (depending on your style — please share recommendations) Deliverables • 5 final digital illustrations • High-resolution files suitable for print • Preferred formats: • Editable source files: AI / PSD / Procreate / SVG • Exported files: PNG (transparent background) + PDF IMPORTANT: No AI Policy This is a strict requirement: • No AI-generated art • No AI-assisted drawing • No Midjourney / DALL·E / Stable Diffusion • No AI “image-to-image” redraw tools • No AI tracing/filters Artwork must be 100% human-created and original. You must be comfortable confirming that your work is created without AI and can provide progress screenshots if needed. What I Will Provide • The 5 reference images • Notes on what each illustration needs to communicate • Any game components/character references if applicable Ideal Illustrator • Strong linework and clean digital illustration skills • Experience creating instructional illustrations or board game art is a plus • Great communication and willing to revise based on feedback Timeline I’d love to complete this within 1 week

Structural Engineer

I am looking for an experienced Structural Engineer familiar with UK Building Regulations to support residential projects including single storey extensions, double storey extensions, and loft conversions. The role involves producing structural calculations and drawings suitable for Building Control approval, including beam sizing, load calculations, foundation assessments, and roof alterations. You must have proven experience with UK residential projects and be confident working with Building Control requirements. Good communication and reliable turnaround times are essential. Ongoing work available for the right candidate. Please include examples of previous work, your typical turnaround time, and your pricing structure when applying.

Structural Engineer to review as-built dormer roof + foundations

I need a UK-based structural engineer confirm the structural design for my house project and produce a Building Control–ready pack. Part of the loft conversion (including a pitched dormer) has already been built and Building Control have said there are things missing from the previous engineer’s calculations because they do not show how the dormer integrates into the roof or how the ridge is supported. I now need an engineer to review the as-built structure (photos available) and issue revised calculations and drawings that building control can approve. I need someone who is able to put together the information required by building control. I attach the previous document but this is the reply I got from building control: I also need some calculations to confirm that the 2 story (1.5 story really...) extension built from 200mm structural insulated panels (SIPs) are suitable at 1m depth in clay soil. Good morning and thank you for sending through the structural calculations. Having had a quick look through that information, it appears there maybe some information missing in that document, as there is no reference to the pitched loft dormer section of the roof to the loft conversion and how that integrates with the main roof? We would normally expect the engineer to produce a drawing that shows all the roof timbers and structural supporting beams for a loft conversion. At present the only drawing section in the calculations document appears to show only the main roof section, with no reference to the additional load that will come from the pitched timber dormer section, that will need to connect into the main roof/ridge timber. The dormer side wall/timbers also need to be supported and generally those would need to be either double or triple timbers each side to support those side cheek walls. We would also query/question the fact that only a single ridge board is shown to the main roof. Generally, where a dormer roof is formed as part of a loft conversion, we would normally expect to see either a flitch beam or even a steel ridge beam used at that location where there may be additional loading paced on the ridge . This is something we feel the engineer would need to consider and provide calculations & additional drawing details for please as part of their design at this stage. If there are any other beams required as part of the extension works, then those should also be included within the structural calculations please. Please discuss this further with your engineer and re-submit any additional information when completed for the loft conversion.

Convert hand drawn plans to CAD

We are seeking a proficient CAD designer to transform hand-drawn house plans into precise CAD drawings, providing a DWG file that includes detailed elevations and sections. The project will involve implementing minor interior modifications and corrections to the original plans. Additionally, each page must be formatted with title blocks, and comprehensive door and window schedules should be incorporated. It is essential that the final output adheres to Imperial/US standard measurements, as this will be utilized for a planning application in the US market.

DWG to Archicad

I am seeking a skilled professional to convert a DWG drawing into an ArchiCAD file, along with the creation of a 3D model. The project requires meticulous attention to detail to ensure that all architectural elements are accurately represented in the ArchiCAD environment. The ideal candidate will possess extensive experience with both DWG and ArchiCAD software, ensuring a seamless transition from 2D to 3D. Please provide examples of previous work and an estimated timeline for completion. Your expertise will be invaluable in bringing this project to fruition.

Fluoro-K System Design - Clean Agent

I need a complete KIDDE Fluoro-K fire-suppression design for a mission-critical data center. The scope covers every layer of the system—detection and alarm, agent storage and piping, and the control panel logic—so the final package must be fully coordinated and ready for submittal to both the client’s facilities team and the local AHJ. Code compliance, coverage, and hardware compatibility must be followed. The room layouts, server rack densities, and ceiling heights are already fixed; what’s missing are the hydraulic calculations, concentration verification, nozzle selection, and all related CAD drawings. Please base your work on NFPA 2001 along with any KIDDE engineering bulletins that apply. I’ll provide architectural PDFs as we start. Your tasks: • Detailed flow calculations with safety factors • Plan, elevation, and isometric drawings in DWG + PDF • Panel cause-and-effect matrix tied to smoke detection zones • Bill of materials identifying KIDDE part numbers • A short narrative justifying design assumptions if needed

'Where's Wally' style YouTube thumbnail design required

I am looking for a talented illustrator to create a captivating "Where's Wally"- style YouTube thumbnail. The ideal candidate will transform a hand-drawn sketch into a vibrant, intricate illustration that invites viewers to explore and discover hidden details. This project demands exceptional drawing abilities, featuring numerous small characters and scenes with clean, legible line work and a thoughtfully curated color palette. The final deliverable should be a 1280 × 720 px PNG file, accompanied by the source file. I have attached a rough sketch of the design to give you an idea of the detail involved.

A 'Where's Wally' style YouTube thumbnail design

I am seeking a talented illustrator to transform a hand-drawn sketch into a vibrant, intricately detailed YouTube thumbnail inspired by the "Where's Wally" concept. This project demands exceptional drawing skills and a flair for creating visually dense compositions that encourage viewers to explore and discover hidden elements. The final illustration should feature numerous small characters and scenes, with a playful tone. The deliverables include a full-color image sized at 1280 × 720 px, in PNG format, along with the source file. I have attached a rough sketch to give you an idea of the detail involved.

Freelance Womenswear Fashion / Technical Designer

I’m looking for a freelance womenswear fashion designer or technical designer to help translate my design ideas into clear, factory-ready tech packs. This is a short, defined project to start, with potential for ongoing work as the brand develops. Project Scope Create 4 womenswear designs- one is the same design different fabric Translate my concepts into: Flat drawings (front & back) Basic but clear tech packs suitable for manufacturing These designs will be used for sampling and small-batch production with manufacturers in China What I Will Provide Written descriptions of each design- looking for someone who is happy to discuss each design on zoom/phone Reference images / inspiration (e.g. Pinterest or similar) Guidance on: Target customer Desired fit (relaxed / tailored / structured) Fabric ideas (e.g. silk, cotton, viscose, etc.) What I’m Looking For Please apply only if you have experience with apparel production. Required: Experience in womenswear fashion design Experience creating tech packs for factories Understanding of garment construction (seams, linings, closures, etc.) Ability to produce clear, simple flats (not just artistic illustrations) Comfortable working with startup / small brands Ideal (but not essential): Background as a technical designer or garment technologist Experience working with overseas manufacturers Familiarity with small-batch or low-MOQ production Deliverables For each of the 4 styles: Flat drawings (front & back) Basic tech pack including: Construction notes Fabric & trim notes Measurement guidance (can be approximate at this stage) Files delivered as PDF (editable format preferred if possible) Budget Open to discussion — please include: Your price per style or for the full project What level of detail is included at that price How to Apply Please include: A short introduction Examples of womenswear flats or tech packs you’ve created Briefly explain your experience working with manufacturers or production teams Notes This project is for initial sampling, not final production perfection Clear communication and practical production knowledge are more important than high-fashion illustration There may be ongoing work for the right person Thank you — I look forward to hearing from you.

I need a works for house plan...and other work from home...

I am seeking a skilled freelancer to assist in creating detailed house plans using AutoCAD, both in 2D and 3D formats. The project requires expertise in architectural design and an understanding of building codes and regulations. The ideal candidate will possess a strong portfolio showcasing previous house plans and the ability to translate ideas into precise, technical drawings. Timeliness and attention to detail are essential, as the final output will be used for construction purposes. Please submit your proposals, including examples of relevant work and your estimated timeline for completion.

Logo design for Magma Films

We are seeking a talented graphic designer to create a logo for Magma Films, Magma Productions, and Magma Entertainment. The design should draw inspiration from the Pictorion Magma Animation logo while omitting the "PICTORION" text and eye symbol from Das Werk. Retain the MAGMA text's style, size, and positioning, substituting "ANIMATION" with FILMS, PRODUCTIONS, or ENTERTAINMENT. Incorporate a blue organic shape with a gray drop shadow, utilizing a vibrant color palette of blue, purple, pink, red, lime green, orange, yellow, cyan, black, gray, white, and beige. The final deliverables will include 12 color variations and 19 logo variations at resolutions of 19, 38, 57, 76, and 95, provided in PNG and JPG formats without watermarks. A detailed color documentation (HEX / RGB / CMYK / Pantone values) will accompany the final PDF delivery.