I need to redesign a battery enclosure (original STL supplied)
- or -
Post a project like this2239
$$
- Posted:
- Proposals: 18
- Remote
- #1912547
- Awarded
ANSYS / 3D Print /Machine Part Design / Mechanical Engineer/ Solidworks / Finite Element Analysis (FEA) Computational Fluid Dynamics (CFD) Multibody Dynamics Optimization & Simulation
Alexandria
Mechanical Design Engineer CAD/CAM/CAE, Solidworks, Fusion 360, Inventor, Siemens NX, 3D printing, Autocad// 3D modelling, 2D Drafting, 3D rendering.
Mold
1443174212194020827232048575197557618014061769014153112764622140147713693001269470
Description
Experience Level: Intermediate
I have a base design for a battery enclosure as stl however i need to modify it (or redesign it)
Required Steps
1) there are a number of holes on the top of the case i need to remove these
2) I need to add a 3.5mm hole to side of the case for a charging port as shown on original stl
3) next to the charging port hole i need to add a 16 mm hole for my power switch as shown on original stl
4) emboss slightly raised logo onto top of case where the holes were removed (supplied in svg)
5) At one end of the case i need to add 2 outlet holes for cables size 20mm with small lip of size 5mm these should be placed 30mm away from each corner
6) I need a hole to fit an lcd panel on the top the enclosure near to the opposite end of the cable holes (but on the top same top panel we removed the holes from and embossed the logo not the end). This hole should be of size 43.5mm by 11.5mm
SLT original design and SVG logo to emboss to top of case can be found in this folder here
https://1drv.ms/f/s!An2FXJ7_5wUgiKxnFWMPTHYplkwmmg
Whatever software is used Solidworks or fusion 360, etc i would need the original project files supplied so i could make small alterations if needed, I would also want a stl version for 3d printing.
Kindest Regards
Andrew
Required Steps
1) there are a number of holes on the top of the case i need to remove these
2) I need to add a 3.5mm hole to side of the case for a charging port as shown on original stl
3) next to the charging port hole i need to add a 16 mm hole for my power switch as shown on original stl
4) emboss slightly raised logo onto top of case where the holes were removed (supplied in svg)
5) At one end of the case i need to add 2 outlet holes for cables size 20mm with small lip of size 5mm these should be placed 30mm away from each corner
6) I need a hole to fit an lcd panel on the top the enclosure near to the opposite end of the cable holes (but on the top same top panel we removed the holes from and embossed the logo not the end). This hole should be of size 43.5mm by 11.5mm
SLT original design and SVG logo to emboss to top of case can be found in this folder here
https://1drv.ms/f/s!An2FXJ7_5wUgiKxnFWMPTHYplkwmmg
Whatever software is used Solidworks or fusion 360, etc i would need the original project files supplied so i could make small alterations if needed, I would also want a stl version for 3d printing.
Kindest Regards
Andrew
Andrew J.
100% (4)Projects Completed
4
Freelancers worked with
3
Projects awarded
100%
Last project
12 Mar 2018
United Kingdom
New Proposal
Login to your account and send a proposal now to get this project.
Log inClarification Board Ask a Question
-
There are no clarification messages.
We collect cookies to enable the proper functioning and security of our website, and to enhance your experience. By clicking on 'Accept All Cookies', you consent to the use of these cookies. You can change your 'Cookies Settings' at any time. For more information, please read ourCookie Policy
Cookie Settings
Accept All Cookies