Phoenix - Your AI Assistant3D CAD Designer to create mock-up for portable round bar
- Posted:
- Proposals: 14
- Remote
- #3851119
- Awarded
Nantwich 
Description
Experience Level: Intermediate
Looking for someone to design a 3D CAD mockup as a guideline for a manufacturer to build a portable round bar (3.5m - 4m exterior diameter).
The aim for this bar is to have a metal frame with wooden panelled frontage and solid bar top. It will need an interior lower shelf for bartenders to work from with space underneath this for fridges and glass store. It would also be great to have a specialist shelf for where a large ice tray could be indented.
It will need to be able to be broken up into 6 sections for ease of storage and transportation. One section may need to smaller in width than the rest to allow for an opening for bar staff to enter but big enough to wheel a cask of ale/small under counter fridge in.
It would also be good if it was designed so that it could also be put together as a half moon bar (i.e. 3 sections) rather than a full round bar (6 sections).
Many thanks,
Ed
The aim for this bar is to have a metal frame with wooden panelled frontage and solid bar top. It will need an interior lower shelf for bartenders to work from with space underneath this for fridges and glass store. It would also be great to have a specialist shelf for where a large ice tray could be indented.
It will need to be able to be broken up into 6 sections for ease of storage and transportation. One section may need to smaller in width than the rest to allow for an opening for bar staff to enter but big enough to wheel a cask of ale/small under counter fridge in.
It would also be good if it was designed so that it could also be put together as a half moon bar (i.e. 3 sections) rather than a full round bar (6 sections).
Many thanks,
Ed
New Proposal
Login to your account and send a proposal now to get this project.
Log inClarification Board Ask a Question
-
There are no clarification messages.