Experience Level: Intermediate
I need the design and size calculations done for the steel beam structure to support an opening in the house wall. The opening is on the ground floor of a two storey house and approximately 3m wide and 2.3m high. The wall is constructed of natural stone with a fairly lose infill of rubble etc and about 750mm thick. The side support pillars will stand on a concrete pad which they can be bolted to. The whole assembly needs to be able to be bolted together on site (not welded) if possible. Construction similar to the sketch provided will be fine. The exact measurements will be provided.
Joe M.100% (2)
1 Sep 2018
Create an account now and send a proposal now to get this project.Sign up
Clarification Board Ask a Question
There are no clarification messages.