Cad Jewellery Designer Projects

I need a CAD design for a small Raspberry PI device

Hi, I need a CAD design in Autodesk Fusion for a small Raspberry PI device. It will be very simple and similar to the attached. Inside the case there will be a screen, motherboard, soundcard, amp and speakers. I will send a sketch of all sides with measurements. If you could send me examples of similar cad designs in your proposals. Thanks, Steven

CAD Expert for Tubular Steel Frame (Disability/Mobility Device)

I'm looking for a CAD designer to turn a colour‑coded reference image into a manufacturing‑ready tubular steel frame for a rugged disability/mobility device designed for use in East Africa. The work includes creating a 3D CAD model (SolidWorks or Fusion 360) and 2D drawings with full dimensions, tube specifications (OD, wall thickness, bend radii), and precise bolt‑lock joint designs. Specifically seeking someone with experience designing mechanical locking joints and bolted structural connections, rather than welded assemblies. Will provide the reference image, initial dimensions, material (steel), and key functional requirements. The final deliverable should be a complete CAD + drawing package ready for fabrication quotes in China and East Africa. Please share examples of similar frame or joint‑design work and your estimated timeline.

Drainage Layout Drawing Amendments - CAD

I am seeking a quotation for the amendment and reissue of an existing drainage layout drawing relating to a planning condition discharge submission for a mixed-use conversion project at: 95 High Street Chelmsford CM1 1DX Background A drainage layout drawing has already been prepared and submitted to the drainage officer (Essex County Council / LLFA). Following review, the drainage officer has requested a small number of amendments before the drainage strategy can be accepted. The drainage principle itself has already been agreed and no redesign is required. Scope Required I require the existing drainage layout drawing to be amended and reissued in PDF format incorporating the following: • Clearly show separate foul and surface water systems throughout • Clearly show foul drainage discharging to the public foul sewer (FW) • Clearly show surface water drainage discharging to the public surface water sewer (SW) • Remove any implication that foul and surface water connect into a combined lateral drain before reaching the public network • Add annotation confirming surface water discharge will be restricted to 2.0 litres per second • Update notes and key accordingly • Retain existing architectural floor plans and existing drainage routes where possible Information Available I can provide: • Existing drainage layout drawing (PDF) • Approved floor plans • Drainage officer comments • Mark-up instructions • Site photographs and location information if required Deliverables • Revised drainage layout drawing (PDF) • Submission-ready version suitable for issue to Essex County Council drainage officer

Garden Design

Seeking an experienced garden designer to create detailed designs and technical drawings for ongoing projects. I run a UK landscaping company and require imaginative, practical plans that reflect site constraints, client briefs and sustainable planting schemes. Deliverables include concept sketches, planting plans, hardscape layouts and construction-ready CAD or vector files. Strong communication, timely delivery and ability to collaborate with contractors are essential. Prior portfolio and UK-relevant experience preferred. Competitive ongoing work for the right candidate.

Freelance Structural CAD Support

UK structural inspection and investigation firm seeks freelance Structural CAD support to augment our in‑house team during a busy period. Responsibilities include producing accurate CAD drawings from site data, revising existing plans, and ensuring compliance with UK standards. Ideal candidate will have strong technical drafting skills, experience with structural details, proficiency in AutoCAD or similar, attention to detail, and reliable delivery. Engagement offered outside IR35 for SME collaboration.

CAD Designer consumer product - 3d model & engineering drawings

Hi, I'm looking for a CAD designer to create a 3D model and engineering drawings for a physical product - a modular shoe lift attachment (similar to the EvenUp shoe balancer). I have a concept image and full technical specification document ready to share. What I need delivered: - 3D model in .STEP format - Engineering drawings in PDF with critical dimension callouts, material callouts, and a basic assembly drawing showing how all components fit together Reference size is UK 8. Main materials are rigid TPU/plastic, flexible TPU, and EVA foam. Please only get in touch if you have experience with physical consumer products involving plastic or TPU components. Thanks

House layout changes in Autocad

Hi I have a house being built but I had to change the layout and a few other items. I need a person who knows autocad and can adjust the dwg to the new layout. I can send photos of all the changes and I have the CAD file. The following is the main work: a new window was installed in the kitchen adjacent to the boundary. b.Removal of the hot water cylinder from the store on the first floor. c. Show the enlarged bathroom on the first floor, omitted storage, and enlarged landing. d. Show the installed attic hatch in bedroom 2.

opportunity

CNC Controller Schematic/Design

CNC Mill Controller Electrical Design Consultant Project Overview I am looking to design and build a custom CNC milling machine and am looking for an experienced electrical engineer or controls architect with experience in CNC systems, machine control, and automation. I'm looking for an expert who can help me plan and validate the overall electrical architecture before I commit to a particular design direction. Scope of Work The initial objective is to work together to define the machine's electrical system, including: - Overall controller architecture. - Motion control strategy (servo/stepper integration). - Motor drives and power distribution. - Safety systems (E-stop chain, contactors, interlocks, limit switches). - I/O allocation and expansion. - Spindle and auxiliary equipment integration. - Enclosure layout and wiring philosophy. - EMC/noise mitigation and grounding strategy. - Recommendations for suitable components and industry best practices. Once the architecture is agreed upon, I would like the successful freelancer to produce: - A complete electrical schematic. - Wiring diagrams where appropriate. - A basic bill of materials (BOM). - Documentation sufficient for machine assembly. Ideal Candidate I'm looking for someone with experience in one or more of the following: - CNC machine design or retrofit projects. - Industrial automation and machine control. - PLCs, motion controllers, or PC-based CNC platforms (Mach4, LinuxCNC, Centroid Acorn, etc.). - Servo and stepper drive systems. - Electrical CAD packages such as AutoCAD Electrical, EPLAN, SolidWorks Electrical, or similar. Practical, real-world experience designing industrial machinery is preferred over purely academic electrical engineering experience. About the Project This is a custom hobby/small scale manufacture machine, but I want to approach the electrical design using professional engineering practices. I already have a general concept for the mechanical side and would like to collaborate on the electrical design before purchasing major components. Please include examples of previous CNC, machine control, or industrial automation projects you've worked on, where possible. Price is negotiable.

Label Design

Design a polished label set by replicating the provided artwork and delivering four distinct flavor variants. Recreate the layout, typography, color palette, and graphic elements with precision, adapting each variant consistently while ensuring legible ingredient and regulatory text. Supply high-resolution print-ready files in commonly used formats, with color profiles and bleed settings for production. Demonstrate attention to alignment, spacing, and scalability so each label maintains visual harmony across sizes and materials.

opportunity

Creation of cad drawings for existing elevations on a building

Seeking an experienced draughtsperson to produce precise CAD elevations of an existing building. Floor plans are provided; you will draft accurate exterior elevations to verified scale, deliverable in DWG and PDF formats. Require meticulous attention to measured dimensions, clear linework, layer organization, and adherence to standard drafting conventions. Prior experience with measured surveys and architectural detailing preferred. Timely delivery and quality assurance essential. Building will need to be measured or scaled from the floor plans

Re design of a town house

Hi indeed to rework an exterior design of a building keeping size and engineering design exact same

Social Media Design

We are seeking a creative and experienced Graphic Designer to design and develop professional social media branding for 10 different brands operating in the laboratory, scientific, medical, biotechnology, analytical, and industrial equipment sectors.

Logo and Banner Design

We are looking for a creative and experienced graphic designer to design 10 professional logos and website banners for our portfolio of scientific laboratory equipment brands

Residential HVAC Design Engineer (Ongoing Work)

We are looking for experienced residential HVAC design engineers who regularly perform load calculations, equipment selection, and duct design for U.S. residential projects. We are currently evaluating long-term partnerships for a growing pipeline of residential HVAC design work and would like to understand typical workflows, turnaround times, pricing, and deliverables from experienced professionals in the industry. Scope of Work For an initial project, we need a complete HVAC design package for a 5-bedroom single-family residence, including: Manual J load calculations Manual S equipment selection Manual D duct design Room-by-room airflow calculations Supply and return layout Register and grille sizing Equipment schedule Duct fabrication details Bill of materials Installation notes Deliverables Load calculation report Equipment sizing documentation HVAC design drawings (PDF) CAD files (preferred) Duct layouts and fabrication details Material takeoff / bill of materials What We'd Like to Learn Please include: Your typical turnaround time Your pricing model (per project or hourly) Software used (Wrightsoft, Elite, CoolCalc, AutoCAD, Revit, etc.) Number of residential HVAC designs completed Whether you work directly with contractors or homeowners Ideal Candidate Strong experience with U.S. residential HVAC systems Familiarity with ACCA Manual J, S, and D methodologies Experience delivering fabrication-ready duct designs Previous work with HVAC contractors preferred This may lead to recurring work for the right candidate.

opportunity

Complete a BRE Daylight assessment on a 1 bed cellar conversion

Please only apply if you have completed the assessment and have a succesful related planning application. Fee is PPH generated so ignore. I require a a BRE Daylight assessment on a 1 bed cellar conversion in an existing property. The 3D file and CAD drawings are available. Please send copy of the report you have completed.

opportunity

Tshirt and clothing designs

I am looking for a designer who can create a number of different designs for t-shirts and other clothing items for an apparel section i am adding to my current business. Brand inspiration is, www.youngLA.com and www.chosenfewathletics.com

opportunity

Detailed 2D Construction Drawings

OVERVIEW I'm seeking a meticulous and experienced CAD Drafter/Technician to produce a complete set of accurate 2D construction drawings for a house extension project. You will be converting approved 3D perspective drawings (provided in PDF format) into fully detailed, submission-ready, or construction-ready 2D technical drawings. The ideal freelancer must have a strong background in building construction, architectural drafting, and basic building services (M&E). SCOPE OF WORK The selected freelancer will be responsible for drafting: 1. 2D Construction Drawings: Complete architectural drawings, Mechanical & Electrical services, small portions of structural extension details matching the existing structure and the like. 2. External Works: Drafting of external site elements, including boundary fences, ancillary buildings, drainage layouts, associated site works and the like. 3. Details: Inclusion of typical construction details, sections, callouts and the like. 4. Design Alignment: Ensuring all 2D construction drawings strictly reflect and align with the approved 3D perspective drawings (provided in PDF). 5. Full plan drawings (draft), with approximately 80% of the dimensions already specified, will also be provided. 6. You will be provided with a set of sample drawings. These drawings will serve as references, and the new drawings shall follow the same format, including fonts, dimensioning, title blocks, and drawing styles to comply with the local submission office, and tradesman. THE HOUSE 1. A 2-storey residential 2. ~4500 sq.ft TECHNICAL REQUIREMENTS 1. Strict Accuracy: All dimensions must be highly accurate and drawn precisely to scale. 2. Deliverable Formats: Final files must be delivered in both .dwg and .dxf formats. Clean layer management and standard pen weights, colors are expected. REQUIREMENTS 1. Proven experience in architectural/construction drafting (please provide portfolio samples of similar construction sets). 2. Proficiency in AutoCAD or compatible CAD software capable of native .dwg/.dxf export. 3. Strong understanding of building construction technology. 4. Excellent attention to detail—ability to interpret 3D PDFs and accurately translate them into 2D technical and construction drawings. Please Provide: 1. A brief summary of your drafting experience, particularly with extension projects or new house. 2. Portions of past construction drawing sets you have produced (Architectural/M&E/External works). 3. Your estimated timeline for a project of this nature. 4. Your preferred rate (fixed price). 5. Delivery date (expecting 1-2 weeks)

opportunity

Web Designer Needed

Replicate Existing Website Design for Small 3-4 Page German Site I'm looking for an experienced web designer to replicate the look, feel, and artwork of our existing website onto a new 3-4 page German-language website. **What's already done – this is a straightforward job:** - Full design exists on our current website (you'll be given the URL), however, we don't want the German website to be as complex, just the information about one of our courses with some supporting photos. - All pages have already been translated into German and contain: course page with info and pricing, faculty page (a straight copy but with a few addition German biographies and photos of faculty in German), and an application page to apply (straight copy but with only one course) - No creative design work required – this is a replication task **What I need you to do:** - Build a clean 3-4 page website that mirrors the visual style, layout, and branding of our existing site - Apply the pre-translated German content to each page - Ensure the site is mobile-responsive and works across major browsers - Deliver a site that is ready to go live. We have the domain, we just need the work done to get it live. We use Webflow with our current site. Please provide a set price.

Professional Brochure Design for Wrapsmiths

Experienced designer sought to craft a premium brochure for Wrapsmiths, a family-run North Yorkshire specialist in motorhome, caravan and campervan transformations. The brochure must adhere to supplied brand guidelines, feel premium yet friendly, showcase strong before-and-after imagery, include repeatable case study templates, services overview, benefits of wrapping versus replacing, testimonials and a compelling call to action. Deliverables: print-ready and digital PDFs, editable Canva preferred, and source files. Provide relevant portfolio examples.

Tea sticker design

Hi I have design already Just need to do some artwork with information Front sticker around 20 options Behind 30 options