
Add CAD drawing of a chevron parquet pattern onto existing dwg
- or -
Post a project like this$
- Posted:
- Proposals: 5
- Remote
- #1113447
- Expired
Description
Experience Level: Entry
Information for the business: interior design / flooring
Design details: Please see attached a .dxf drawing we need to complete inserting a parquet chevron pattern 90 degree angle in the areas highlighted in yellow as shown in the sketches also attached. I will need a pdf to scale and the cad file.
Please can you provide me with a quotation to carry out works as per notes below:
- Please remove all measurements
-The lengths of the staves thought the apartment should be dictated by the full length of the staves in the corridor (see exact indication in the sketch)
- The width of the staves is 12 cm.
- The orientation of the pattern is shown on the sketches.
- The lines from which the pattern should be launched in the rooms where there is a change of orientation are shown with a green line
- Where there is a change in direction in the pattern – we need to insert thresholds. Please highlight the thresholds in RED as per my sketches.
- Please confirm exact square meterage (m2) of the area highlighted in yellow/where the chevron pattern is applied
- Please insert in the drawing a text note to say: Please note: this is not an installation drawing and should be referred to only for general guidance for patter and orientation
Important note: I need the drawing completed by today.
I trust all well, and look forward to receive your quote. Any query, please do not hesitate to contact me.
Kind Regards,
Ideas for the visual style: as shown on the sketches and as per description above
Extra notes:
Design details: Please see attached a .dxf drawing we need to complete inserting a parquet chevron pattern 90 degree angle in the areas highlighted in yellow as shown in the sketches also attached. I will need a pdf to scale and the cad file.
Please can you provide me with a quotation to carry out works as per notes below:
- Please remove all measurements
-The lengths of the staves thought the apartment should be dictated by the full length of the staves in the corridor (see exact indication in the sketch)
- The width of the staves is 12 cm.
- The orientation of the pattern is shown on the sketches.
- The lines from which the pattern should be launched in the rooms where there is a change of orientation are shown with a green line
- Where there is a change in direction in the pattern – we need to insert thresholds. Please highlight the thresholds in RED as per my sketches.
- Please confirm exact square meterage (m2) of the area highlighted in yellow/where the chevron pattern is applied
- Please insert in the drawing a text note to say: Please note: this is not an installation drawing and should be referred to only for general guidance for patter and orientation
Important note: I need the drawing completed by today.
I trust all well, and look forward to receive your quote. Any query, please do not hesitate to contact me.
Kind Regards,
Ideas for the visual style: as shown on the sketches and as per description above
Extra notes:

Anna S.
100% (13)Projects Completed
10
Freelancers worked with
9
Projects awarded
19%
Last project
11 May 2021
United Kingdom
New Proposal
Login to your account and send a proposal now to get this project.
Log inClarification Board Ask a Question
-
There are no clarification messages.
We collect cookies to enable the proper functioning and security of our website, and to enhance your experience. By clicking on 'Accept All Cookies', you consent to the use of these cookies. You can change your 'Cookies Settings' at any time. For more information, please read ourCookie Policy
Cookie Settings
Accept All Cookies