Data acquisition
- or -
Post a project like this- Posted:
- Proposals: 6
- Remote
- #1918370
- Awarded
Description
TOUCH SCREEN GUI required to operate device
Software defined attributes to set input and outputs expected values.
system to run at 12volt
system has thermo printer to print report of flow reading at start and end of cycle
usb to save report
Inputs
2x inputs to measure pressure from pressure transducers 0-10 or 4-20
2x input to measure flow from flow sensors 0-10 or 4-20 OR HZ
1 x input to measure oil temp from temp sender 0-120 c
outputs
1 x output to switch on pump relay 6v
1x output to switch on heater relay 6v
1 x output to drive solenoid 12v pwm 10-1000 hz
other connections
usb for bootloader
12v +/- ve to power system
3 x 12v to power temp, flow and pressure sensors
1 x pwm to drive solenoid
Gui to incorporate controls for... setting expected input values, start pump, stop pump, start heater, stop heater, select solenoid pattern, start solenoid, stop solenoid,, save report, print report,
gui to display input values and control status
Andy H.
100% (1)New Proposal
Login to your account and send a proposal now to get this project.
Log inClarification Board Ask a Question
-
Hello Andy,
Do you have a technical specification for the device ? For example, what are the input and output interfaces (serial, wifi etc.) ?
Regards,
John R -
I can design, program and produce standalone device with 7'' touch display so it can be inserted on a panel. Is that what you need?
-
Can you tell deadline for this project? Please inbox me for more information.
-
Do you want this as a standalone system with let us say an OLED display and buttons or as a PC based system with the GUI on the PC a USB connection to a box of electronics that has input/outputs etc .
Also as this would probably require a site visit where is your location ( approx ) to gauge the cost.
Regards Mike
Andy H.01 Mar 2018please message me for more info
thanks