- Views 426
- Sales 2
What you get with this Hourlie
I have been producing, mixing and mastering a wide range of music for around 14 years now and have worked on a wide range of music, from pop, ambient, electronica, trap, house, to grindcore, black metal, and industrial music. I am always looking to expand my skill and technique set as well and perfecting industry staples I already use.
I love working with people to get their ideas out and sounding as good as possible, so am looking forward to helping in any way I can.
I will use a wide range of techniques including compression, EQ, Maximising, widening and spacialising, Mid-side mixing, analogue and tape warming and saturation.
You can upload the file(s) and send to me via dropbox or wetransfer(Or other agreed service) and I will return in the same manner.
On receipt of the audio file(s) I will get in touch and we will discuss what is wanted for the track(s).
Once I have what I believe to be a finished product I will send you a 320kbps MP3 for you to review and I will make any changes you wish from there, I am happy to keep going until you are fully satisfied with the mastering of the track, so there are limitless revisions, as it is a fine detail situation.
Once the project is completed I will send original files back and the finished product In 320kbps MP3 and 16bit WAV 44.1kHz format (unless you specify otherwise).
What the Seller needs to start the work
A single audio file in WAV of AIFF (only Mp3 or other format if that is all you have - I can do these for you but they are much lower quality and you cannot reverse this)
24bit or 32bit at 96kHz is preferred but anything down to a minimum of 16 bit at 44.1kHz is fine.
Make sure to set your master output level to -6dB, or even lower if necessary, with no limiting on master track.
I would want to be in contact as much as we can, so I can understand fully what you are after, determine whether it is achievable and to iron out any issues on either end.