Phoenix - Your AI AssistantFreelance Solidworks Jobs
Looking for freelance Solidworks jobs and project work? PeoplePerHour has you covered.
opportunity
SolidWorks 3D model from ship blueprints (PDF) → laser-cut
Experience Level: Expert Estimated project duration: 3 - 4 weeks I need an experienced SolidWorks CAD designer to recreate an 86m inland vessel (scale 1:60) from scanned PDF shipyard drawings, including the hull lines plan. Goal: produce a laser-cut plywood model kit (tabs/slots) with a frame/bulkhead hull structure for accurate hull shape. Outer appearance should be realistic; internal structure should be strong. The model will become RC, so include space for battery/components (rough layout is enough). Required Output • SolidWorks Parts (.SLDPRT) for all components • SolidWorks Assemblies (.SLDASM) with logical sub-assemblies • 2D DXF exports (laser-cut ready) for all wooden parts • Part numbering for laser engraving (to prevent build mistakes) Critical Requirements • Hull frames match the lines plan accurately • Parametric thickness control: • Longitudinal spine thickness adjustable • All cross frames thickness adjustable via one parameter • All slots update automatically • Must be done in milestones with 3–4 review checkpoints for feedback SolidWorks for “professional use” or “for makers” is fine either way. Read-check (mandatory): How many years of SolidWorks experience do you have, and do you have experience with wooden kits OR ship drawings/lines plans? Create a super simple example (in Solid Works) based on the line plan in the attachment. Do this for 3 or 4 frames and then add the skin over them. Add the assembly and parts to your offer. If this is not done, I will not consider your proposal. A few drawings have been added as examples. The rest will be shared once the assignment has been finalized.
I need 3D desiger using solidworks software
We are seeking a proficient 3D designer with expertise in SolidWorks to assist in the development of innovative designs for our upcoming projects. The ideal candidate will possess a strong understanding of 3D modeling, simulation, and product visualization. Responsibilities include creating detailed 3D models, assemblies, and technical drawings, as well as collaborating with our engineering team to refine concepts. A keen eye for detail and creativity is essential. If you are passionate about design and possess a solid background in SolidWorks, we encourage you to submit your proposal for consideration.
opportunity
Clean rebuild of working 3D prototype into production-ready CAD
I’m looking for an experienced CAD engineer or product designer to take my existing 3D design files and rebuild them properly from scratch, ready for production in metal. Background • I designed all parts myself and have already validated the functionality by 3D printing and physical testing • Everything works, but the CAD files are crude and not production-ready • Tolerances are largely guesswork • Parts were developed iteratively by adding and removing features, so many models are a hodgepodge rather than clean parametric designs What I need • Recreate all parts cleanly in a professional CAD system • Apply sensible, engineering-grade tolerances suitable for CNC machining in aluminium • Produce fully constrained, parametric models • Assemble parts where appropriate to check fit and function • Deliver clean STEP (STP) files suitable for manufacture Workflow • I would want to 3D print the rebuilt parts first to validate everything before committing to metal • Expect some iteration after first review/print • I can supply existing STL/STEP files, photos, and functional explanations Ideal candidate • Strong mechanical CAD experience (SolidWorks, Fusion 360, Inventor, Creo, or similar) • Comfortable designing for CNC machining in aluminium • Able to think like an engineer, not just redraw geometry • Experience rebuilding rough prototypes into production-ready designs Please reply with • Brief overview of your relevant experience • CAD software used • Examples of similar “prototype to production” work This is a serious engineering tidy-up rather than a simple file conversion, and I’m looking for someone who enjoys turning working prototypes into elegant, manufacturable designs. Next steps Once I’ve reviewed responses and shortlisted suitable candidates, I will ask for a simple NDA to be signed before sharing any detailed files, drawings, or samples.
ESP32 Embedded Firmware – Smooth Sparkler LED Animation
I am developing a wearable LED headband with a continuous, sparkler-style moving light effect. The mechanical design (SolidWorks / STEP) is fully completed and locked. This project is strictly focused on electronics and embedded firmware — no mechanical design, web, or mobile work. The goal is to implement a high-quality LED animation engine on a microcontroller (ESP32 or equivalent) that produces smooth, continuous motion around a 360° addressable LED ring (~72 LEDs). The animation must use fractional (sub-pixel) position tracking and brightness blending across adjacent LEDs — visible LED-to-LED stepping is not acceptable. Scope of Work: • Develop embedded C/C++ firmware for addressable LEDs (WS2812B / SK6812 or equivalent) • Implement continuous 360° motion with one or more moving “sparks” • Use floating-point or fixed-point math to blend brightness between adjacent LEDs • Create smooth trailing glow and subtle flicker (sparkler-style behavior) • Match motion speed and feel to provided reference visuals • Ensure clean, efficient, well-commented firmware suitable for manufacturing Deliverables: • Firmware source code • Short demo video showing slowed-down motion that clearly demonstrates sub-pixel interpolation • Brief explanation of animation logic and LED indexing • Optional: guidance on MCU/LED selection if needed Out of Scope: • Mechanical CAD • PCB layout • Mobile apps or cloud connectivity This project requires experience with embedded systems, microcontroller programming, and addressable LED animation. Please do not apply if your background is primarily web or mobile development.
opportunity
CAD / CNC Specialist – Tube Slide Pattern Development
We’re looking for an experienced CAD / CNC specialist to work with us on developing accurate cutting patterns for tube slide sections that will be machined on our Mantech CNC flatbed router (specs and machine info attached). This is not a one-off file handover – we’re looking for someone who can work collaboratively with our in-house team via Doncaster, helping us build confidence that our machinery, setup, and workflow are optimised and production-ready. The first project may involve hands on work in Doncaster. The Project We design and manufacture tube slide components that are formed from CNC-cut patterns, primarily using MDF, model board or polystyrene. These parts are then assembled into smooth, continuous slide sections, so accuracy, fit, and repeatability are critical. You’ll help us: - Convert 3D geometry into flattened, CNC-ready cutting patterns - Optimise layouts for material efficiency and clean assembly - Ensure compatibility with our Mantech CNC machine and tooling - Validate tolerances, joints, and seam alignment for real-world fabrication What We’re Looking For - Strong experience in CAD to CNC workflows (Fusion 360, SolidWorks, Rhino, or similar) - Proven understanding of flattening curved or cylindrical geometry into manufacturable patterns - Hands-on knowledge of CNC routing for MDF / model board / sheet materials - Comfortable collaborating via Doncaster or similar technical review platforms - Able to advise on feeds, tooling strategy, and machining best practices What Success Looks Like - Clean, reliable pattern files that cut accurately on our machine - Clear documentation and guidance for our operators - Confidence that our internal team can repeat and scale production independently Nice to Have - Experience with composites, laminated assemblies, or formed sheet structures - Background in play equipment, slides, architectural fabrication, or complex curved assemblies How to Apply Please share: - Examples of similar CAD/CNC pattern or flattening work - Your preferred CAD/CAM software - A brief overview of how you typically collaborate with production teams This is an opportunity to become a long-term technical partner, not just a freelancer on a single task.
Past "Solidworks" Projects
opportunity
SolidWorks 3D model from ship blueprints (PDF) → laser-cut
I need an experienced SolidWorks CAD designer to recreate an 86m inland vessel (scale 1:60) from scanned PDF shipyard drawings, including the hull lines plan. Goal: produce a laser-cut plywood model kit (tabs/slots) with a frame/bulkhead hull structure for accurate hull shape. Outer appearance should be realistic; internal structure should be strong. The model will become RC, so include space for battery/components (rough layout is enough). Required Output • SolidWorks Parts (.SLDPRT) for all components • SolidWorks Assemblies (.SLDASM) with logical sub-assemblies • 2D DXF exports (laser-cut ready) for all wooden parts • Part numbering for laser engraving (to prevent build mistakes) Critical Requirements • Hull frames match the lines plan accurately • Parametric thickness control: • Longitudinal spine thickness adjustable • All cross frames thickness adjustable via one parameter • All slots update automatically • Must be done in milestones with 3–4 review checkpoints for feedback Read-check (mandatory): How many years of SolidWorks experience do you have, and do you have experience with wooden kits OR ship drawings/lines plans? Include 1–3 relevant examples. A few drawings have been added as examples. The rest will be shared once the assignment has been finalized.
FEA Analysis
I am in need of an expert in Finite Element Analysis (FEA) to conduct an in-depth analysis of various components designed in SolidWorks. The ideal candidate will possess extensive experience in performing simulations to evaluate structural integrity, stress distribution, and potential failure points under different loading conditions. Deliverables should include comprehensive reports detailing findings, visualizations of stress and strain distributions, and recommendations for design improvements. Proficiency in SolidWorks and a solid understanding of engineering principles are essential for this project.
Point cloud to
Looking for assistance with converting an interior lazer scan to a 3d model and a few over all 2d CAD drawings. For this project I need the point cloud turned in to a simple model. Walls, floors, HVAC, electrical, and the other infrastructure picked up in reasonable accuracy. As for the boat in the middle of the dry dock, I just need the outside of the hull, the supports are not important, but would be nice if you think they can be done quick. Omit any of the art, furniture or information panels. I can provide site videos and photos if you need reference that isn't in the scan. As for the software and drawings. The Architect likes to use sketch-up and we like to use more Engineering friendly software (civil 3d, bricscad, Solidworks, Onshape, etc). We are primarily focused on the 3D model since we need it for adding in the structure and the HVAC and energy analysis, so I think a universal format would be best unless you have some suggestions. Any of the 2D drawings are very high level and simple. Here is the link for the project point cloud (still pretty messy but the bulk is there) files I have included a .rcp & .e57. https://drive.google.com/drive/folders/116lN9uwQ65XInnJ6smw6GfaqsOM1v0OR?usp=sharing We are hoping to form a long term relationship were we can provide you with more work of this type and engineering type. I will reply your other message about those projects too. Let me know what you think and how long you might take. We are ok to stagger the process, overall structure first so we can use the design to run our analysis, then focus on the details after. Thanks, Tyler Wickett Update your browser to use Google Drive and other apps - Google Drive Help A web browser is what you use to go to websites and use online apps like Google Drive. This article will show you how to update your browser and fix problems so you can keep using Google Drive and oth
opportunity
Urgent 3D Design Project, Industrial Curtain & Bracket (24 hour)
We’re looking for a skilled 3D designer who can create a realistic 3D model within 24 hours. About the project: We manufacture flexible industrial PVC curtains. For this project, we need a 3D design showing a weather protection screen (a flat PVC sheet) being installed on the outside of an industrial building. The design should also illustrate custom beam clamps we’ve developed to attach the sheet to the building’s structural steel. What we’ll provide: A CAD drawing of the beam clamp/bracket A mock-up drawing of the PVC sheet layout What we need from you: A 3D visual/model combining these elements into a clear, realistic presentation Professional rendering that communicates how the system will look once installed Delivery within 24 hours of project start Ideal freelancer: Experienced in industrial product visualization or mechanical design Proficient in SolidWorks, Fusion 360, Blender, or similar Can work fast and deliver to a high standard Please include examples of similar 3D industrial or mechanical renderings in your proposal. If you can do a little video / animation of the product being installed that would be even better, please specify if you can do this in your proposal.
opportunity
Fix & Finalize 3D-Printable Prototype (SolidWorks)
Summary I have an issued/pending patent and an existing SolidWorks assembly of the device. The current design has functional flaws. I’m looking for an experienced mechanical designer to audit the model, correct the design, and deliver a fully 3D-printable, working prototype. Scope / Responsibilities Review my patent drawings/claims and the current SolidWorks parts/assembly. Diagnose failure points (mechanism, tolerances/fit, strength, interference, motion/kinematics). Propose and implement design changes with DfAM best practices (supports, overhangs, fillets, snap-fits/fasteners, inserts, clearances). Run basic verification (tolerance stack-up, interference/motion check; light FEA preferred). Recommend process & materials (FDM/SLA/SLS; e.g., PETG/ABS/PA12, tough/elastic resins) and any off-the-shelf hardware (e.g., heat-set inserts, screws, springs). Provide at least one design iteration after feedback to reach a functional print. Requirements Expert in SolidWorks (Fusion 360 acceptable) and design for 3D printing (FDM, SLA, or SLS). Proven track record turning patent concepts into functional printed prototypes. Strong understanding of printed part tolerances, joints, and mechanisms. Clear communication and regular progress updates. Deliverables Updated parametric CAD: .SLDPRT/.SLDASM + STEP. Print-ready files: .STL/.3MF with recommended orientation, layer height, infill, supports (slicer notes). Assembly package: drawings, exploded views, BOM, and critical tolerances. Short design report: issues found, fixes made, and material/post-processing guidance (e.g., resin choice, heat-set inserts, surface finishing). (Nice to have) Summary of motion/FEA checks. What I’ll Provide Patent document(s), the current SolidWorks model, and notes on the observed failures & target performance. How to Apply Please share: A portfolio/link highlighting similar functional 3D-printed mechanisms. Your approach, software version, and questions you’d ask up front. A fixed-price or milestone quote with an estimated timeline. NDA and IP assignment are required; all files and IP remain mine. Looking forward to working together.
3D CAD Modeling in Fusion 360 or SolidWorks
I need a 3D modeler who can create a 3D model of a stamp based on reference photos in Fusion 360 or SolidWorks. Important requirement: the candidate must be highly attentive to details. Please include in your proposal: How much time it would take you to model this stamp. Your fixed price for the job. Examples of your previous work with similar complexity. Check the link to zip folder with detailed photos as reference material. https://www.dropbox.com/scl/fi/dxup3rn4ehs0tyvau9o0x/Medium.zip?rlkey=v3tusoptnadmcz37jtw4k8tzm&st=wwmvze5m&dl=0
Old paperwork drawing that I need to be cleaned up
Can you help me with some of old paperwork that I need to be cleaned up? in AutoCAD or Solidworks maybe? I have several more but first need to done this within 12-24 hours. I attached an example.
FEA Analysis
I am seeking an expert in Finite Element Analysis (FEA) to conduct an in-depth analysis of various components designed in SolidWorks. The ideal candidate will possess extensive experience in performing simulations to evaluate structural integrity, stress distribution, and potential failure points under different loading conditions. Deliverables should include comprehensive reports detailing findings, visualizations of stress and strain distributions, and recommendations for design improvements. Proficiency in SolidWorks and a solid understanding of engineering principles are essential for this project.
urgent
CAD Mechanical Design Engineer -Concept Design for Proposal Work
CAD Mechanical Design Engineer (Robotics) — Concept Design for Proposal Work Project type: Ongoing, part-time contract Collaboration: Live sessions over Microsoft Teams Location: Remote (UK/EU time zones preferred) Start: ASAP About us We’re a UK robotics & automation integrator working with FMCG and consumer-goods manufacturers. We need rapid concept mechanical designs for proposal packs—layouts, envelopes, and early BOMs that help customers visualise solutions and support costing. The role Work directly with the founder/lead engineer in live Teams working sessions to turn ideas and constraints into clear mechanical concepts for robot-based systems (palletising, packing, end-of-line handling). You’ll translate requirements into quick, tidy CAD that we can drop into proposals the same day. What you’ll produce 2–3 concept options per project (as applicable), including: Overall layout with key dimensions & working envelopes Robot reach checks and cell layouts (bases, guarding, infeed/outfeed) Early mechanical scheme for tooling, conveyors, and frames (no full detailing) High-level parts list / rough BOM with assumptions Exported views/renders and STEP for sharing Light mark-ups for cost estimation (materials, bought-outs, risk notes) Must-have skills CAD: SolidWorks preferred (Inventor/Fusion acceptable if you can deliver STEP + clear source files) Strong background in special-purpose machinery / packaging equipment / robotic cells Competence with sheet-metal & fabricated frames, guarding, and bought-out components Ability to work fast and clean at concept level; good judgement on what to simplify vs. model Comfortable collaborating live on Teams (screen share, quick whiteboarding) Excellent written English and clear drawing annotations Nice to have Experience with FANUC/KUKA cells (reach, payload, cycle-time considerations) Basic pneumatics specification for EOAT/grippers Awareness of CE/UKCA guarding principles (PLr, interlocks, access) Basic electrical/mechatronics interfacing awareness (just enough for layout allowances) How we’ll work Short brief before each session (product, rates, target throughput, constraints) 60–120 min live design sprints on Teams to sketch, block-model, and converge on a concept You tidy files off-call and deliver the agreed outputs (usually within 24–48h) Deliverables & formats Native CAD files + STEP Dimensioned layout PDFs (A3/A1) 2–3 annotated renders or screenshots for proposals BOM/assumptions list (Excel or PDF) Budget Hourly: open to proposals based on speed/portfolio Typical mini-project: 6–12 hours per concept round Compliance NDA and IP assignment required (work-for-hire). Please confirm you can keep client/product details confidential. To apply (please include): Portfolio: 3–5 examples of robotic cells/special-purpose machinery concept layouts you personally produced Tooling note: Which CAD you use and version Speed: Typical time to produce a dimensioned layout + STEP + basic BOM from a brief Relevant experience: Robot brands, industries, and any EOAT you’ve designed Availability: UK-hours availability Mini prompt (optional but preferred): In 3–6 bullets, outline a concept for a single-robot case-packer cell handling 10 kg cases at 12 cpm with infeed conveyor and pallet outfeed—list key assumptions, envelopes, and obvious risks.
RCCB Slider Slot Spring Mechanism Design
We Are Developing a Residual Current Circuit Breaker (RCCB) Currently, most RCCBs use a toggle (up-down handle) mechanism for ON/OFF operation. We want to replace the toggle mechanism with a slider slot + spring mechanism, where the user will operate the RCCB,using vertical slider instead of a toggle. Scope of Work: Study the existing toggle + spring RCCB mechanism. Redesign the ON/OFF operation to use a slider slot with spring return. Ensure the slider engages with latch & trip mechanism properly. Provide 3D CAD design (SolidWorks/Creo/AutoCAD). Provide 2D technical drawings with dimensions. Exploded view of assembly. Skills Required: Mechanical design for electromechanical products. CAD modelling (SolidWorks / Creo / AutoCAD). Knowledge of toggle / slider mechanisms with spring action. Experience in switchgear or circuit breaker design is a plus. Deliverables: CAD files (3D + 2D). Exploded view of the new slider slot spring mechanism. Material list (BOM) Note: I want to make the mechanism of that switch after watching the video that I sent
pre-funded
3d Motion Graphics Artist / Animator
I have CAD files (format: STEP/IGES/etc.). I need a 5–10 second animation of the model parts coming together into the final product. and then show gas lit on the model Output: MP4 or MOV video file. Purpose: this is a test to find the right animator for ongoing work. We only need a 5-10 second example done then we will engage to do a5 x 30sec-60 videos Please include examples of CAD/product assembly animations you’ve done before. Deliverables: One short animation clip (5–10 seconds) as a test Clean, smooth animation of parts assembling Basic lighting and camera setup (not full cinematic render at this stage will be later Skills Required: CAD import & preparation (SolidWorks, Fusion 360, STEP/IGES files, etc.) 3D animation (Blender, 3ds Max, Maya, Cinema4D, etc.) Rendering for video export Budget/Scope: Paid test project (fixed price) 30 for the test then others at 100-250 with depending on length etc Potential for repeat work on full animations if successful Some examples are: https://www.canva.com/design/DAGzNDaZSjo/dnKRWyTBfWVOS6tbFnrY9A/edit?utm_content=DAGzNDaZSjo&utm_campaign=designshare&utm_medium=link2&utm_source=sharebutton
Fusion360. 3D card, Solidworks
Description: We are developing a new protein shaker bottle called Twystr. It is a modern take on the supplement mixing method. Unlike traditional shakers, Twystr features a built-in container that holds dry powder (e.g. protein) separately and releases it as a liquid via a twist or other mechanism. This contest will select the best bottle design concept and CAD model based on form, function, and creativity.
opportunity
Produce electrical schematics for simple circuits.
We are a manufacturer of electric motors and associated control equipment. We require someone to produce approximately 24 very simple schematics in solidworks, based on sketches and info we will provide. The software employed must be solidworks (and must of course be a proper licence), minimum edition 2023 or later. All info will be supplied as non solidworks diagrams similar to the images attached (probably in a powerpoint or PDF doc). We will provide our A3 drawing template, and the deliverable will be native solidworks .dwg files and PDF's of the schematics. Normal symbology for such diagrams is something you must already have experience and knowledge of, to BS7671 where applicable. Where there are PCB's etc, we will supply JPEG's for you to "diagramise". We are looking for someone based in the UK.
opportunity
Technical Illustrator Needed for Patent Drawings – Luggage
We are a UK luggage manufacturer (Aerolite) with production in China. We have developed a new expandable cabin case feature (an internal zip expander located below the main body zip). We are preparing to file a patent for this innovation and require professional patent-style technical drawings to include with the application. What We Need: Create clear, line-based technical drawings (black & white) suitable for a patent application. Show the luggage from different angles (front, side, top, perspective). Include exploded views and/or sectional views to demonstrate how the expandable zip mechanism works. Drawings must comply with the standards required by major patent offices (UKIPO, EPO, USPTO, WIPO). Requirements: Experience creating patent drawings or technical illustrations. Strong skills in CAD or technical illustration software (AutoCAD, SolidWorks, Illustrator, etc.). Understanding of patent office guidelines for drawings (line thickness, shading, no color, etc.). Ability to work from product photos, sketches, or CAD models. What We Provide: Photos of the prototype luggage. Sketches and notes explaining how the expandable zip mechanism works. Reference images of similar luggage products for context. Deliverables: 6–10 technical drawings showing different views and details of the product. Final files in vector / high-resolution formats (PDF, TIFF, or AI). Budget: Please quote your price for a complete set of drawings. We are open to fixed price or hourly rates depending on experience. How to Apply: Share examples of previous patent drawings or technical illustrations you have created. Briefly describe your process for turning sketches/photos into patent-ready drawings.
opportunityurgent
Custom technical drawing edits
Gabriel Scott is a luxury lighting and furniture brand known for its contemporary design language, artisanal craftsmanship, and commitment to quality. Our collections are specified by leading interior designers and architects across the globe for high-end residential, hospitality, and commercial project. We are looking for a highly skilled and detail-driven Designer with a strong technical background and proven experience using AutoCAD, SolidWorks, and SketchUp to produce custom technical drawings and visuals for client projects based on tailored briefs. Some of these requests for custom lighting are very urgent and need them turned around in the next 24 hours. We have the files and the brief, we just need someone who is experienced doing something similar to turn them around. Please let me know what you need in order to quote for the work.