I need a shoe-box designer

A shoe-box design is needed. Image-I provided in helpful materials sketches out how it will be. Three faces of the box and inside will be design. A 3-D image below and sides on the top.

Unlike image-I, background the of shoe box needs to be lighter. Preferably, white, creamy white are good.

In the Image-II, I numbered faces in order to prevent misunderstanding. The three outside faces (Number 1,2 and 3) have to have logo in the middle. However, you can see for side face (Number 3) Logo was placed horizontally, here we want logo to be seen vertically when placed in the box.

The upper face (Number 1) might have simple background shapes, poly background, repeating pattern, colour palette. It is up to designer but what we want is to have a stylish design rather than complex, suffocating one. Too hot, too cold colours might kill the purpose of simplicity.

The inside will also have same background colour with outside. For the inside (Number 4) it needs to be covered with a repeating pattern. An idea of repeating pattern is attached to helpful materials in pdf format. The pattern provided must not be used directly, however the tones of colour change in the pattern design might and preferably be same.

For side ones, (Number 2 and 3), they must have a poly tree design on them. Covering the surface of number 2 and 3 starting from the left edge of 3 to ending in the right end of 2. A sample can be provided if asked. And Logo will be provided to designer to be placed in the mentioned places.

That is all for the description. If any further detail is needed please, ask freely, simplicity is appreciated.