Freelance AutoCAD Jobs

Drawing Amendments

I’m looking for someone experienced in AutoCAD/civil drawings to make a few amendments to an existing highway access drawing based on some requirements provided by the client. The work should be fairly straightforward for someone familiar with UK highway drawings. Please only apply if you have experience with UK highway/access drawings and can provide an editable DWG and final PDF.

opportunity

PDF to dwg

We have just installed a fire alarm system, the contractor used an existing PDF to overlay his fire alarm points onto the PDF but it needs the floor plan re-drawn in AutoCAD and then the fire alarm contents added. I need this urgently.

Aulas de aprendizaje de peluquería, manicura y pedicura

Necesito preparar la documentación de un proyecto y necesitaría disponer de los siguientes planos, preferiblemente en formato AutoCAD (.DWG) o Revit (.RVT): Plantas arquitectónicas completamente acotadas. Alzados/elevaciones de todas las fachadas necesarias, con sus correspondientes dimensiones. Superficies y áreas en m² claramente indicadas en los planos. Plano de emplazamiento, indicando la ubicación del edificio/parcela y su relación con el entorno. Todos los planos deberán estar representados a escala 1:100. Incluir cotas generales y parciales suficientes para poder comprobar las dimensiones y superficies. El objetivo es disponer de una documentación gráfica precisa que pueda utilizarse para documentación de accesibilidad (Memoria descriptiva/técnica) para homologación de dos talleres daré mas información al que contrate para dar planos mas o menos hechos para terminar etc. english: I need to prepare the documentation for a project and would need the following drawings, preferably in AutoCAD (.DWG) or Revit (.RVT) format: Fully dimensioned architectural floor plans. Elevations of all required façades, including their corresponding dimensions. Areas and floor surfaces in m², clearly indicated on the drawings. Site/location plan showing the position of the building/plot and its relationship to the surrounding area. All drawings should be presented at a 1:100 scale. Include sufficient overall and partial dimensions to allow the dimensions and areas to be checked. The objective is to have accurate graphical documentation that can be used to prepare the accessibility documentation (descriptive/technical report) required for the approval/certification of two workshops. I will provide the person I hire with additional information and partially prepared drawings/plans to use as a basis for completing the final documentation.

opportunity

Layouts For House To Office Conversion

Seeking an experienced AutoCAD designer to transform hand-sketched, measured plans of a seven-bedroom house with one main bathroom into precise digital layouts. Phase one: produce accurate existing-layout drawings in AutoCAD from provided measurements. Phase two: develop two similar but slightly different proposed office layout that respects existing room constraints and optimizes space flow and functionality. Also provide a new electrical and lighting plan, integrating new and existing points. Deliver Cad file of both the existing and proposed layouts. Quick turnaround required.

Convert PDF files to autocad

Convert specified PDF pages into precise, editable AutoCAD drawings. Deliver clean, layered DWG files reflecting original linework, text, dimensions, and scales for pages E0.1, E1.2, E1.3, E2.1, E2.2, E2.3, E3.1, E3.2, E4.1, E4.2, E5.0. Ensure correct units, scalable vectors (no rasterized text), organized layers, and accurate annotation. Provide quality control to match original layout and maintain CAD standards for immediate use in drafting and coordination.

I need urgent AutoCAD/Rhino architectural drawing support

I urgently need CAD/Rhino support for an architecture university resit. The feedback says my work was missing clear plans, sections and elevations. I already have my own design, sketches, dimensions, model photos and previous portfolio. I don't need a new design; I need technical drawing support to draw up my existing design clearly. It would be 2 projects if possible, couldnt attach more than three pictures, current pictures are of project 01 I need: - 1:100 plans - 1:100 sections - 1:100 elevations - roof plan - 1:20 technical detail - PDF/PNG exports - editable DWG file - Rhino file if used Can you start today/tomorrow? Also, can you show me one example of a plan + section + elevation set you have done before? I would need them in two to three days if possible. Attaching one of the projects; there would be another one that would be a two-floor building, will attach pictures if you accept the job. This must be based on my existing design, not redesigned from scratch.

opportunity

3D model and external CGI renders – proposed detached house

I require a 3D model and photorealistic external renders of a proposed two-storey (plus attic) detached house in England. I will provide: – AutoCAD DWG floor plans and elevations – PDF drawings – site/location plan – building material/colour information – site photographs – reference photographs for materials/appearance. Please allow for: – creation of an accurate 3D model from the drawings; – realistic brickwork, roof covering, windows, doors, gutters/fascias etc.; – driveway, lawn and simple landscaping; – appropriate UK residential setting/background; – 2 high-resolution exterior CGI images, provisionally front three-quarter and one alternative view; – daylight/summer setting; – two rounds of reasonable amendments. Please confirm: – fixed total price; – number of renders included; – proposed software; – turnaround time; – number of revisions included; – whether the 3D model/source file can also be supplied; and – examples of comparable UK residential work. Thanks.

Microvellum CAD Drawings

Bespoke joinery drawings to be Converted from an AutoCAD drawing into a manufacturing drawing using the program Microvellum.

opportunity

Structural Calculations & Drawings – Commercial Rooftop Pergola

Integrated Frame and Form Ltd is seeking a freelance Structural Engineer or CAD Detailer to prepare structural calculations and Building Control drawings for a commercial roof terrace project in London. Scope: Eurocode calculations (wind uplift, snow loading, member sizing, stability checks) and post baseplate/fixing details for a 6-unit modular roof pergola (6.5\text{ m} \times 29\text{ m} footprint). Deliverables: Structural calculation pack and 2D CAD drawings suitable for Building Control submission. Sign-Off: Our practice will review, approve, and sign off/stamp all final calculations and drawings. Timeline: 7–10 working days for initial drafts. Budget: £850 – £1,200 fixed fee (50% milestone on draft delivery / 50% on final sign-off). Requirements: Solid experience with UK Building Regulations, BS EN 1991 (wind/snow loads), and 2D AutoCAD detailing.

2D Building Plan Drawings Update

2D building plan drawings update: UK domestic house renovation and extension. Existing drawings are PDFs likely exported from CAD; ideally import and update in CAD. If import fails, redraw accurately in AutoCAD to match original scales, layers and annotations. Tasks include cleaning geometry, updating walls, openings, dimensions, room labels and extension details, ensuring compliance with UK domestic drafting conventions and delivery of editable DWG files.

opportunity

Title: Local MEP Engineer Required – Cliff House, Kent

We are looking for an experienced **local freelance MEP / Building Services Engineer** to design and produce a coordinated, construction-ready MEP package for a new-build high-spec house in the **Northfleet / Gravesend, Kent** area. We will provide: * Architectural and structural drawings in **AutoCAD .DWG** * Structural steel fabrication/model in **.IFC** * Relevant project specifications and site access Scope to include: * Heating, cooling, heat pump and underfloor heating * Ventilation and ductwork * Hot/cold water and drainage * Electrical power, lighting and distribution * PV, battery storage, EV charging and controls * Coordination of all services with the architectural design and structural steel frame Required deliverables: * Detailed coordinated **MEP construction drawings in DWG and PDF** * Plans, sections, schematics and equipment layouts * Pipe/duct sizing and electrical distribution information * Builders' work, penetrations and service coordination * Clash coordination with the IFC steel model Applicants should have strong **AutoCAD and IFC/BIM experience**, knowledge of UK Building Regulations, and experience producing detailed residential MEP construction drawings. **Local engineers able to attend site when required are strongly preferred.** Please provide examples of similar work, your location, availability and proposed fee.

LIGHTING DESIGN FOR 5 BEDROOM SEMI DETACHED HOUSE IN DUBLIIN

Lighting Designer Required – 5-Bed Semi-Detached House, Dublin I am looking for an experienced residential lighting designer to produce a professional lighting design and lighting layout for a 5-bedroom semi-detached house in Dublin, Ireland. Project Information Full house renovation / residential project 5-bedroom semi-detached property AutoCAD drawings will be provided I already have a good idea of the light fittings / fixtures I would like to use I can provide details/specifications of the proposed fixtures Scope of Work I require someone to review the architectural drawings and develop a professional lighting layout, including: Recommended positioning of all light fittings Downlight positions and spacing Decorative pendant and feature lighting positions Wall lights where appropriate LED strip / concealed lighting locations where appropriate Consideration of furniture layouts, circulation and how each space will be used Appropriate lighting levels and distribution throughout the house Switching / lighting control recommendations where appropriate Clear identification of the different fixture types on the drawings A professional lighting layout that can be issued to the electrician for installation The objective is not simply to place lights evenly across the ceilings. I am looking for someone who understands residential lighting design and can consider ambience, task lighting, accent lighting, architectural features and practical everyday use. Deliverables Ideally, I would like: Lighting layout for each floor Fixture positions clearly dimensioned / located Fixture schedule / legend Switching or lighting control recommendations Final drawings supplied in PDF and AutoCAD/DWG format Experience Required Please provide examples of previous residential lighting design projects, preferably houses or high-end residential projects. Experience working with architectural AutoCAD drawings is essential. When applying, please also confirm: Your lighting design experience Examples of similar residential work Software you use Estimated turnaround time Number of revisions included Your fixed price for completing the project The AutoCAD drawings and proposed lighting fixture information will be provided to the selected designer. Location of Project: Dublin, Ireland

Redesign my second-floor apartment floor plan (AutoCAD + 3D)

I am looking for an experienced architect to redesign my second-floor apartment. IMPORTANT: - Keep all structural columns exactly as they are. - Keep the staircase exactly where it is. - Keep all exterior dimensions unchanged. - Only redesign the internal walls and room layout. Requirements: - 3 bedrooms. - Separate men's majlis with guest bathroom and wash area. - Closed kitchen. - Large family living room. - Modern Gulf style. - Practical circulation. - Good natural lighting. I already have the structural floor plan and PDF drawings. Deliverables: - 3 different layout options. - Final AutoCAD DWG. - PDF floor plan. - 3D furnished renders. Please send examples of similar architectural projects.

Gate design

I want to draw under autocad a desing for laser cut size 455x144cm

pre-funded

Ongoing long term rendering help- fast turnaround required

CAD Drafter and Interior Design Renderer (photoshop) - Fast Turnaround Required. Please do not use AI unless previously agreed to. Seeking an experienced and highly detail-oriented CAD drafter and renderer for ongoing freelance assignments, paid at an hourly rate. Many assignments will require same-day or very fast turnaround, so responsiveness and availability are essential. Please do not apply unless you can regularly accommodate urgent work and communicate clearly about turnaround times. Some assignments are small requiring an hour others may be more involved. Typical assignments may include: * Creating and editing floor plans and elevations * Converting PDFs into AutoCAD drawings * Creating CAD drawings of furniture and lighting from photographs and dimensions * Adding furniture to floor plans * Adding furniture, lighting, and other objects to elevations * Creating rendered floor plans and elevations * Revising existing drawings Accuracy and attention to detail are extremely important. The work should not simply be completed as quickly as possible. Every assignment must be carefully double-checked against the measurements and information provided. When furniture, lighting, or other objects are added to a plan or elevation, particular attention must be paid to: * Correct measurements and scale * Precise position and placement * Proportion and alignment * Following all instructions closely * Carefully checking the completed work before submission The ideal person will be diligent, responsive, accurate, and able to follow directions without overlooking details. If anything is unclear or missing, questions should be asked before proceeding rather than making assumptions. If the first few assignments go well, ongoing work will likely be available at least once or twice a week. When applying, please include: 1. Examples of relevant work, including floor plans, elevations, CAD drawings, and renderings 2. The software you use 3. Your hourly rate 4. Your time zone and 5. Your normal working hours and availability 6. Whether you can accommodate same-day or urgent assignments Please begin your proposal with “SCALE AND POSITION” so I know you have read the full listing.

UK Architectural Technologist for AutoCAD

Summary Looking for a UK-based Architectural Technologist or technical CAD designer for ad hoc AutoCAD drawing work on a commercial project. This is a small but ongoing requirement for a reliable freelancer. The ideal candidate will have experience in architectural design and drafting, with proficiency in Autodesk AutoCAD. Responsibilities include creating and editing AutoCAD drawings, ensuring accuracy and adherence to project specifications. This is 2 days work required by end Friday 24th July