Particle Photon program
- or -
Post a project like this$99
- Posted:
- Proposals: 4
- Remote
- #2425297
- Expired
Description
Experience Level: Intermediate
Hello, I need to program a particle photon, here the components that I have
1- Adafruit PIR motion sensor
2- 12vdc engine
3- Adafruit DRV8871 motor driver
4- 12vdc li-ion battery pack
5- Rotary r / c servo
6- on / off switch
7- Momentary push button select programs
8- Neo pixel ring 12x 5050 for programs ID
When you set the switch to ON only the Neo pixel turn green. Then pressing the momentary button only once select the program # 1 blue color, twice program # 2 yellow color, three times program # 3 violet color and four times the program # 4 orange
At all times when the PIR sensor is activated the motor has to stop and the program has to pause and continue where it left off when it is deactivated (all programs)
The R / C servo has to turn on at all times that the 12v motor is on (all programs)
Program # 1
After selecting program # 1 to have a delay of 10 seconds then the engine starts at 100% speed for 60 seconds,
then speed 75% for 60 seconds, then speed 50% for 60 seconds, and speed 25% for 60 seconds and stop
Repeat automatically every 2 hours
Led flashing blue all time during program # 1
Program # 2
After selecting program # 2 to have a delay of 10 seconds then the engine starts at 100% speed for 60 seconds,
then speed 75% for 60 seconds, then speed 50% for 60 seconds, and speed 25% for 60 seconds and stop
Repeat automatically every 4 hours
Led flashing Yellow all time during program # 2
Program # 3
After selecting program # 3 to have a delay of 10 seconds then the engine starts at 100% speed for 60 seconds,
then speed 75% for 60 seconds, then speed 50% for 60 seconds, and speed 25% for 60 seconds and stop
Repeat automatically every 6 hours
Led flashing violet all time during program # 3
Program # 4
Only one time program
After selecting program # 1 to have a delay of 10 seconds then the engine starts at 100% speed for 60 seconds,
then speed 75% for 60 seconds, then speed 50% for 60 seconds, and speed 25% for 60 seconds and stop
Led flashing orange all time during program # 4
1- Adafruit PIR motion sensor
2- 12vdc engine
3- Adafruit DRV8871 motor driver
4- 12vdc li-ion battery pack
5- Rotary r / c servo
6- on / off switch
7- Momentary push button select programs
8- Neo pixel ring 12x 5050 for programs ID
When you set the switch to ON only the Neo pixel turn green. Then pressing the momentary button only once select the program # 1 blue color, twice program # 2 yellow color, three times program # 3 violet color and four times the program # 4 orange
At all times when the PIR sensor is activated the motor has to stop and the program has to pause and continue where it left off when it is deactivated (all programs)
The R / C servo has to turn on at all times that the 12v motor is on (all programs)
Program # 1
After selecting program # 1 to have a delay of 10 seconds then the engine starts at 100% speed for 60 seconds,
then speed 75% for 60 seconds, then speed 50% for 60 seconds, and speed 25% for 60 seconds and stop
Repeat automatically every 2 hours
Led flashing blue all time during program # 1
Program # 2
After selecting program # 2 to have a delay of 10 seconds then the engine starts at 100% speed for 60 seconds,
then speed 75% for 60 seconds, then speed 50% for 60 seconds, and speed 25% for 60 seconds and stop
Repeat automatically every 4 hours
Led flashing Yellow all time during program # 2
Program # 3
After selecting program # 3 to have a delay of 10 seconds then the engine starts at 100% speed for 60 seconds,
then speed 75% for 60 seconds, then speed 50% for 60 seconds, and speed 25% for 60 seconds and stop
Repeat automatically every 6 hours
Led flashing violet all time during program # 3
Program # 4
Only one time program
After selecting program # 1 to have a delay of 10 seconds then the engine starts at 100% speed for 60 seconds,
then speed 75% for 60 seconds, then speed 50% for 60 seconds, and speed 25% for 60 seconds and stop
Led flashing orange all time during program # 4
Jonathan C.
87% (3)Projects Completed
2
Freelancers worked with
3
Projects awarded
0%
Last project
31 Jul 2019
United States
New Proposal
Login to your account and send a proposal now to get this project.
Log inClarification Board Ask a Question
-
do you have a deadline working with?
Jonathan C.11 Jun 2019Not yet sir
815460
We collect cookies to enable the proper functioning and security of our website, and to enhance your experience. By clicking on 'Accept All Cookies', you consent to the use of these cookies. You can change your 'Cookies Settings' at any time. For more information, please read ourCookie Policy
Cookie Settings
Accept All Cookies