Design a PCB for your project / prototype
- Views 21
Explore the marketplace!
What you get with this Offer
Before starting a design, I will review your requirements for a design and provide some advice or feedback if necessary until we agree upon a design that could be done.
The PCB design and schematic capture will be done using Altium Designer.
***
What I provide:
1. PCB gerber+NC files
2. Schematic .PDF file
3. PCB .PDF file
4. 3D .step file.
***
Conditions / constraints:
1. 40 components maximum
2. 380 pads max
3. All components will be chosen from major distributors.
4. If BGA are used, maximum of 9 pins for BGA.
5. If wireless is needed in a design I will only draw the antenna, matching network and Balun components and will not provide the matching network component values/part numbers as the matching network/antenna length estimation is subject to practical testing.
6. Will not accept projects involving DDRx memory.
***
Details about optional add-on services below:
About Pick & Place files:
File will be a .CSV format and will include following columns: Designator, footprint, weather its an SMD part, center coordinates, rotation and layer.
About assembly drawings:
Drawing file will be a .PDF format and will include the following: component outlines, designator and comment.
About panelization:
I Can panelize up to the maximum size of the panel of A4 (210 x 297 mm) for 1.55mm boards and A5 (148 x 210 mm) for thinner boards.
About fitting matched impedance features on two layer boards:
This means that if your project has impedance matched features including but not limited to Wi-Fi, Bluetooth, USB,
Ethernet, PCI Express it will be a lot more difficult to design a PCB on two layers, therefore I offer this at an extra cost.
Maximum PCB thickness for this will be 1mm.
You will not need this add-on if you're OK with having a four layer PCB.
About simulation data:
For an additional cost I can provide you with simulation schematic and test results for uncertain blocks of your schematic such as analog RC, LC, active filters, time constant circuits and digital logic gates of up to 15 components/gates.
Max 3 in, 3 outs for analog circuits.
Max 5 in, 8 outs for digital circuits.
Get more with Offer Add-ons
-
I can draw the PCB in custom non-rectangular shapes
Requires no additional time
+$10 -
I can provide you the Pick & Place files and pcb assembly drawings (see details)
Additional 2 working days
+$50 -
I can panelize the PCB for mass production (see details)
Additional 2 working days
+$140 -
I can fit matched impedance features on <1mm thickness two layer boards
Additional 5 working days
+$100 -
I can add extra 20 components / 240 pads
Additional 3 working days
+$100 -
I can add extra 30 components / 240 pads
Additional 5 working days
+$180 -
I can provide you with simulation data for analog filter, timing,logic gate schematic blocks (see details)
Additional 3 working days
+$100
What the Freelancer needs to start the work
Simply send me the schematic (can be preliminary or incomplete) as well as details of how your idea should work, how big and what shape the board should be (for shape, i will either require a .DXF, .AI, .SVG outline or enclosure 3D model in .step, .STL, or .SLDPRT).
Additionally I will require a drawing of where the connectors/switches/LEDs should be located and PCB manufacturing requiremens if available.