3D Design on Computer in OBJ/STL format

  • Posted:
  • Proposals: 6
  • Remote
  • #688444
  • Awarded
Chris R.
DMP 3D - Wayne H.George S.Roy S.Pedro A. + 1 other have already sent a proposal.
  • 1


Experience Level: Intermediate
Information for the business: Electronics
Industry: Entertainment
Design details: First off, Im Dyslexic (one of the hardest person to work with due to bad communitcation )

I've made a design of a Switch out of PLA, (depending on how good the conductive PLA is) this will be a test and would i hope only need a few changes in the future to make it work (One can dream)

I am a Maths Based Dyslexic so i know all the Sizes/Angles needed for this, but my kink is on the switch part itself. This is what i need to work on. But i want a working model to start off, to perfect it.

4 parts

Base: Just a connection to let wires come in to the switch, due to it being PLA i am hoping to place wires in and mole around the cable. This will be the Input output

Shell: The main body of the switch that holds the connections, goes from the switch arm to the Base.

Arm: the rotary arm that dose all the connections.

Top: a Lid that holds it all in place

This switch is hollow so that another arm can go in the middle. Ive built it in a 3D Game called Second Life but it rubbish at exporting TUBES/Circules out of the Game, I've tried many free 3D CAD software but its all too complex to me.
I can built it pritty quick within the game but 3D Cad
Target audience: Proto Type Switch, leading to a finished design
Ideas for the visual style: No Visual as its all hidden bits
Things to avoid: going to small, space is always a problem but need to work with what a 3D Printer can handle
Preferred colors: Black/White
Extra notes: Im in to Electronics/Electricals/Guitars/Computers. Playing around with Stratocaster Guitars and changed the circuit. Now it is time for me to Improve it and make it easier to use. With the age of 3D printing i belive i can make the Switch need to give more power to the Guitar user.

This just stage one, will go around a Voloum/Tone Control to give you 7 Ways to select Pickups (than the normal 5) also on the Tone it will give you a MultiTone Controls changing the Capacitor size form 10-50nF.

If this works i will be working on stage two and three, a Coil flip for the Pickups and a Series Switch. These are things i use but i have to ADD to the guitar but if these Designs work would mean you would just change what you got for these 3D printed items giving you more control

each slice is 2mm tall

[just a 10mm ring that is 1.5mm thick]

[10mm ring that attaches to above plus a 15mm Ring that is 2mm thick]


[lid 60mm with a 8.5mm hole]


[60mm that is 2mm thick, 8.5mm hole...the yellow parts are 10mm by 0.5mm and set every 45Degress as a locater for the switch arm]


[The binary coding, this can be the complex bit but once your mind tiggers in you should see it easy]





I have all these values set out.. The format that i feel happy to express in
Degress From - Degrees To - Diameter - Thickness
045-090 - 60mm - 5.5mm ...
So this would be a ARC that is from 45degress to 90degress and has a diameter of 60mm(radius of 30mm) and is 5.5mm thick.

New Proposal

Create an account now and send a proposal now to get this job.

Sign up

Clarification Board Ask a Question

    There are no clarification messages.