Piping Projects
Looking for freelance Piping jobs and project work? PeoplePerHour has you covered.
opportunity
Car gearbox issues following work
Had some work done to my gearbox on car with 2 sensors fitted as aftermarket product and software as original no longer avaialble. Car was OK for a few months. Then started jerking a few week ago 3 times. Took it to my local different garage as where I had work carried out is 70 miles away with company called AP. When at garage the gearbox stopped working. He pushed garage onto ramp and oil was coming out of it. It ended up being the gearbox oil where it was taken apart from initial garage AP. All oil had drained and this resulted in the sensors of gearbox being "locked" He showed me oil leak and initial work not carried out to a good standard as the pipe was leaking and seal damaged where initial garage AP carried out the works. He said will get a new pipe and calibrate the gearbox software as well as latest software updates Saturday 13th. On Monday 15th pipe replaced but software could not be updated a she said 3rd part part and only initial garage where part replaced could fix it. Cost me additional £600. So car was taken away by intial garage[AP] and on Friday 19th I phoned for an update and they said sensors working OK but car will not drive and that where I took the car to get the pipe fixed had "corrupted" the software. Told him no way possible as the software they are using had been used many times before on other cars, constantly updated, not 3rd party software, garage paid over £20k a year for licence from the main dealers as all linked to its mainframe HQ PORSCHE computer. He said a technician wil ring me. The car was pushed onto ramp as no gears were working and this was even before the software was plugged into the car. So what AP garage said was a total lie and placing the onus on my local garage. I phoned my local garage and told him everything and he was not happy. He said car should have left AP garage with calibration and software update and they did not seal the pipe properly hence the leak and software locking and car not going into gear so no gears and evident by car being pushed onto ramp He said ask AP to give his technician [Mark] a ring on Monday. I initially paid over £6k to get 2 sensors fitted to the car in October and it drove ok until a few week a go and even drove better after the work but there was an oil leak and I thought it was just from the engine as was evident before but was from the gearbox. Need this to go to legal if they refuse to claim liability.
13 days ago5 proposalsRemoteFarm landscape + house
I would like to make a master plan for a farm house / Istiraha including landscaping based on the requirement and details provided : 1. Land Details : • Land Number : 859 • Location : Almusanna • Village /Block :Wudam Al Ghaf • Type :Agriculture • SQM :17,197 • Permitted to Build : 500 SQM 2. Current state (Available) : • Boundary wall 620 running meter (Painted) • Guard House 30 SQM – Room , Toilet , Kitchen (In progress) • Electric room 3x4 (Ready) • Well water RO Filter Room 4x7 3. Note : • I would like to make a muster plan that can be built in phases not in one go • Master plan for the Istriaha • Full land landscaping for the 17,197 SQM to plan all areas based on the requirement • Full lighting and watering piping • Full walking areas around the farm & Istiraha . 4. Specifications for the Farmhouse and Retreat: • Master bedroom: 6x5 with a bathroom 3x3. • Girls' room: 5x5 with a bathroom 3x3. • Boys' room: 5x5 with a bathroom 3x3. • Parents' room: 5x5 with a bathroom 3x3. • Maids' room: 4x4 with a bathroom 3x2. • Men's majlis: 10x5 with a bathroom 3x3 and 3 sinks. • Family lounge: 7x5 with a shared bathroom 3x3 with 2 sinks and an open kitchen. • Storage room: 3x4. • Outdoor kitchen: 5x5. • Swimming pool: 6x4. • Pool equipment room. • Pool shower room. • Parking for 5 cars. • Car driveway to the house entrance for unloading. • sport room (table tennis, billiards, gym, TV gaming, baby foot, bilyard). • Small slaughterhouse. 5. Farm Specifications: • Agricultural equipment storage: 4x5. • Soccer field. • Volleyball court. • water fountains. • Children's play area. • Interlocking pathways around the farm for landscaping. • Barbecue areas. • Shaded areas. • Washing areas. • Animal and bird shelters. 6. Planting areas: • Gras Garden grass for party / Events • Grass for animals. • Vegetables. • Fruits. • Trees around the farm. • Greenhouse. Pricing is negotiable the suggested Vale is for place holding purpose
a month ago25 proposalsRemote
Past "Piping" Projects
Continue working on CAD from previous contract -
The present CAD expert has become rather popular and so is unavailable - I need to continue working on the CAD - Preferably an engineer background - Heat exchangers, pipes, pipe joints, etc.
Drawing for water main
we require a drawing produced for the proposed installation of a water main for new property There is no current drawing and will need to be produced from ordance survey map - also proposed detail of how the mains water pipe will be laid Please only people from the UK that understand regulations
Section view of a construction detail for a planning application
I need 2 sections drawn professionally, one showing a pipe between joists in a ceiling, the other showing the pipe boxed below the ceiling (you will need to flip the drawing I attached upside down for the second drawing). The one between the joists should be labeled "Dining room" and the one below the joists, "Kitchen". Thanks, Ross
Flappy bird project using green foot IDE and Java
Flappy bird greenfoot advanced The base idea of this project is to create a mobile-style game that allows the user to play as a bird (which you can customize at the start of the game) which must navigate through a series of pipes while maintaining momentum. The goal of the game is to get as far as possible without crashing into a pipe. Each pipe you go through will count as 1 point. The game is inspired by “Flappy bird”, however what makes my game different and better from flappy bird; is that you can customize your character before soaring through pipes which the original flappy bird does not provide. After the first 10 consecutive points the pipes start to move gradually, making it harder for the user to successfully go through the pipes without making contact with them which kills you. There will also be a little bird giving tips and tricks in the bottom right corner like a pet in a way after certain amount of points.
Company Logo
I need a Company Logo for my son who has a Plumbing Business. The name is Clarke's Plumbing & Heating Services and the logo required would use CPH letters but also reflect a plumbing theme (i.e. copper pipes as an example). can you help please? I used yourselves for my own business and I attach the invoice as I would appreciate a similar price for the new logo please?
11Pipers Logo
Looking for someone to design a mascot “11 pipers flower farm” (hobby farm) Looking for a mascot (geared around the 11 pipers piping Christmas song) thinking of a piper with flowers billowing out of the pipes? I grow a lot of dahlias but it could be any cool flowers.
A professional animated logo video for an intro to my YouTube
I'm looking for someone to create a high quality Animated logo design video for use at the start of my YouTube videos (Intro) & possibly a follow up separate logo for my production. I'm starting a channel based on all my outdoor adventures and know what I have in mind, My Nickname and channel name is SmilerTheGoat as I'm always smiling and always up the mountains, For the logo I'm wanting a Goat, not a whole goat but a portrait style, with human-ish features winking at you while smoking an old school pipe, with a pointy beard/longer pointed goatee, a stoner-esq look & red-ish eyes as if he had possibly smoked weed, with a happier demeanour possibly a slight smile In the background I would like mountains & possibly nature, related to the nature of the channel (The channel will consist of my personal videos up the mountains, having fun in the outdoors, out in the woods, long distance hiking, cycling, canoeing, with skits and jokes with my friends) I would like SmilerTheGoat written underneath the logo in lettering in the theme and style of the channel - Nature, Earthy, Stoner-esq colour wise the same, Nature, Earthy, Stoner-esq preferably brighter and vibrant (maybe like summer) but whatever would look better If this sounds like something that would interest you, I look forward to hearing from you Thanks STG I've attached a few sketches as Very rough ideas as a possible guide
I need to estimate cost and quantity of the building material
I need a Quantity Surveyor / Cost Estimator for a Residential construction scoping only to grey structure. I am constructing my own house. I have a plan designed with - Structure - Water - Electric I need to estimate the quantity required for constructing this house like - Bricks -- Red or Fly Ash - Cement/Lime Cement - Concrete - Steel - Pipings - Wires - Sockets etc. Everything that can help me estimate the construction cost of my house. I am also attaching the CAD file for it to review.
Sewing a Pyjama Top
I need a silk pyjama top (only top, no bottom) sewn. I have already cut out the patterns - they just need to be seen together with buttons,piping.
opportunity
Bathroom Design and visualisation
Hi all, Just to confirm... People without bathroom projects pictures will be declined, so I can narrow down my choice... I need bathroom design and 3D visualisation. The bathroom will be completely demolished including the wall that separate the wetroom with the utility room and all the walls will be drywalls. The design will be for 65+ age people, so all safety antislippery aspects needs to be considered. Overall sizes shown are accurate as it is at the moment, however after installing drywalls size will change slightly. Country where the bathroom will be made is Bulgaria, however even that wetroom are standard there, that won't be the case in this design. Only wet area to be considered - the shower cabin. The Design Must have: - Boiler installed horizontally as close to the ceiling as possible, covered by tiling ceiling at 45degrees. - Drywall ceiling with extraction above the shower room - electric heating to be considered - Washing machine and tumble dryer - Shower cabin - Sink and Mirror for all bathroom needs - Tiles to the floor, but some walls will be painted(or big mirror) to achieve lower overall price. Possible extras: - Additional toilet as shown (currently the toilet shown in the sketch is separate and too small) - drywall shelves to hide pipes - possible tumbledryer installed above the washing machine What I expect to see is: Design that doesn't show too futuristic bathroom designs, but more practical and realistic making it easy to implement. Colours to be chosen wisely so we can choose tiles that are very close to your design ( No guidance from me here) The design has to consider practicality, residents age, average budget STEP FILES WILL BE ATTACHED Sizes for Toilet, sink, boiler, shower cabin, washing machine and tumble dryer are estimated on the model. The wall circled with blue pen will be demolished. Any questions will be quickly answered and any additional information provided. Thank you very much for your time!
Business planning work
We are working with an entrepreneurial client who has ambitions to set up a manufacturing plant in the North of England that will produce rigid thermoplastic pipes (RTP) for the oil and gas industry globally. Our client is outstandingly creative but lack's the planning skills to produce a detailed business plan (its all in his head) and three year cashflow forecasts amongst several other plans required. We are looking for a competent, qualified individual who has some experience of producing business plans and that can start work in the next week or so.
Optimizing a gasifier
I am building a small scale gasifier and I want some amendments to the initial plan. I attach a short video. It was made in solidworks. I made a draft in tinkercad as it's easy for me to use and be able to demonstrate what I need. It is fabricated with threaded metal pipe fittings and no weld at all. There are also few stove pipe parts. The maximum space for construction is 1 mtrs long x 0.5 mtr wide x 1 mtr height I attach 2 video links of previous projects that I built but very basic constructions. https://www.youtube.com/shorts/z8NJ9JXX1Dc https://www.youtube.com/shorts/emNjlEmW9V4 So what is a gasifier? It's an incomplete combustion of biomass (wood, pellet, etc) that under high temperature and restricted oxygen, produces a flammable gas (syngas) that will be used to operate an internal combustion engine and particularly a generator. Please let me know if you are interested in this project and If you have a budget in mind. ( I would like unlimited revisions, until I am satisfied with the design) Time frame for completion is one week. Thank you
pre-funded
I need to estimate cost and quantity of the building material
I need a Quantity Surveyor / Cost Estimator for a Residential construction scoping only to grey structure. I am constructing my own house. I have a plan designed with - Structure - Water - Electric I need to estimate the quantity required for constructing this house like - Bricks -- Red or Fly Ash - Cement/Lime Cement - Concrete - Steel - Pipings - Wires - Sockets etc. Everything that can help me estimate the construction cost of my house. I am also attaching the CAD file for it to review.
Amendments to existing Mechanical Drawings on AutoCad
We have an urgent requirement to have existing mechanical engineering drawings ( pipe fittings & Valves) amended to our client requirements. The drawings are on our our clients template and the drawings would also need the revision updating We estimate that there is approximately one days work. Although this project is just one days work we regularly have a requirement for AutoCad experts so there would certainly be a regular flow of work in the future. Please let me know if you are interested in this work.
pre-funded
I need a power point slide fully editable
i need 2 power point slides of the image attached. make it look as realistic yet playful as possible. Each light in the image needs a brown and blue wire connected together. the 1st can be like the image, the 2nd needs each stick person touching the metal casing of the lights (please add a metal casing around each light :-)) also the water pipes need to be copper colour. Thanks in advance.
Loading plan
As an experienced professional, I'm looking to hire the best talent for a loading plan that involves loose pipes stacked in 40ft sea container. This plan is expected to take 6 days to complete. Moreover, I'm not sure if I need help with logistics or not, so I'm looking for someone who can offer their expertise and insights on the matter. i will provide all inputs, I have our current way of calculations in MX Excel. Now we need to automate so that any user can use this loading plan calculator. With the right person, I'm confident that I can get the best results, and I'm looking forward to seeing the results.
opportunity
Design of Gas Stripper (Pilot Plant)
Design of Gas Stripper (Vertical Vessel) 1/ Design of Vessel using PV-Elite 2/ Design of Piping System using Caesar II 3/ Design Steel Structural using Staad Pro 4/ ShopDrawings for Pressure Vessel using SolidWorks 5/ ShopDrawings for Piping using AutoCad 3D Plant 6/ ShopDrawings for Steel Structural using Tekla
opportunity
To design a sub frame and box for a MAN HX 60
1: Floor plan, layout, and box design • Do a few iterations on layout including technical details, legal limits, chassis clashes. etc. • Create provision space for electrical hardware, water, plumbing, large appliances, storage space. etc. • Include the base vehicle modifications in this stage (moving the spare wheel assembly, hydraulic tank, air filter, cab pump. etc.) • Run some studies such as weight distribution, thermal simulation, and • Create a 3D CAD model to help you visualise the layout, windows, internal aesthetic etc. 2b: Sub-frame • Either work with your sub-frame fabricator to understand where supports will be and where we can pass through the box • Or help you design your subframe to be assembled by a local fabrication shop • Lastly, we will create technical drawings for your chosen box manufacturer or panel cutter. 3: Detailed systems design • Create detailed schematics for your electrical, plumbing, and HVAC systems. • Create layouts for the hardware placement and cable/pipe/hose runs. • Optionally, create kit lists for you to include all hardware required. 4: Interior and furniture design • Turn the functional layout into a detailed plan including fixtures and fittings. • Create the necessary drawings for a carpenter or CNC machine cutting facility • Optionally provide assembly notes for this stage if required.