Autodesk Alias Projects

Autodesk Revit Expert

I have a DWG file of site with surveyed trees as well as a PDF layout of the building. I need a revit model with site contours, plan views, 4 elevations and 4 section views. This is for city review. Do not send the proposal if you don't have experience. https://drive.google.com/drive/folders/1dZ5PwSrpATTyZj-fgr9iNuxcUpjme4da?usp=sharing

KSPAN Structure Walkthrough Video

Dear Freelancer, We are planning to develop a resort project based on a KSPAN structural concept. We require a complete 3D design model and walkthrough video that clearly showcases both the interior and exterior design. Please note: We will provide an AutoCAD file for reference (dimensions only). The attached image is AI-generated and should be used as a concept reference, not the final design. Scope of Work: You are required to: Create a detailed 3D model using software such as Autodesk 3ds Max (or similar). Develop a high-quality walkthrough video covering all areas of the project. Design Requirements: The 3D model and walkthrough should include the following: 1. Interior Design 2. Internal flat white ceiling 3. Design for each floor 4. Hotel room interiors 5. Lift/elevator 6. Coffee shop connected to lobby 7. Gym and spa 8. Lobby area 9. Reception area at the entrance 10. Restaurant 11. Concert hall Exterior Design: 1. Overall KSPAN structure appearance 2. Swimming pool 3. External flexible solar panels on the roof 4. Landscape Walkthrough Expectations Smooth and realistic walkthrough (day & night views preferred) Highlight all amenities listed above Include both interior and exterior perspectives Deliverables 3D model files High-resolution renders Final walkthrough video Reference Requirement: Please share similar sample videos/projects you have completed that are relevant to: 1. Resort or hotel design 2. KSPAN or steel structure buildings 3. Full walkthrough animations Please review and confirm your understanding, timeline, and cost for this project.

Revit BIM Modeling for Architectural & Structural Project

We are seeking a proficient BIM/Revit designer with specialized expertise in Architectural and Structural modeling for an upcoming project. The responsibilities include developing comprehensive 3D BIM models in Revit, adhering to Levels of Development (LOD) 300-350, and generating detailed plans, sections, elevations, and fundamental construction drawings. The ideal candidate will ensure accurate levels, grids, families, and parameters are established. Optional skills in clash detection using Navisworks would be advantageous. Candidates should possess substantial experience with Autodesk Revit, a solid grasp of BIM standards, and the ability to interpret drawings, PDFs, or CAD files meticulously. Attention to detail and punctuality are paramount. This initial task may evolve into a longer-term freelance opportunity, contingent upon the quality of work delivered.

Revit work file edit and add site plan

I need support editing an existing Revit work file and adding a detailed site plan. The project involves updating the current Revit model with accurate site information, ensuring proper alignment with architectural drawings, and delivering a clean, professional file ready for documentation and visualization. Scope of work: • Review and edit the existing Revit file • Add and integrate the site plan with correct dimensions and orientation • Ensure consistency with project standards and layers • Provide the updated Revit file and exported views (PDF/DWG if needed) Requirements: • Strong experience with Autodesk Revit (site plans + architectural modeling) • Attention to detail and accuracy in measurements • Ability to deliver within agreed timeline Deliverables: Updated Revit file + site plan integrated, with clear documentation. Please share examples of similar Revit projects you’ve completed. Speed is important, but accuracy is critical.

Architectural Designer and Drafter for Various Projects

We are seeking an experienced architectural designer and drafter to assist with a range of projects, including commercial, residential, multifamily, and tenant improvements. The ideal candidate will have a strong background in using Autodesk Revit. Knowledge of building codes and the ability to produce a complete set of construction documents are essential. Deliverables Create architectural construction documents using Autodesk Revit Ensure compliance with building codes Collaborate on commercial, residential, and multifamily projects Assist with tenant improvement projects

Beginner needs help

I'd like to a pay for an hours help with Autodesk Fusion. I'm not looking for anyone to 'fix' things but rather to guide me through some problems. I imagine I will send you some files and describe the problem I'm having and you will give me help in resolving this and maybe make suggestions about how better to create my designs or improvements I could do. I suspect that your time would be more about writing the help than actually fixing the problem. I'm very new to Fusion and my designs are very simple - that's not to say that what I want to achieve is necessarily 'easy' ... :-)

opportunity

I need an Autodesk AUTOCAD drawing of a vessel from a pdf

I seek a skilled CAD professional to produce a technical drawing of a vessel using Autodesk AutoCAD. The drawing must be created from detailed schematics provided in PDF format showcasing the intricate geometry of this industrial component. Strong visualization and technical illustration skills are required to comprehend complex engineering specifications depicted in two-dimensional drawings and recreate the vessel's intricate three-dimensional form and inner structures in the CAD program with utmost precision. Knowledge of technical drawing standards and practices is imperative to generate drawings suitable for manufacturing purposes. The produced files must be fully dimensioned and annotated AutoCAD drawings exhibiting an accurate tangent representation of all physical aspects and measurements of the vessel at appropriate scale and in relevant viewports. The goal is to obtain vectorized CAD models and drawings that can then be utilized for fabrication, assessment or modelling applications. Experience working with schematics and reproducing technical designs through AutoCAD is crucial. The ideal candidate will possess superb illustration and visualization talents along with expert skills in operating Autodesk software to bring this industrial component to life digitally from the provided schematics.

Convert 5 pdf pages to Autocad

I require digitization and conversion of technical drawings from PDF format to Autodesk AutoCAD. The source material consists of five pages of mechanical and architectural plans contained within a single PDF document. The goal is to have these schematics reconstructed as editable layer-based DWG files to facilitate downstream modification and revision. Familiarity with both AutoCAD and technical/engineering illustration is necessary to properly transition lines, dimensions, hatches and other details from their current raster appearance into intelligent vector objects. Additional tasks may include basic cleanup and organization of layers, text, blocks and other CAD elements to optimize the files for continued usage in a professional design environment. Experience handling such file conversions with care and precision is important as the newly digitized drawings will serve as the foundation for potential design refinements. The completed AutoCAD files should be returned to me no later than 6 pm Eastern Time today in order to keep the project on schedule. Qualified freelancers with demonstrated proficiency in technical illustration, CAD software and file formatting are encouraged to submit proposals.

Gmail to Outlook

This project involves migrating email accounts from Gmail to Outlook/Microsoft, including transferring email data, folders, and contacts. It requires creating two accounts under business alias names and ensuring a seamless transition of email information.

3D Visualisation Specialist for New Home –Renders & Walkthrough

Seeking 3D Visualisation Specialist for New Home – Renders, Walkthrough & Interactive Model Hello! I’m having a new house built and have received the full 2D architectural plans, including detailed floor layouts. To get a better sense of the space before construction begins, I’m looking for an experienced 3D visualisation professional to help bring the design to life. It's a terraced house on three floors (ground floor, basement and first floor - a covered area of approx 5,000 square feet with a rooftop terrace. **What I’m Looking For** I’d like support with the following: - High-quality still renders of key rooms, especially the living room and kitchen, furnished in a modern style - A video walkthrough** (pre-recorded animation) of the house interior - An interactive 3D model** that I can explore in real time (ideally desktop or browser-based) **Preferred Software** Experience with one or more of the following is essential: - Autodesk 3ds Max - SketchUp - Blender - Lumion - Or other industry-standard tools for modelling, rendering and animation **What I’ll Provide** - Full 2D architectural drawings (floor plans, elevations, etc.) - Style preferences and reference images - Room priorities and layout guidance **Budget & Pricing** I’m happy to share the drawings for a detailed quote, but I’d appreciate a **guide price** upfront based on similar past projects. Please include: - Estimated cost for each deliverable (renders, video, interactive model) - Timeframe for completion - Any revision policy **Requirements** - Proven experience in architectural visualisation - A strong portfolio showcasing similar work - Clear communication and attention to detail --- If this sounds like a project you’d enjoy working on, please get in touch with: - A brief introduction - Portfolio link - Guide pricing - Preferred software/tools Looking forward to collaborating and seeing this home come to life before actual construction starts.

I need a CAD Autodesk Fusion Expert for a short, urgent job.

I have a CAD model that I need adjusting. Ideally a Autodesk fusion expert for 1 hour of work. Looking to start this work immediately and complete within the next 3 hours. Thanks, Nico

Experience with Autodesk Fusion 360

We are looking for a CAD person who's both experienced with Autodesk Fusion 360 and experienced with sheet metal design/design for manufacture. Our existing CAD engineer generates solutions using Fusion 360 however they require additional person-power to produce the traditional 2D layout drawings that our manufacturers require. You will take the native Fusion files and, working remotely with our in-house team, help to generate these dimensioned layout drawings. This could be an ongoing requirement. Please reply in person - not using AI

opportunity

Channel System Installation Guide

Animation Requirements1. Content and Structure • Introduction (10–15 seconds): • Display a 3D render of the SFC 25-14 Restraint Channel and VS9 Tie with the Vista Engineering logo. • Include a brief text overlay: “RCS 25-14 Restraint Channel System: Ties masonry to steel or concrete frames.” • Installation Steps (1.5–2 minutes): • Fixing to Steel: • Show the SFC 25-14 channel positioned vertically against insulation, aligned with the steel frame. • Illustrate self-drill/self-tap screws fixing through the small 5.5mm holes in the channel, through insulation and CP board, into the steel frame. Highlight the under-head high thread preventing insulation compression. Add a text warning: “Do not use large 9.5mm holes for steel fixing—invalidates performance.” • Depict a VS9 tie inserted into the channel, rotated 90 degrees to lock, then lowered into the mortar bed joint with a minimum 65mm embedment. • Fixing to Concrete: • Show the SFC 25-14 channel offered up vertically to insulation, with hole locations marked on the concrete. • Illustrate drilling holes through insulation and inserting steel compression sleeves. • Depict drilling pilot holes into the concrete. • Show fixing through the large 9.5mm holes in the channel, through insulation and compression sleeves, into pilot holes with a minimum 35mm embedment. • Demonstrate tightening the fastener to the compression sleeve without deforming insulation. • Show a VS9 tie inserted, rotated 90 degrees to lock, and lowered into the mortar bed joint (minimum 65mm embedment). • Final Checks: • Highlight verifying vertical alignment, secure fixings, proper tie embedment, and 7mm vertical movement capability. • Closing (10–15 seconds): • Show the completed installation in a construction context with text overlays: “Corrosion-resistant, 60-year durability, BS EN 845-1 compliant.” • End with a branded screen: Vista Engineering Ltd contact details (Head Office: Carr Brook Works, Elnor Lane, Whaley Bridge, High Peak SK23 7JN, Web: www.vistaeng.co.uk). 2. Visual Style • Quality: Photorealistic rendering with detailed textures for stainless steel, masonry, insulation, and concrete; use realistic lighting and smooth transitions. • Branding: Incorporate Vista’s blue and white color scheme and logo throughout. • Text Overlays: Use clear, professional fonts (e.g., Trade GOTHIC) for step descriptions (e.g., “Small 5.5mm holes for steel,” “Large 9.5mm holes with sleeves for concrete”). • Camera Angles: Dynamic close-ups for fixing details (e.g., screw insertion) and wide shots for context (e.g., channel in cavity). 3. Technical Specifications • Length: 2–3 minutes. • Resolution: Minimum 1080p HD, preferably 4K. • Format: MP4 or MOV. • Frame Rate: 30 fps. • Audio: Professional voiceover (neutral British accent) narrating steps, with subtle background music. Provide a no-audio version. • Software: Use tools like Autodesk Maya, Blender, or Cinema 4D with V-Ray or Arnold rendering. 4. Reference Materials • RCS 25-14 Restraint Channel System datasheet (October 2023). • Installation instructions provided. • BS EN 845-1 standards. • Vista Engineering Ltd branding guidelines. Deliverables • Final animation in MP4/MOV (1080p and 4K). • Source files for future edits. • Storyboard and script for approval before production. • One round of revisions post-draft. Notes • Emphasize correct fixing: small 5.5mm holes for steel, large 9.5mm holes with compression sleeves for concrete. • Warn against using large holes for steel fixing to maintain system integrity. • Ensure the animation reflects the system’s ability to accommodate cavities up to 250mm and a 65mm minimum tie embedment. We are looking for something similar to a competitors: https://www.linkedin.com/posts/keyfix_keyfix-edc25-wallties-ugcPost-7348292610899292160-538O?utm_medium=ios_app&rcm=ACoAACmyZCQBG9yJ6yLInwX1W50FJ94a9rrBVfM&utm_source=social_share_send&utm_campaign=mail

opportunity

YouTube Visual Animation

Overview This is a 2-hour deeply emotional house mix with spoken word elements and original production under the alias ONYVA. The visual component should feel like a cinematic meditation, gently evolving with the music to take the viewer on a hypnotic journey of sound, emotion, and abstract reflection. We want this video to stand the test of time—something people come back to over and over for a full mind-body experience.

Experienced 3D modeller for indie game

Title: Experienced 3D modeller for indie game: Creating quality characters and environments Project Description: I am developing an indie game and am looking for an experienced 3D modeller to create quality 3D models of characters and environments. The project is well structured with clear requirements and deadlines. Note: This project also includes details of the antagonist, player animations, two protagonists and NPCs and the initial menu, which are an extension of the TOR and are provided for completeness. These details will be revealed as the project is discussed. Requirements: Creating realistic 3D models of characters and environments Using Autodesk Maya and Pixologic Zbrush for modelling and detailing Texturing and rendering models using Adobe Photoshop and Blender Integrating models into the Godot game engine Prerequisites: Budget: $350 Timeline: 2 months (1-3 months) Experience Level: Medium. Contract Type: Temporary (not expected to be full-time at this time) Expectations: Clear understanding of tasks and deliverables Good communication and regular updates on progress Willingness to give feedback and make adjustments Contact Information: Please contact me for more information and to discuss the project. Translated with DeepL.com (free version)

Next-Gen CGI & AI-Powered Video Creation

We are seeking talented CGI artists, 3D animators, and VFX specialists with expertise in creating hyper-realistic CGI videos, AI-powered faceless videos, motion graphics, GenAI and visual effects for films, commercials, and digital ads. You should have hands-on experience with tools like Autodesk Maya, Blender, Cinema 4D, Houdini, Unreal Engine 5, and Adobe After Effects.

opportunity

I need an Autodesk AUTOCAD drawing of a vessel from a pdf

I require the digital rendering of a vessel blueprint from a provided PDF file into an AutoCAD format drawing. The vessel design schematic is available as a technical diagram in portable document format. A skilled drafter is sought to recreate the vessel layout and intricate engineering specifics within the AutoCAD program through tracing and electronically redrawing the design schematic. Upon commission, the completed digital file utilizing the AutoCAD software shall be delivered along with high resolution print-ready reproduction files in both A4 and A3 paper sizes in PDF format. The reproduced design must capture every dimension and specification note with utmost precision and technical accuracy. The consolidated delivery will include the editable native AutoCAD file allowing for future revisions along with two presentation-grade reproduction packets suited for approvals or prototypes in standardized print sizes. Qualified bidders experienced in technical illustration recreation through AutoCAD are encouraged to apply with their rates.

FACEBOOK PULIC GROUP CREATOR

Dear I want people to be abloe to POST Resposbiliy and ANonummously on SOCIAL AND POLITICAL issues in my Country But I want to give them PRIVACY so the communiity can SEE the MESSAGE and NOT the MESSENGER Yes I want them to speak RESPOBIBLY at the same time w with no name calling So can you set up a PUBLIC FACEBOOK GROUP or Page ? I want the page that ANYONE can JOIN and do not need to be invited to the group So the GROUP or Page must be PUBLIC So 1) As I want perople in my country make their comments about social and poltical issues. But i want their name to remain ANONYOUS 2) Pleas set up the FB GROUP. INVITE me to JOIN 3) in the BANNER area of the Page please CREATE the words " SPEAK YOUR VOIICE RESPONSIBLELY without calling names 2) Set up a ALIAS to allow yur Privacy /Anonymity

Bridge Demolition and Reconstruction

Description: We are seeking an experienced structural engineer to assist with a critical project involving the demolition of an existing concrete bridge and the design of a new replacement bridge. This role requires a combination of structural analysis, detailed planning, and technical documentation. Scope of Work: 1. Demolition Planning: • Perform structural calculations for the existing bridge to determine safe demolition procedures. • Develop a comprehensive method statement for the bridge’s demolition, considering safety, environmental, and logistical requirements. 2. New Bridge Design: • Create a structural design for the replacement bridge, adhering to international and local codes. • Prepare a construction method statement for the new structure. 3. Technical Documentation: • Provide detailed reports and presentations for project stakeholders. • Prepare all designs and plans using professional tools and software. Skills Required: The ideal candidate should have expertise in the following areas: • Structural engineering for steel and concrete structures. • Proficiency in: • Structural Analysis Tools: STAAD.Pro, SAP2000, or equivalent. • Design Software: AutoDesk AutoCAD, Autodesk Inventor. • Documentation Tools: Microsoft Word and Excel. • Knowledge of international and local building codes. Preferred Qualifications: • Proven experience in bridge demolition and/or construction projects. • Ability to deliver detailed, clear, and actionable method statements. • Strong communication skills for presenting ideas and collaborating with project stakeholders. Application Requirements: When submitting your proposal, please include: 1. Examples of similar projects you have worked on. 2. Details about the structural analysis and design tools you use. 3. A brief outline of how you would approach this project. 4. Your availability (start date and hours per week). Attachments: Relevant bridge photos and drawings will be shared upon initial discussion. We look forward to collaborating with a skilled professional on this important project. Please don’t hesitate to reach out with questions or suggestions for enhancing the project scope. Best regards,