I need a proposal for CAD drawing

I need a proposal for the following work. Integrate your drawing with the attached building drawing.

A. Electrical/Power System
1. Design for power generator house with ventilation. The dimension of the generator
the building should have one 15X20 feet room and one 10X12 feet closet for storage
2. The generator house will be located 150 feet from Bedroom I, in the left corner of
the main house the house
3. Run a conduit underground to carry & deliver electricity to the house
4. The generator house’ roof should be designed for mounting and installing solar
panels.
5. The generator house roof should be designed for future surface extension when more solar panels are needed. The roof is expandable on all sides by adding the extension to the underlying wood frame attached to the generator house
6. Design 1 breaker panel for electric power (inside the generator house)
7. Design 1 breaker panel for solar power (inside the generator house)
8. Locate both panels Side by side

B. Plumbing System
1. Water is going to be pumped from wells into a 300 gallon-tank sitting 30 feet above the ground. Water from the tank is delivered into the main house (drawing attached)
2. Pipe from the tower delivers water to the house through the pipe connecting the
main house.
C. Deliverables
1. Integrate your drawing with the attached drawing. Show the connection between the
house and your drawings (Conduit for wiring to the house from the generator
house, the house wiring, electrical outlets in each room.
2. Draw a brake fence around the property with a sliding metal drive-in gate
3. Show at least 3 perspectives of the property in the fence.

Let me know if additional information or drawing is needed