Home business workbench design - Sketchup
- or -
Post a project like this£120(approx. $150)
- Posted:
- Proposals: 7
- Remote
- #2200507
- OPPORTUNITY
- Expired
3d modeler, 3d designer, 3d Artist, 3d Visulaizer, Site Supervisor, Surveyor Engineer
Amman
953507177063018544451862017188282719077752232702
Description
Experience Level: Expert
Please, can you help me design a built-in workbench with shelves above on two sides of the bench?
Here is what I am looking for:
Workbench fitted into the wall corner:
The desk surface I would like will essentially fill the space between the door and the existing shelves (see attached photo/sketches). The width of the wall from the shelves to the long wall is 1.12M. Desk height 91cm
Drawer Space for:
- Wrapping Paper 81cm x 52cm
- Tissue Wrapping Paper 72cm x 46cm
- Posters 100cm x 75cm
- Artifacts 15cm high
- 2 x boxes 39cm x 21cm x 20cm (w x d x h) (these contain rolls of book duct jacket protector)
- 4 x Paper file housing (see photo of one of them), 40cm x 30cm x 36.5cm (w x d x h)
- Cupboard
Shelves:
Above the bench on two sides fixed to the wall and bench top, shelves 30cm deep.
Sheet materials:
Workbench carcass 19mm birch ply, Shelves uprights and shelves also 18mm birch ply. Drawer frames can be 12mm birch ply, drawer base 9mm birch ply.
Some specific requirements for the design drawings please:
- 3D visuals, a visual impression in the room, plus an exploded view which would show me all the dimensions and how the pieces are to be assembled.
- for the workbench construction, I hope to use Kreg Screw System to keep the construction simple (https://www.kregtool.com/store/c20/kreg-jigreg-screws/#tab4818).
- For the drawer runners, I hope to use these https://www.grass.at/fileadmin/links/services/produktkataloge/blaetterkataloge/html_daten/en/slide_systems/48/
I am probably overlooking something, so a little bit of email exchange to finalise specification should be expected!
Here is what I am looking for:
Workbench fitted into the wall corner:
The desk surface I would like will essentially fill the space between the door and the existing shelves (see attached photo/sketches). The width of the wall from the shelves to the long wall is 1.12M. Desk height 91cm
Drawer Space for:
- Wrapping Paper 81cm x 52cm
- Tissue Wrapping Paper 72cm x 46cm
- Posters 100cm x 75cm
- Artifacts 15cm high
- 2 x boxes 39cm x 21cm x 20cm (w x d x h) (these contain rolls of book duct jacket protector)
- 4 x Paper file housing (see photo of one of them), 40cm x 30cm x 36.5cm (w x d x h)
- Cupboard
Shelves:
Above the bench on two sides fixed to the wall and bench top, shelves 30cm deep.
Sheet materials:
Workbench carcass 19mm birch ply, Shelves uprights and shelves also 18mm birch ply. Drawer frames can be 12mm birch ply, drawer base 9mm birch ply.
Some specific requirements for the design drawings please:
- 3D visuals, a visual impression in the room, plus an exploded view which would show me all the dimensions and how the pieces are to be assembled.
- for the workbench construction, I hope to use Kreg Screw System to keep the construction simple (https://www.kregtool.com/store/c20/kreg-jigreg-screws/#tab4818).
- For the drawer runners, I hope to use these https://www.grass.at/fileadmin/links/services/produktkataloge/blaetterkataloge/html_daten/en/slide_systems/48/
I am probably overlooking something, so a little bit of email exchange to finalise specification should be expected!
David H.
100% (8)Projects Completed
10
Freelancers worked with
10
Projects awarded
50%
Last project
13 Jan 2021
United Kingdom
New Proposal
Login to your account and send a proposal now to get this project.
Log inClarification Board Ask a Question
-
There are no clarification messages.
We collect cookies to enable the proper functioning and security of our website, and to enhance your experience. By clicking on 'Accept All Cookies', you consent to the use of these cookies. You can change your 'Cookies Settings' at any time. For more information, please read ourCookie Policy
Cookie Settings
Accept All Cookies