COC Plastic medical packaging

  • Posted:
  • Proposals: 1
  • Remote
  • #101017
  • Archived
Jack S. has already sent a proposal.
  • 1


Experience Level: Intermediate
This is for a SolidWorks 3D CAD rendering of a double walled cassette mold which will be made of plastic.

I have created detailed drawings, one of a base plate and one of a lid plate with the all dimensions you require. (see attached jpgs)

1. The plastic plate thickness is 3 mm for base and lid.

2. The surround raised edge is 0.2 mm on each plate.

3. When the two sides come together, the 8 cm x 12 cm space between the plates will be 0.4mm in thickness.

4. The Internal Diameter (ID) of the injection port is 4.7625 mm. Each plate will have half the port.

5. The 8cm x 12cm x 0.4 mm space should be in communication with the injection port, so the dimensions of the hollow mold created are 8cm x 12cm x 0.4 mm.

6. The grid pattern is on the base plate is 0.1mm in depth.

The two plates click together with a grove on one plate which fits the tongue or protrusion on the other.

Please provide an estimate of the time required to do the job and the cost.


New Proposal

Create an account now and send a proposal now to get this project.

Sign up

Clarification Board Ask a Question

    There are no clarification messages.