Add solar panels on building roof (skp/cad/revit files provided)

Our regular designer is unable to allocate the time due to other work commitments so we have a quick task which may result in more work.

1.
We would like the Maxeon 6 Solar panels (1032mm x 1872mm) integrated as part of the two areas of flat roof on a building (over an underlayment of metal sheeting which won't be visible), at an angle of 5 degrees.

2.
Spacing between the panels is 5mm.

3.
Attached is a crude image of a building and a Maxeon 6 solar panel specification showing the approximate size and numbers (circa 16.8m wide / 20m long = circa 160 panels at rear and circa 23m wide / 13.4m long = circa 154 panels at front) -the skp/cad/revit files will be provided to the selected provider to do it properly.

4.
You may design the edges and joins however you want as long as it looks good and can be built.

5.
We will want up to three versions (i.e. with a different angles) and an (almost) flat roof version

6.
The panels will be "the roof" where it is flat on the two areas shown (but at an angle of 5 degrees) and will be seamlessly integrated with the rest of surrounding tiles.

7.
The rest of the roof will be a standard concrete https://www.marley.co.uk/roof-tiles/concrete-roof-tiles/edgemere

8.
Time scale is 48 hours complete (or earlier).