Five small basic boards
- or -
Post a project like this2518
$
- Posted:
- Proposals: 5
- Remote
- #1554677
- Awarded
Description
Experience Level: Entry
Information for the business: Electronics
Design details: ME: Im not a rich guy, Im doing this as i had the idea 2 yr ago and need to sort out a prototype before making the full fancy thing, even then i dont know if there is a market for it.
I need 5 PCB just for Design stages, might be able to sell them also as First Generations.
Final project will be New Electronics Parts.
http://www.apem.com/files/apem/brochures/PT65.pdf
One board based around this PCB Binary switch, Caps... Resisters .. and cable coming out nothing complex.
Just very small as isnt much space.
http://www.lorlin.co.uk/PDF/BCKS.pdf
Two Boards based around a Binary Switch, (i keep trying to work on these but legs drop off when solder wires to it and costs, so need PCB to take it off. Two Designs one basic with just outlets for wires to go else where and another with Caps...
http://www.axetec.co.uk/axetec_media/ptsw01-3_dimensions_v01-1000.gif
I dont have a Foot for this.. and id sooner not work with them, but need them fro the Prototyping.
Two boards, one basic just wires coming off them (im 40 and my soldering is getting bad with age)
And the other has a few caps on it.
Ideas for the visual style: PCB Design
Things to avoid: Web Designers and Graphics Artest, i need someone who knows about PCB Design
Extra notes: Will need to be Dual sided as the boards will need parts on both sides of the board to save on space.
http://www.axetec.co.uk/axetec_media/ptsw01-3_dimensions_v01-1000.gif
Is just a basic Cross over Switch
I will need a PCB (GERBER) file outlet as thats all PCB makers take so Graphics Designers whom dosnt know that format, its no good to me
---------------
Right im Dyslexic so the way i give information over is Rubbish :(
I dont know how to use EAGLE, I've dont some boards but in Inkscape
I had 6 different parts that i needed to talk to the Switches
(my eyes ain't good and soldering is a pain)
These boards where to attach so (with the binary Switch) the legs dont break off.
Binary
Binary one is just a Square board that sits between the 4 Location legs, so the legs solder to the board and keep it in place, and its basically has a hole to solder a wire to each leg of the switch, with locations for a capacitor to come off it and another hole for a ground wire to go in to. Basically making this in to a smooth capacitor going from x to y in stages.
http://www.lorlin.co.uk/PDF/BCKS.pdf
PCBBinary
is the same but it has extra cap and 2 resisters from another circuit onboard.
http://www.apem.com/files/apem/brochures/PT65.pdf
PushPull
its a PushPull Switch with SMD footprints, (basically so i can solder a link on some circuits) i forgot to mark the 3 capacitors on it
http://www.axetec.co.uk/axetec_media/ptsw01-3_dimensions_v01-1000.gif
Is this possible, and small as can go as its for a small space, ie the resistors may have to stand up to make it small if needed as the capacitors will have to be standing up any how
Design details: ME: Im not a rich guy, Im doing this as i had the idea 2 yr ago and need to sort out a prototype before making the full fancy thing, even then i dont know if there is a market for it.
I need 5 PCB just for Design stages, might be able to sell them also as First Generations.
Final project will be New Electronics Parts.
http://www.apem.com/files/apem/brochures/PT65.pdf
One board based around this PCB Binary switch, Caps... Resisters .. and cable coming out nothing complex.
Just very small as isnt much space.
http://www.lorlin.co.uk/PDF/BCKS.pdf
Two Boards based around a Binary Switch, (i keep trying to work on these but legs drop off when solder wires to it and costs, so need PCB to take it off. Two Designs one basic with just outlets for wires to go else where and another with Caps...
http://www.axetec.co.uk/axetec_media/ptsw01-3_dimensions_v01-1000.gif
I dont have a Foot for this.. and id sooner not work with them, but need them fro the Prototyping.
Two boards, one basic just wires coming off them (im 40 and my soldering is getting bad with age)
And the other has a few caps on it.
Ideas for the visual style: PCB Design
Things to avoid: Web Designers and Graphics Artest, i need someone who knows about PCB Design
Extra notes: Will need to be Dual sided as the boards will need parts on both sides of the board to save on space.
http://www.axetec.co.uk/axetec_media/ptsw01-3_dimensions_v01-1000.gif
Is just a basic Cross over Switch
I will need a PCB (GERBER) file outlet as thats all PCB makers take so Graphics Designers whom dosnt know that format, its no good to me
---------------
Right im Dyslexic so the way i give information over is Rubbish :(
I dont know how to use EAGLE, I've dont some boards but in Inkscape
I had 6 different parts that i needed to talk to the Switches
(my eyes ain't good and soldering is a pain)
These boards where to attach so (with the binary Switch) the legs dont break off.
Binary
Binary one is just a Square board that sits between the 4 Location legs, so the legs solder to the board and keep it in place, and its basically has a hole to solder a wire to each leg of the switch, with locations for a capacitor to come off it and another hole for a ground wire to go in to. Basically making this in to a smooth capacitor going from x to y in stages.
http://www.lorlin.co.uk/PDF/BCKS.pdf
PCBBinary
is the same but it has extra cap and 2 resisters from another circuit onboard.
http://www.apem.com/files/apem/brochures/PT65.pdf
PushPull
its a PushPull Switch with SMD footprints, (basically so i can solder a link on some circuits) i forgot to mark the 3 capacitors on it
http://www.axetec.co.uk/axetec_media/ptsw01-3_dimensions_v01-1000.gif
Is this possible, and small as can go as its for a small space, ie the resistors may have to stand up to make it small if needed as the capacitors will have to be standing up any how
Angel L.
93% (3)Projects Completed
3
Freelancers worked with
3
Projects awarded
38%
Last project
28 May 2017
United Kingdom
New Proposal
Login to your account and send a proposal now to get this project.
Log inClarification Board Ask a Question
-
Hello,
Would you accept a fixed price quotation?
Tom
405932
We collect cookies to enable the proper functioning and security of our website, and to enhance your experience. By clicking on 'Accept All Cookies', you consent to the use of these cookies. You can change your 'Cookies Settings' at any time. For more information, please read ourCookie Policy
Cookie Settings
Accept All Cookies