Freehand Drawing Projects

Floor Plan Idea under the Structural walls

HI I need rough ideas where i can place what if i give you a walls and open plan drawing, like where it is good to have a kitchen, possible location for living and guest room and wetroom and utility room. I will provide a boundary walls and inside walls drawing which cant change and need someone to give me 2 3 possible floor plan. Ideally where i can have 2 living and 1 guest room, wet room, kitchen, dining and utility. I do not need exact room size just lines will be fine and.

opportunity

Laser measuring Watford

We are needing somebody who can laser measure the outside of a building for us in Watford. This is a supermarket on the high street. Please could you confirm costs to measure 2 elevations (front/rear) and send us measurements as we need to produce some external elevation drawings for a planning application. Only respond if you are able to carry this out in person in Watford.

Tithe house basement

I confirm I need assistance with Tekla Structural Designer (TSD), not Tekla Structures or Tekla Tedds. I’m modelling a simple residential basement. I have the project drawings and key inputs, but I need support with the correct modelling approach and analysis setup in TSD (slabs/walls/support conditions, load application, combinations, soil/foundation assumptions as applicable). Expected output: support with model validation (checks that the model is set up correctly and behaves realistically), and guidance to obtain a clear, defined set of design outputs/results (governing cases, utilisation, reinforcement outputs and any key checks required for reporting). Thanks, Bopanna

Digital sewing patterns

My name is Anna Abou-Abdallah, and I am a fashion design student working on my end-of-year fashion collection. I am looking for help with digital pattern making only, based on my very clear technical drawings. I will be sewing the garments myself. What I need to get done: Digital sewing patterns created from my technical drawings Number of designs: 5 looks One size only (no grading required) Patterns for easy construction (student project) PDF patterns ready for printing (A4 or A0) This is a student project with a limited budget, so I am looking for a cost-effective solution. Could you please let me know: The price per pattern The total cost for 5 looks The estimated timeline The file format you provide (A4 / A0 / layered PDF) I would be happy to share my drawings and technical sketches once I hear from you. Thank you very much for your time. Best regards, Anna Abou-Abdallah

I need 3D desiger using solidworks software

We are seeking a proficient 3D designer with expertise in SolidWorks to assist in the development of innovative designs for our upcoming projects. The ideal candidate will possess a strong understanding of 3D modeling, simulation, and product visualization. Responsibilities include creating detailed 3D models, assemblies, and technical drawings, as well as collaborating with our engineering team to refine concepts. A keen eye for detail and creativity is essential. If you are passionate about design and possess a solid background in SolidWorks, we encourage you to submit your proposal for consideration.

Сreator UGC for TIKTOK

I am looking for creators who can produce content in any language. Preferably from South Korea, The Netherlands, Sweden, UK but not required. Creators from other countries also welcome :) An iPad and Apple Pencil are REQUIRED!! You can't work with us on Android. This is a long-term job, and it also includes a paid test assignment to assess your understanding and suitability. 2 short videos per day, you just need to shoot the process of drawing. I will send more info if you are interested and want to start!

I need advice about using Affiliate Marketing

Hello, in the past, I had a website where all the products were affiliate links and I used to earn from it. (This was just a little sideline business to my main work at the time, but it did make quite good passive income using Amazon and a few other affiliate programmes). I had a friend who uses to do our SEO for free plus I got some PR on it myself which helped to draw traffic. I would like to get back into this, as with over 25 years experience in Retail I have the ability to curate collections of bestselling products and know what will sell well. I need advice as to how I do this best and at as little investment as possible. A website? Shopify? Pinterest? Instagram? Which is easiest? I would like to just stick with Amazon at this stage. I have a theme/niche that I would like to specialise in which I will keep private. But if you could give me some advice, or if indeed there is anyone who could help set this up for me and shoe me how and where to drop links etc. I'm very rusty on this- I have the "selecting products and branding capabilities" but not the tech side of things. Obviously if you can and are chosen to help me to set up, I will book that as another job, this first one is just to discuss. Ps. You see many Instagram posts regarding "side-hustles" for busy Mums, where they are simply working with affiliate links to generate income. Do these really work? Like I say, this is just a side hustle to my normal work just because I know that I have a skill that I may aswell put to use, plus I really enjoy it and it generated income in the past. I realise the landscape has changed however, so how can I still do this, whilst moving with the times to make it a success? Thank you Joanne

Structural Engineer

I am looking for an experienced Structural Engineer familiar with UK Building Regulations to support residential projects including single storey extensions, double storey extensions, and loft conversions. The role involves producing structural calculations and drawings suitable for Building Control approval, including beam sizing, load calculations, foundation assessments, and roof alterations. You must have proven experience with UK residential projects and be confident working with Building Control requirements. Good communication and reliable turnaround times are essential. Ongoing work available for the right candidate. Please include examples of previous work, your typical turnaround time, and your pricing structure when applying.

Convert hand drawn plans to CAD

We are seeking a proficient CAD designer to transform hand-drawn house plans into precise CAD drawings, providing a DWG file that includes detailed elevations and sections. The project will involve implementing minor interior modifications and corrections to the original plans. Additionally, each page must be formatted with title blocks, and comprehensive door and window schedules should be incorporated. It is essential that the final output adheres to Imperial/US standard measurements, as this will be utilized for a planning application in the US market.

DWG to Archicad

I am seeking a skilled professional to convert a DWG drawing into an ArchiCAD file, along with the creation of a 3D model. The project requires meticulous attention to detail to ensure that all architectural elements are accurately represented in the ArchiCAD environment. The ideal candidate will possess extensive experience with both DWG and ArchiCAD software, ensuring a seamless transition from 2D to 3D. Please provide examples of previous work and an estimated timeline for completion. Your expertise will be invaluable in bringing this project to fruition.

'Where's Wally' style YouTube thumbnail design required

I am looking for a talented illustrator to create a captivating "Where's Wally"- style YouTube thumbnail. The ideal candidate will transform a hand-drawn sketch into a vibrant, intricate illustration that invites viewers to explore and discover hidden details. This project demands exceptional drawing abilities, featuring numerous small characters and scenes with clean, legible line work and a thoughtfully curated color palette. The final deliverable should be a 1280 × 720 px PNG file, accompanied by the source file. I have attached a rough sketch of the design to give you an idea of the detail involved.

A 'Where's Wally' style YouTube thumbnail design

I am seeking a talented illustrator to transform a hand-drawn sketch into a vibrant, intricately detailed YouTube thumbnail inspired by the "Where's Wally" concept. This project demands exceptional drawing skills and a flair for creating visually dense compositions that encourage viewers to explore and discover hidden elements. The final illustration should feature numerous small characters and scenes, with a playful tone. The deliverables include a full-color image sized at 1280 × 720 px, in PNG format, along with the source file. I have attached a rough sketch to give you an idea of the detail involved.

Freelance Womenswear Fashion / Technical Designer

I’m looking for a freelance womenswear fashion designer or technical designer to help translate my design ideas into clear, factory-ready tech packs. This is a short, defined project to start, with potential for ongoing work as the brand develops. Project Scope Create 4 womenswear designs- one is the same design different fabric Translate my concepts into: Flat drawings (front & back) Basic but clear tech packs suitable for manufacturing These designs will be used for sampling and small-batch production with manufacturers in China What I Will Provide Written descriptions of each design- looking for someone who is happy to discuss each design on zoom/phone Reference images / inspiration (e.g. Pinterest or similar) Guidance on: Target customer Desired fit (relaxed / tailored / structured) Fabric ideas (e.g. silk, cotton, viscose, etc.) What I’m Looking For Please apply only if you have experience with apparel production. Required: Experience in womenswear fashion design Experience creating tech packs for factories Understanding of garment construction (seams, linings, closures, etc.) Ability to produce clear, simple flats (not just artistic illustrations) Comfortable working with startup / small brands Ideal (but not essential): Background as a technical designer or garment technologist Experience working with overseas manufacturers Familiarity with small-batch or low-MOQ production Deliverables For each of the 4 styles: Flat drawings (front & back) Basic tech pack including: Construction notes Fabric & trim notes Measurement guidance (can be approximate at this stage) Files delivered as PDF (editable format preferred if possible) Budget Open to discussion — please include: Your price per style or for the full project What level of detail is included at that price How to Apply Please include: A short introduction Examples of womenswear flats or tech packs you’ve created Briefly explain your experience working with manufacturers or production teams Notes This project is for initial sampling, not final production perfection Clear communication and practical production knowledge are more important than high-fashion illustration There may be ongoing work for the right person Thank you — I look forward to hearing from you.

opportunity

Clean rebuild of working 3D prototype into production-ready CAD

I’m looking for an experienced CAD engineer or product designer to take my existing 3D design files and rebuild them properly from scratch, ready for production in metal. Background • I designed all parts myself and have already validated the functionality by 3D printing and physical testing • Everything works, but the CAD files are crude and not production-ready • Tolerances are largely guesswork • Parts were developed iteratively by adding and removing features, so many models are a hodgepodge rather than clean parametric designs What I need • Recreate all parts cleanly in a professional CAD system • Apply sensible, engineering-grade tolerances suitable for CNC machining in aluminium • Produce fully constrained, parametric models • Assemble parts where appropriate to check fit and function • Deliver clean STEP (STP) files suitable for manufacture Workflow • I would want to 3D print the rebuilt parts first to validate everything before committing to metal • Expect some iteration after first review/print • I can supply existing STL/STEP files, photos, and functional explanations Ideal candidate • Strong mechanical CAD experience (SolidWorks, Fusion 360, Inventor, Creo, or similar) • Comfortable designing for CNC machining in aluminium • Able to think like an engineer, not just redraw geometry • Experience rebuilding rough prototypes into production-ready designs Please reply with • Brief overview of your relevant experience • CAD software used • Examples of similar “prototype to production” work This is a serious engineering tidy-up rather than a simple file conversion, and I’m looking for someone who enjoys turning working prototypes into elegant, manufacturable designs. Next steps Once I’ve reviewed responses and shortlisted suitable candidates, I will ask for a simple NDA to be signed before sharing any detailed files, drawings, or samples.

Logo design for Magma Films

We are seeking a talented graphic designer to create a logo for Magma Films, Magma Productions, and Magma Entertainment. The design should draw inspiration from the Pictorion Magma Animation logo while omitting the "PICTORION" text and eye symbol from Das Werk. Retain the MAGMA text's style, size, and positioning, substituting "ANIMATION" with FILMS, PRODUCTIONS, or ENTERTAINMENT. Incorporate a blue organic shape with a gray drop shadow, utilizing a vibrant color palette of blue, purple, pink, red, lime green, orange, yellow, cyan, black, gray, white, and beige. The final deliverables will include 12 color variations and 19 logo variations at resolutions of 19, 38, 57, 76, and 95, provided in PNG and JPG formats without watermarks. A detailed color documentation (HEX / RGB / CMYK / Pantone values) will accompany the final PDF delivery.

Goodnotes templates

Hi all I’m looking for a custom GoodNotes template designed specifically for my role as Technical BDM at Guardian Electrical. To be used on an iPad pro with pencil I need a meeting notes template that ensures I consistently capture all critical information on every site/customer visit — and that nothing gets missed. ⭐ Template Requirements (Must Include) Header Section • Customer Name: __________________________ • Site Address: ____________________________ • Date: ____________ • Contact Name + Number: __________________ • Meeting Type: (Site Visit / Survey / Quote / Follow-up) ⸻ ✅ Site / Technical Checklist Section (Yes/No + Notes) Please format this section as a structured checklist with Yes / No toggles (or tick boxes) plus space for quick notes where required. 1) Asbestos • ☐ Yes ☐ No • If Yes → additional notes box appears (or is included under it) 2) Access for Site (Arrival) • Notes box included (parking / permits / security / entry info) 3) Isolation of Equipment • Notes box included (who isolates / when / responsibility / restrictions) 4) High Level Equipment • ☐ Yes ☐ No • If Yes → “Type of access equipment required” field: • ⸻ 5) Busbars • ☐ Yes ☐ No 6) London (or similar requirements) • ☐ Yes ☐ No 7) Lodge • ☐ Yes ☐ No ⸻ ✅ Equipment / Circuit Breakdown (Yes/No + Quantity) Please include a grid/table layout with Yes / No + “How many?” for each: • SP Circuits (SP ccts) ☐ Yes ☐ No | Qty: ____ • TP Circuits (TP ccts) ☐ Yes ☐ No | Qty: ____ • SP DBs ☐ Yes ☐ No | Qty: ____ • TP DBs ☐ Yes ☐ No | Qty: ____ • Panelboards ☐ Yes ☐ No | Qty: ____ • BB ☐ Yes ☐ No | Qty: ____ • EVSE ☐ Yes ☐ No | Qty: ____ • EET ☐ Yes ☐ No | Qty: ____ ⸻ ✅ Documentation / Drawings Section • Comprehensive Drawings • ☐ Yes ☐ No ☐ Other (specify): ________________ ⸻ ✅ Risk / Compliance Section • Panel Risk Assessments • ☐ Yes ☐ No ⸻ ✅ Additional Scope / Notes Sections Please include note-taking spaces for: Remedials • Large notes box EML • ☐ Yes ☐ No • Notes box (optional) ⸻

opportunity

We are preparing to build a Data Center Construction Intelligence Platform. Before development begins, we need an initial, authoritative dataset covering previously built and currently active data center construction projects in the U.S. This dataset will be the foundation of a platform that is designed to update monthly over time. This role is research and data structuring only — no application development, no scraping tools, and no automation required. Data Sources (Representative, Not Exhaustive) Research should be based on reputable industry sources, such as: BuilderConnected Dodge Construction Network CRANE Construction Intelligence Public owner / developer disclosures Industry reports and trade publications Publicly available permitting and project announcements ⚠️ Important: You are not required to have paid access to all platforms. We are looking for structured summaries and metadata, not proprietary dumps. Scope of Work 1️⃣ Data Center Project Inventory Compile structured information on: Previously built data centers Currently active / under-construction data centers Where available, capture: Location (city, state) Project status (completed / active) Facility type (enterprise, hyperscale, colocation, edge, etc.) Approximate scale (high-level) General delivery model (design-build, CM, etc.) 2️⃣ Construction Systems & Assemblies (Project-Informed) Using real-world project data, organize: Structural systems Electrical & power infrastructure Mechanical / cooling strategies Fire protection approaches Low-voltage & networking considerations Focus on patterns and common approaches, not engineering drawings. 3️⃣ Tier-Level & Redundancy Context (High Level) Where identifiable, note: Tier I–IV alignment (if stated or implied) Redundancy concepts (N, N+1, 2N, etc.) How redundancy impacts construction scope This should remain descriptive, not technical design. 4️⃣ Cost & Schedule Drivers (Qualitative) Based on project patterns, identify: Primary cost drivers Schedule risk factors Regional labor/material sensitivity Supply chain and lead-time influences No exact pricing required. 5️⃣ Structured, App-Ready Data Format (Critical) All information must be delivered in structured spreadsheet format, with clearly defined columns such as: project_name location project_status facility_type system_category assembly_or_component tier_or_redundancy_level primary_cost_drivers schedule_risk_factors data_source notes This dataset will later feed an application and AI system. Deliverables You must provide: Google Sheets or Excel file(s) Clean, consistent structure and naming CSV export Short summary document explaining: Data sources used Assumptions and limitations Recommendations for monthly updates No PDFs. No slide decks. No scraped raw dumps. Ongoing Monthly Updates (Future Work) After the initial dataset is delivered, we plan to: Update the dataset monthly Add newly announced or completed projects Refine patterns as the dataset grows Please indicate in your proposal: Whether you are open to a monthly update engagement Your estimated monthly fee range for ongoing updates Ideal Candidate Experience with construction, infrastructure, or industrial research Familiarity with construction intelligence platforms or trade data Strong data organization skills Methodical, detail-oriented approach Comfortable citing and tracking data sources Screening Question (Required) How would you gather and structure authoritative construction project data so it can be updated monthly and later used in an application or AI system? Generic responses will not be considered.Selection Criteria We will prioritize candidates who: Demonstrate structured thinking Understand construction project data Respect data-source boundaries and licensing Clearly explain how they will organize and maintain the dataset