I need to design a MIXER for my Flat Bed Grain Bin
- or -
Post a project like this$$$
- Posted:
- Proposals: 1
- Remote
- #1836663
- Expired
Description
Experience Level: Expert
Estimated project duration: 1 - 2 weeks
I have a Flat Bed Grain Bin of Size 5000 x 2500 x 600 mm (L x W x H). This Bin will be filled with Grains like Paddy or Wheat to height of 600 mm. This 600 mm column of grains needs to be rolled over. Kind of rolled over, so that the bottom layer of grains are moved to the top and vice versa.
The walls of the dryer are constructed with 50 x 50 x 6 mm angles, made in to frames. It is then fixed with 2 mm MS sheet welded within the frames.
The mixer should be mounted on the 50 x 50 x 6 mm angle, with or without additional channels as may be required by the new design. It should be fixed on either side of the 2500 mm width and the mixer should travel along the 5000 mm length.
The mixer should have a centre shaft, fitted with paddles (long rod of 600 mm long with paddle plate at the end to scoup the grain up). SO the mixer keeps rolling and at the same time moving forward and back along the length of the dryer.
The forward and reverse motion shall be controlled with the help of Limit Switches.
The rolling and mixing will be facilitated with the help of Gearboxes to be recommended by the designer.
The bulk density of the grains shall be approx 700 Kgs/m3.
We are looking for experienced designers who has related experience in designing rotating components.
Interested persons may ask us for relevant details which will be provided upon specific request.
The walls of the dryer are constructed with 50 x 50 x 6 mm angles, made in to frames. It is then fixed with 2 mm MS sheet welded within the frames.
The mixer should be mounted on the 50 x 50 x 6 mm angle, with or without additional channels as may be required by the new design. It should be fixed on either side of the 2500 mm width and the mixer should travel along the 5000 mm length.
The mixer should have a centre shaft, fitted with paddles (long rod of 600 mm long with paddle plate at the end to scoup the grain up). SO the mixer keeps rolling and at the same time moving forward and back along the length of the dryer.
The forward and reverse motion shall be controlled with the help of Limit Switches.
The rolling and mixing will be facilitated with the help of Gearboxes to be recommended by the designer.
The bulk density of the grains shall be approx 700 Kgs/m3.
We are looking for experienced designers who has related experience in designing rotating components.
Interested persons may ask us for relevant details which will be provided upon specific request.
Manikandan K.
0% (0)Projects Completed
-
Freelancers worked with
-
Projects awarded
0%
Last project
14 May 2024
India
New Proposal
Login to your account and send a proposal now to get this project.
Log inClarification Board Ask a Question
-
There are no clarification messages.
We collect cookies to enable the proper functioning and security of our website, and to enhance your experience. By clicking on 'Accept All Cookies', you consent to the use of these cookies. You can change your 'Cookies Settings' at any time. For more information, please read ourCookie Policy
Cookie Settings
Accept All Cookies