I need a 2d or 3d drawing of a fence Im building at home for permit office

  • Posted:
  • Proposals: 27
  • Remote
  • #2118502
  • Completed
Behzad C.Siamak S.Kaegh A.Rafael Ray F.Sabri G. + 22 others have already sent a proposal.
  • 18

Description

Experience Level: Expert
hi I need plan drawings that shows the fence design i am building example given for front of my home. we need the design to show the measurements of all aspects that make up the fence . The fence will have a 20 ft gate that rolls and a 4 ft door. the design has to be very detailed as it will be looked at by architects for Miami dade county where i live in. the design will be used to gain permits so fencing can be installed on my property. so i need a drawings that shows detail and also have text description with full dimensions. once i agree to choose your proposal i will send dimensions of the fence, linear footage, size and example images or hand drawings of panels, post, door and rolling gate. attached is an image of the work i'm welding together and i also can send a picture of the survey as an example of details the county architect asked for.

my fence is categorized as non wind resistant. i spoke to one of the inspectors on Friday and he explained that i need the following drawings or plans for the fence in order to get permits.

Fence is a Horizontal Picket fence with door and rolling gate.

1 - i need to show the linear footage between fence panels and post to the 4ft door. then from the door to the driveway. showing the 20 ft driveway and then the remainder of linear footage of fence to the end of the fence ( i will send you property survey with my hand drawings of what the architect requires)
2. i need to show on that drawing the door opening to right and into property. The 20 ft rolling gate needs to show that it will roll inside property towards the right side of the driveway over a concrete slab that will accommodate the rolling motor and the rail where the gate will sit on when opened. (this will also show up on my drawing in survey)
3 - I need to show drawing for the 4 ft x 5.8 ft door (i will send you example drawing)
4- I need to show drawing of the 20 ft x 5.8 ft rolling gate including wheels and post with rollers that will keep gate from falling. ( I will send you hand drawn image as example)
5- i need to show the 6 ft x 5.8 ft horizontal picket fence panels as well as the 2.5 x 2.5 x 8 ft post . each panel, door, and gate will have horizontal pickets that are 2 inches with gaps that are 4 inches.

New Proposal

Create an account now and send a proposal now to get this project.

Sign up

Clarification Board Ask a Question

  • Mosay J.

    Hi Adolfo,
    Could you tell me your deadline for this project? and how much budget you want to put on this job?
    Thanks
    Mosay