Lighting Design Dialux

Hello,

We are a lighting company called "Luminaire Creative Lighting" and we are looking for someone to assist us on a long-term basis. We are based in Saudi Arabia and we are specialized in LED lighting solutions

what is expected of you is as follows:
- The ability to use Dialux lighting design software (Dialux photometric calculation, 3D Rendering)
- Fixture selection following provided requirements.
- Understand of LED lighting, HID lighting and fluorescent lighting.
- Create LED design for building facility, keeping in mind what and where the existing system is located.
- An overall understanding of how to create lighting systems based on candles/LUX

Our first project is a lighting design for a company's meeting room ( calculation and 3d rendering).

The room dimension is 3.8m X 5.9 m with a ceiling height of 2.7 m.
The recommended light level is 300 lux.

You are requested to creatively utilize linear lighting products from one of the shared catalogs. (refer to google drive link below)


You have freedom to use any company, but you can only use products from one company in your design.

-The first Company is Linno
products that can be used are (i33 i55 i88) you can use one or multiple products

-The Second Company is Noortek
products that can be used are (proline Rd, proline Rv, prolineCd, prolineLv ) you can use one or more products

The Drawings are attached.

We are looking foreword to work with you.

Shared catalogs can be found following this link:
https://drive.google.com/open?id=16TrzIPdvCVfIiAb5E6e7Y7NmuJL3qR2Z