Landscape Irrgation design
- or -
Post a project like this$120
- Posted:
- Proposals: 2
- Remote
- #2042928
- PRE-FUNDED
- Expired
Description
Experience Level: Expert
Irrigation designer is required to design an irrigation system to a domestic landscape
Design an irrigation system for estimating purposes, a bill of quantities is also required
Design Parameters
-Available pressure is 15 litres per minute a 400kpa
-The supply point is next to the driveway
-For this project design only using Rainbird MPR sprays (example 10F,10H,12H etc) popups for lawns and and 300mm risers for gardens
-Pipe velocity should not exceed 1.5metres per second
-Design the mainline using only 1 pipe size (For ease of install) we nominate 40mm class 12.5 HDPE (Please check pressure losses and choose appropriate size) (The brand will be of Australian standard - Friction loss data can be found here
http://www.vinidex.com.au/products/pe-pipe-systems/
-All lateral pipework to sprays, drip and headers/collectors for drip should be Australian standard PVC-U class 12 friction loss data can be found here http://www.vinidex.com.au/products/pvc-pressure/
Please only use 20mm and 25mm PVC
a calculator for Australian pipe friction loss is FLUFF and can be found on the Vinidex website (If your interested)
a breakdown of quantities for estimating purposes is also required
Design an irrigation system for estimating purposes, a bill of quantities is also required
Design Parameters
-Available pressure is 15 litres per minute a 400kpa
-The supply point is next to the driveway
-For this project design only using Rainbird MPR sprays (example 10F,10H,12H etc) popups for lawns and and 300mm risers for gardens
-Pipe velocity should not exceed 1.5metres per second
-Design the mainline using only 1 pipe size (For ease of install) we nominate 40mm class 12.5 HDPE (Please check pressure losses and choose appropriate size) (The brand will be of Australian standard - Friction loss data can be found here
http://www.vinidex.com.au/products/pe-pipe-systems/
-All lateral pipework to sprays, drip and headers/collectors for drip should be Australian standard PVC-U class 12 friction loss data can be found here http://www.vinidex.com.au/products/pvc-pressure/
Please only use 20mm and 25mm PVC
a calculator for Australian pipe friction loss is FLUFF and can be found on the Vinidex website (If your interested)
a breakdown of quantities for estimating purposes is also required
Adrian W.
0% (0)Projects Completed
-
Freelancers worked with
-
Projects awarded
0%
Last project
13 May 2024
Australia
New Proposal
Login to your account and send a proposal now to get this project.
Log inClarification Board Ask a Question
-
My Greetings,
I would like to tell you that I accept what you have defined in your project.Full Design for the Irrigation network shall be finalized .If you are okay with this,send me msg by using this link:
https://www.peopleperhour.com/stream/view?id=14769725
Thanks & Best Regards
660607
We collect cookies to enable the proper functioning and security of our website, and to enhance your experience. By clicking on 'Accept All Cookies', you consent to the use of these cookies. You can change your 'Cookies Settings' at any time. For more information, please read ourCookie Policy
Cookie Settings
Accept All Cookies