Bleed/bacground precise extension for print production

*Core Objective:*
Prepare 2x3m castle illustration for professional die-cutting by extending ALL elements touching ANY trim lines (including complex intersections like flags-walls-towers) with 5cm bleed of their EXACT original colors.

*Technical Specifications:*

Bleed Requirements:
5cm bleed extension required on ALL sides (final document size: 2.1x3.1m). Now the documment is x3 meters, please add 5 cm on sides, so the final documment will hace 2,1x3,1 meter.

*Must extend the background becasue this file will be printed and it is necessary to add bleeds in castle elements colors - All elements must be extended for the bleed (walls, roofs, flags)*


*Critical Production Details:*

Each element's bleed must maintain its:
Original color values
NO new colors or filler backgrounds permitted
NO visible seams or color transitions in bleed areas

*Trim Line Protocol:*

Preserve existing 100% Magenta trim line layer and keep the orginal design
All original artwork must remain:
At original scale and proportions

Technical Note:
Remember - the plotter will cut EVERYWHERE along the 100% Magenta line. So ANY element (even small flags or decorations) touching the cut line MUST have its ORIGINAL colors extended into the bleed area. This means intersections (like where a flag meets a tower) require BOTH colors (flag AND tower) to be properly extended into bleed, ensuring NO white edges appear after cutting.

Delivery Requirements:

Adobe Illustrator .ai file in new size with beleds, 2,1x3 m

I am adding the printcreen of castle. During work I will provide adobe illustrator file.