Ansys Projects
Looking for freelance Ansys jobs and project work? PeoplePerHour has you covered.
Post an offer to educate them
Past "Ansys" Projects
opportunity
ANSYS FLUENT for mass flowrate and temperature distribution
Effects of mass flowrate: take at least 4 different mass flowrates in the range of 0.1 kg/s - 0.5 kg/s and calculate the temperature distributions on the inner and outer walls as well as the temperature and velocity profiles at the outlet. Discuss the trends that are observed and explain the underlying mechanisms. For these calculations assume that the thermophysical properties of nitrogen is constant, based on the values at 300 K.
Seamless Copper Extrusion FEA Analysis
Project Description: We are seeking a skilled freelancer with expertise in Finite Element Analysis (FEA) to assist us in analyzing the extrusion process of copper billets. The project involves performing FEA simulations to understand the effects and optimize the seamless extrusion of copper from a billet heated to 650°C through a reducer and mandrel. Project Objectives: FEA Simulation: Utilize the provided CAD model of the extrusion setup to perform Finite Element Analysis simulations. Effects Analysis: Investigate and analyze the effects occurring during the extrusion process, such as temperature distribution, stress concentrations, material flow, and deformation. Optimization: Identify areas for improvement and optimization within the extrusion process to enhance efficiency and product quality. Recommendations: Provide detailed recommendations based on FEA results to mitigate potential issues and improve the overall extrusion process. Deliverables: FEA Simulation Results Report: A comprehensive report detailing the findings of the FEA simulations, including temperature profiles, stress analysis, material flow patterns, and deformation characteristics. Optimization Recommendations: Detailed recommendations for optimizing the extrusion process based on the FEA results, including suggestions for adjusting parameters such as temperature, speed, and die geometry. CAD Model Verification: Validation of the CAD model against FEA results to ensure accuracy and reliability. Skills Required: Proficiency in Finite Element Analysis (FEA) software such as ANSYS, Abaqus, or similar. Strong understanding of material behavior, especially copper, at elevated temperatures. Experience in CAD modeling and simulation. Ability to interpret and communicate complex engineering data effectively. Timeline: The project timeline is flexible, but we anticipate completion within [insert timeframe]. We are open to discussing specific deadlines based on the freelancer's availability and proposed schedule. Budget: The budget for this project is negotiable based on the freelancer's expertise, experience, and proposed approach. Please provide your estimated quote along with your proposal. How to Bid: Interested freelancers are invited to submit their proposals detailing their relevant experience, approach to the project, estimated timeline, and budget. Additionally, please include any previous work samples or case studies demonstrating your proficiency in FEA analysis and simulation. We look forward to collaborating with a talented freelancer to optimize our copper extrusion process and achieve superior results. If you have any questions or need further clarification, please don't hesitate to reach out. Thank you for considering this opportunity.
Ansys wind simulation project
I need your ANSYS services for a project I'm currently working on. Get back to me as soon as you can.
Convert xcdoc Spaceclaim 2023 R2 Files to STEP files
Wanting to have 15 Ansys SpaceClaim 2033 R2 files converted to STEP files. Have included a image to give you an idea of the files that need converted. 14 of the files are simple. 1 file is made up of many parts. Have included 1 scdoc file of one of the parts so you can check if you can open them. You CONNOT open SpaceClaim 2033 R2 files in older versions of SpaceClaim so if you don't have SpaceClaim 2033 R2 will will not be able to help me. Thanks.
Lesions in ANSYS
Hi all I am looking for someone that is proficient in ANSYS to spend 5-10 hours with me to teach me how to do steel structure analyses in ANSYS. I am familiar with the program interface and the FEA concepts but due to time constraints the best way to get this information for me is to work with someone that is familiar with this software. I am a electronics engineer and i am familiar with engineering principles of different disciplines. My project will require structural engineering input for some time to come so if we can get along well there is a possibility of a longer contract for someone with ANSYS experience. Regards Chris
opportunityurgent
FRP Wetting head
Please can you draw the attached. Please allow for the following; - Inventor 3D model of Chemix Mixing Head in FRP (Details B, D, and F) - Inventor 3D model of Chemix Sight Tube in Acrylic (detail A) - Inventor 3D model of Chemix Mount Stand in 316ss (detail E) - Fabrication drawings for both Delivery will need to include - Combined Inventor model - stp file of combined model - All fabrication drawings on the attached .idw (will sent to successful applicant) - Drawing numbers sent to successful applicant Whilst the attached shows the layout of the model. The description of items should be as follows. A = 100mm ID NB Clear Acrylic Pipe with standard ANSI 150 (ASME B16.9) 100NB Flange Connection B = 32mm N.B. x 3.2mm thick - with 80mm Inlet Funnel (One drawing for all items B, D, F) Note for B - welded into water Header (F) C = 5 off 1/4” NPT Thread Nozzles Mounted in bottom Note for C - mount to bottom Flange of F on 82mm PCD at 72 (360/5) degrees to each other D = 25mm NB FRP (changed to) Inlet Flange must have gussets as per standard flanges (eg 0960-101-30-0001) E = External 4mm - Mount Frame to bolt to the top flange of F F = 100mm NB standard FRP pipe with; - 2 off blank flanges drilled to suit ANSI 150 (ASME B16.9) 100NB flange bolt arrangements - Also drilled to fit and seal item B - With item D to fit
Crash Test Simulation Ansys LS-DYNA or similar
We are looking for a designer who can simulate a crash test on an anti terrorist barrier using Ansys LS-DYNA or similar. We need to ensure that our design is effective in stopping a vehicle. We require the simulation to prove our design and a report to include the stress points during impact of the vehicle.
Ansys Altium PCB Design
We require the services of a talented electronics designer to design an MCU based 6-layer PCB. He/She MUST be able to use Altium & Ansys SIWave proficiently. You must also be acquainted with Signal Integrity, Power Integrity & EMC.
Design Project
I need a quote for: The design of a low cost greenhouse for small scale farmers. I need help with the actual design, Ansys structural modelling Possibly CFD Designing and putting together a drip irrigation system Also a geo solar system for heating and cooling
Aerodynamic Analysis of NACA 4412 Airfoil
To draw the geometry as well as perform the aerodynamic analysis on airfoil NACA 4412. I need the following parameters to be evaluated from this analysis: 1. Aerodynamic drag and lift force 2. The vortex generation Moreover, the analysis is to be performed via ANSYS or COMSOL Multiphysics software.
opportunity
ANSYS SOFTWARE TO DESIGN AND SIMULATE A STEADY AIRFLOW IN A DUCT
I will need someone to design for me A duct nozzle and simulate the airflow in the duct nozzle. I will need Geometry, Mesh, Setup, Solution and Results done all for the project please step by step. Thank you speak soon.
Install GNU MCSim software on my Mac laptop
Hi there, please could you 1) install MCSim onto my MacBook Air and 2) get it to run an exemplar model file? I have experience of using MCSim on Windows (after it was installed by someone else). Now I would like MCSim to be installed on my Mac. I assume this is possible because the installation guide says "we are distributing the source code and you should be able to compile it for any system, provided you have an ANSI C compliant compiler". I have little programming experience, and I cannot seem to complete the final stage(s) of installation as it is command-line driven and makes use of Terminal (see notes below). I am based in Sheffield, and am willing to travel if necessary - perhaps we can meet up in a coffee shop where you could install it for me? You would also need to get MCSim to successfully run an exemplar model file which is provided in the download package (in the 'examples' folder). You would need to show me what steps are needed to get it working please, for my future reference. MCSim can be downloaded for free at: https://www.gnu.org/software/mcsim/ Installation instructions are available at: https://www.gnu.org/software/mcsim/mcsim.html#Installation Some more detailed installation notes are in the download package, which I have provided here as 'other helpful material' ('Detailed installation notes'.pdf). Below are my notes I have made so far regarding 1) installation and 2) running an example model (apologies if they are rather simple), which might be helpful:- 1) Installation 1. Download XCode from app store (MCSim needs to use its C compiler) 2. Download the mcsim package (from web address above), rename to 'mcsim' and put in documents folder. 3. In terminal, cd to documents/mcsim, and enter the following: './configure prefix=/users/alexcooper/documents/mcsim libraries=/users/alexcooper/documents/mcsim/lib' Nb. use of prefix=... ensures that the package's commands will be installed in this directory. By default, installation saves to /usr/local/bin, which access to is apparently denied. Nb. use of libraries=... ensures that the library files will be installed in this directory. In the installation guide, it says 'for packages that use the X Window System, `configure' can usually find the library files automatically'. In my mac, it seems I need to specify the location (otherwise I later get an error message saying warning: remember to run 'libtool --finish /usr/local/lib') 4. Enter 'make' 5. Enter 'make install' 2) Running an example model file 1. Move the pbpk_man.model file (located in the 'examples' folder) into the ‘mod’ folder. In terminal, cd to the mod folder. Then enter './mod pbpk_man.model' Nb. mod translates the file into c code, and creates a file called ‘model.c’. Copy this file into the ‘sim’ folder. 2. Cd to the ‘sim’ folder, and enter 'chmod +x ./makemcsim' Nb. chmod +x gives permission to the sim folder, which was previously denied (not sure why). 3. Enter './makemcsim' Nb. I then get an error saying 'mod: command not found'. If you can get this to work, the makemcsim command should produce an executable file. Nb. my notes for the following final steps are for Windows, so the entry commands may need to be adjusted a bit:- 4. Rename the executable file to ‘mcsim.pbpk_man.exe’, and then move it to the main mcsim folder. Also move the corresponding input file (located in the examples folder, called pbpk_man.in) to the mcsim folder. 5. Cd to the mcsim folder, and enter 'mcsim.pbpk_man' When asked for the input file, enter 'pbpk_man.in' This should produce an output file. It can be read, for example by changing the extension to .csv
Help, advice running cyclic loading in ansys
I am in search of someone with extensive knowledge and experience with ansys. I am currently trying to run a cyclic test simulation on my 3d solid but running into issues. Please get back to me if you could be of help. Best regards D
Designing a string based driving mechanism of a drone.
i need someone who is good in solidworks and ansys workbench for the design and analysis of a mechanism. In ansys i need someone who can do rigid dynamics analysis and modal analysis on the design in ansys workbench. It is actually a drive mechanism for Flapping wing bird drone. I have one already done but it is failing in modal analysis. so you need to optimize just the dimensions of the model to get the correct results in modal analysis. finding Angular velocity, angular acceleration and in the end natural frequency of model is all possible in solidworks. the main issue is designing a mechanism.
Project model
I need to perform FEA analysis (such as ansys or nastran) and outline the process, then extract the results from FEA and plot them and analyse them and discuss.
I need an ANSYS expert
I need tutorials on how to perform stress-strain analysis and other types of failure analysis on certain structure l have that I will provide to the freelancer.
I need an ANSYS expert
I need to perform an analysis such as stress - strain analysis and other failure analysis to a certain structure, and I need tutorials into how to perform it.
I need an ANSYS expert
I need to perform stress analysis and other types of failure analysis for certain structures via ANSYS. I got the file from grabbed. I have to produce such analysis to a certain product. later on, I will provide the freelancer with further details of the project.
I need a ANSYS expert
I need tutorials on how to learn how to simulate the interactions between various physics like dynamics, statics, fluids, electromagnetic, thermal, and vibrations.
FEA ANSYS - Train track mesh and analysis
A plane stress analysis is performed since the thickness of the plate is small when compared to the breadth and height. However, in cases when the thickness of a material is larger than the other 2 dimensions (breadth and height) a plane strain analysis can be carried out. (More detail and provide and i have done most of work already)