A PCB that has a critical size of 34mm Length x 19mm Width.
A similar design as the PCB pictured.
The output from the charger is 7.5V DC at 1.0A.
The battery pack is fitted with 4X D Cell NIMH 9000MAH Batteries/Cells. It is a 4.8V 9Ah rechargeable battery pack.
Requires 3 connection points, that when charging, the VOLT OUT and Ground, produce 7.5 volts.
I believe this is a battery pack protection board but my knowledge is not massive when it comes to PCBs.
I would be looking to get these produced and assembled by JLCPCB. So components used would need to be confirmed that can be assembled by JLCPCB.
I will require the following files to have the PCBs produced;
GERBER files ready for production
BOM file filled out with manufacturer and seller data
CPL or PP files
If you think you can help me with this and have the expertise I require, please get in touch.
Login to your account and send a proposal now to get this project.Log in
Clarification Board Ask a Question
Do you require an exact copy of this board .? its obvs got a 555timer a 4060 counter a Mosfet etc . If so then It would possible to send the board to a UK address to confirm routing values etc .