Water Projects

Urgent Requirement–Drainage / Wastewater Assessment (N.IRELAND)

We are seeking assistance from a suitably qualified Civil Engineer, Drainage Engineer or Water Engineer to prepare a short technical note in support of a live planning application in Northern Ireland. Background The planning application relates to an existing public house and adjoining retail unit. As part of the proposal, an existing hot food deli operation is being removed and the retail floorspace is being incorporated into the public house. A key issue has arisen regarding wastewater generation and the potential impact on the NI Water network. We require an independent professional assessment of whether the removal of the existing deli operation is likely to offset, or potentially exceed, any increase in wastewater generation associated with the proposed use. Scope The successful consultant would be required to: • Review photographs and information relating to the existing deli operation. • Assess the likely wastewater generation associated with the existing deli use. • Consider the proposed arrangement and likely wastewater generation following removal of the deli. • Provide an opinion on whether overall wastewater generation is likely to remain similar, reduce, or increase. • Prepare a short technical note on company headed paper suitable for submission to NI Water and the Planning Authority. Requirements • Relevant qualification in Civil Engineering, Drainage Engineering, Water Engineering or similar. • Experience of drainage design, wastewater assessments or NI Water applications. • Ability to provide a professional opinion on company headed paper. • Quick turnaround essential. Timescales This is an urgent commission and we would ideally require a draft note within 24–48 hours. Please contact Ryan Milligan at Planning Experts if interested

opportunity

Garden landscape design and plans

I need my rear garden designing so its sleek, modern and low maintenance. A place for entertaining and outdoor drinks. Raised beds with trees , plants and shrubs. Outdoor lighting and water feature. To incorporate the proposed garden room as per the plans which I will supply.

Voice-over for Water Scarcity Workshop Video

We need a voice-over for a video that we are aiming to send to teachers of the schools we want to visit and do our workshop. This video is about what the workshop includes and why it is important for them to be using water carefully.

Flutter App Dev to complete my existing Android / iOS project

I hired a previous dev who purchased this premade Flutter app and has added so customizations https://codecanyon.net/item/run-tracker-step-counter-and-water-reminder-flutter-android-ios-app/34240320 I am looking to remove / add some more features and complete the project. Looking to start / complete ASAP

Drainage Layout Drawing Amendments - CAD

I am seeking a quotation for the amendment and reissue of an existing drainage layout drawing relating to a planning condition discharge submission for a mixed-use conversion project at: 95 High Street Chelmsford CM1 1DX Background A drainage layout drawing has already been prepared and submitted to the drainage officer (Essex County Council / LLFA). Following review, the drainage officer has requested a small number of amendments before the drainage strategy can be accepted. The drainage principle itself has already been agreed and no redesign is required. Scope Required I require the existing drainage layout drawing to be amended and reissued in PDF format incorporating the following: • Clearly show separate foul and surface water systems throughout • Clearly show foul drainage discharging to the public foul sewer (FW) • Clearly show surface water drainage discharging to the public surface water sewer (SW) • Remove any implication that foul and surface water connect into a combined lateral drain before reaching the public network • Add annotation confirming surface water discharge will be restricted to 2.0 litres per second • Update notes and key accordingly • Retain existing architectural floor plans and existing drainage routes where possible Information Available I can provide: • Existing drainage layout drawing (PDF) • Approved floor plans • Drainage officer comments • Mark-up instructions • Site photographs and location information if required Deliverables • Revised drainage layout drawing (PDF) • Submission-ready version suitable for issue to Essex County Council drainage officer

STL file of a hand basin for 3D print

I’m looking to make this basic sketchup model of a hand basin into an stl file ready for 3D printing. The issue that I have is that the model isn’t solid, I would like to add a 5mm radius to the edges and a slight dip in the centre of the water run. The dimensions are 340mm diameter with a 32mm hole and basin bottom depth 35mm for a for Click Clack Basin Waste like this: https://www.victorianplumbing.co.uk/moon-slotted-click-clack-basin-waste-chrome-mbw01 Attached is a screenshot of the stl file, dwg file, basin waste image and CGI image which I can provide.

Telemarketing B2B to set up free flavored water tasting events

This ongoing project is to make cold calls and schedule free flavor water tasting sampling events. We will take it from there. Part Time, Full Time, Hourly, or By Project Work. This would be to cold call tele market to schedule Free Flavored Water Tastings Sample events in any and all businesses, meet up groups, charities, memberships, etc. so that their walk in traffic can receive a free sample from our company. Our website is: www.giversuniversity.com our free samples would be a free sample tasting of our flavored nutritional water drink call GIVERwater. We position the Free Flavored Water Tasting Samples as a Free Gift that is given from the event venue to their customers. There is no cost to Venue or the owner of the business, and our reps will show up at the scheduled time to pass out the flavored water tasting samples. Our reps will provide the samples free of charge to the event venue and free of charge to the customers who receive the free flavored water tasting samples.

House layout changes in Autocad

Hi I have a house being built but I had to change the layout and a few other items. I need a person who knows autocad and can adjust the dwg to the new layout. I can send photos of all the changes and I have the CAD file. The following is the main work: a new window was installed in the kitchen adjacent to the boundary. b.Removal of the hot water cylinder from the store on the first floor. c. Show the enlarged bathroom on the first floor, omitted storage, and enlarged landing. d. Show the installed attic hatch in bedroom 2.

3D Printable Wall-Mounted Vertical Ant Farm Model Design Needed

I am looking for someone to design a vertical wall-mounted ant farm model that can be 3D printed. The model needs to be practical, secure, and designed properly for printing. It should be suitable for ants, with natural-looking tunnels and chambers visible from the front. The design will need to be supplied as printable STL/STEP files. ⸻ Main Design Requirements The ant farm should be designed as a vertical wall-mounted unit. It needs to: * Be easy and secure to wall mount. * Have a strong rear body/frame. * Include mounting holes or keyhole-style wall fixings. * Be stable once fitted to a wall. * Be suitable for 3D printing without unnecessary supports where possible. ⸻ Front Perspex Panel The front needs a recessed area to hold an A4 sheet of 3 mm Perspex. The Perspex size will be: 297 mm wide x 210 mm tall x 3 mm thick Please note: the Perspex must sit neatly into the front recess. The model also needs screw holes around the front so the Perspex can be fixed securely using M3 screws. I would like the screw holes positioned neatly around the Perspex, with enough support around them so the print does not crack when tightened. ⸻ Magnet Slots The model also needs small recesses for magnets to be glued into place. Magnet size: 4 mm wide x 2 mm deep These should be placed in sensible positions to help secure interchangeable side parts, covers, or connection pieces. The magnet holes should be slightly oversized to allow for glue and tolerance. ⸻ Natural Tunnel System The main visible section needs to include a natural-looking tunnel system, similar to the example image supplied. The tunnels should not look too geometric or artificial. I want: * Natural burrow-style tunnels. * Wider cave areas/chambers. * Larger voids for breeding, resting, or storing food. * Multiple routes up, down, left, and right. * Interconnecting tunnels. * Tunnels and chambers fully visible from the front through the Perspex. * Enough depth for ants to move comfortably. The tunnels should feel organic, but still printable and easy to clean where possible. ⸻ Side Connection System The design needs interchangeable side sections on both sides. These side sections should allow the user to either: 1. Connect multiple ant farm units together, or 2. Block the side opening if only using one unit. So I need: * Left and right side connection points. * Removable connector parts. * Removable blanking/blocking parts. * Secure fitting using magnets, screws, or a simple mechanical slot system. * The ability to expand the ant farm in the future by adding more printed units. ⸻ Foraging Area The design needs a foraging area built into it. This should be separate from the main tunnel section but connected so ants can access it. The foraging area needs to be large enough for: * Ants to explore. * Food to be placed inside. * Easy access for maintenance. * Good visibility. ⸻ Water / Sweet Water Area The model also needs a dedicated area large enough to place water or sweet water. This could be designed as: * A small removable tray area. * A recess for a small test tube/water tube. * A space to place a small feeding dish. I am open to suggestions on the best option, as long as it is practical, safe for ants, and easy to refill. ⸻ Printing Requirements The model must be designed for FDM 3D printing. Please design with the following in mind: * Printable on a standard large-format 3D printer. * Strong walls. * Minimal supports where possible. * Sensible tolerances for Perspex, magnets, screws, and connectors. * Parts should be split if needed to make printing easier. * The design should not rely on very fragile details. * Wall-mounted strength is important. Ideally, I would like files supplied in: * STL * STEP, if possible * Separate files for the main body, side connectors, blanking plates, and any removable parts ⸻ Style Reference I have attached an image showing the style I like. The tunnel system should be visible from the front and have a natural cave/burrow look, rather than straight lines or basic grids. I want the final design to look clean, modern, and functional, while still feeling like a natural ant habitat. ⸻ Final Deliverables Please provide: * Full 3D printable model files. * Separate printable parts where needed. * A version with the A4 Perspex recess. * Side connector pieces. * Side blanking/blocking pieces. * Magnet recesses. * M3 screw holes for the Perspex. * Wall mounting points. * Any notes on print orientation and assembly. ⸻ Important Notes The design must be practical, not just visually nice. This will be printed and used, so tolerances, strength, Perspex fitting, wall mounting, and ant access all matter. Please include examples of previous 3D printable product designs or functional models you have created. Designs for enclosures, terrariums, aquariums, modular systems, or mechanical parts would be helpful.

Voice-Over for a water scarcity related video.

We are creating material for presenting at schools to teach children how to save water. We already have a ready video where the text is read out loud by AI. We want to see if we can use a real voice instead. The video is about the water scarcity issue in Africa. The text would be attached for you to see if you like to read it.

Glow masque

I'm launching a skincare face mask called "Glow Masque" and I need a 15 to 20 second 3D AI animation video ad. Style: natural luxe, clean, minimal, premium. Think soft white background, plants, water drops, golden light. Not flashy, not cartoon. Storyboard idea: 1. 3D jar of Glow Masque rotating slowly 2. Natural ingredients floating around it (aloe vera, green tea, clay) 3. Smooth texture of the mask spreading on skin, close up 4. Skin transition from dull to glowing 5. End screen with product + tagline Text overlay to include: "Bottled nature, tailored for your glow." End CTA: "Shop Now" Specs: 9:16 for Reels/TikTok and 1:1 for Instagram feed, 4K MP4, no voiceover, elegant background music (royalty-free). Deliver source file if possible. Reference style: Apple skincare ads, clean 3D product renders. Deadline: 3-4 days.

urgent

Social media content for campaign

Need someone to create a clean, modern set of social ads for a water filtration campaign focused on driving sign-ups. Full brief provided upon successful application - product video, links, direction will be supplied - just need designing Deliverables • Portrait social ad • Square (1:1) social ad • Landscape social ad • Website banner / campaign header version Must be available to complete over the weekend for Monday launch.

opportunity

Architectural CAD Drawings (DWG + PDF) Based on Sketches

Architectural CAD Drawings (DWG + PDF) Based on Existing Sketches https://we.tl/t-WjH3xvQogaP6ry4d I am looking for an architectural technician or architect to convert my attached sketches into professional DWG and PDF drawings. Important The attached sketches are the design basis and must be followed as closely as possible. I am not looking for a redesign. Only changes required for Dutch regulations (Bbl 2026), fire safety or technical feasibility should be suggested. Required Drawings Site plan Ground floor plan First floor plan Attic floor plan Front elevation Rear elevation Left side elevation Right side elevation 1 longitudinal section 1 cross section Fire compartment drawing Escape route drawing Utility drawing (water, drainage and electricity) Requirements Please incorporate as much as possible: Dutch Bbl 2026 requirements Separate fire compartment per apartment Rear escape route Door openings preferably 110 cm Daylight where possible Ventilation considerations Parking layout New traffic circulation on site Water, drainage and electricity indicated schematically Available Information Exact measurements are not available. Please work from: Attached sketches Known dimensions Existing building proportions Dutch building standards Clearly indicate any assumptions made. Deliverables Editable DWG files Scaled PDF drawings Separate CAD layers for walls, doors, windows, utilities, fire compartments, escape routes and parking The final drawings should be suitable as a professional preliminary design for discussions with the municipality, architect and future permit application.

Fun, exciting and loud PERFORMANCE water for dogs

Hello, we need an outside the box thinking designer who will be able to create a label for our brand new performance hydration water for dogs. We want something to align with our current brand line of supplements, but also have a performance touch to it. We have added a vision board plus some designs we have made. We already have a logo for the overall company called Porkie Pie but need label design for our WOOF water. The woof is to be the main wording on the label with the writing small and below for water.

Editing and sequencing needed for short documentary style video

Editor will be chosen within 24 hours. We are a non-profit doing fundraising for a water restoration project in Madagascar. We need editing and sequencing for a 3 minute fundraising video. Coloring, music, text, voice overlay, and motion graphics. We are looking for quality documentary styling. Music, timestamped video, photos and voiceover are ready to edit in Google Drive. Tell us how long you have used any of the following: Di Vinci Resolve, Adobe Premium Pro or CapCut. What is your turnaround time? What is included in your editing? How many revision rounds are included per edit? We prefer to upload footage in Google Drive if possible. We prefer using WhatsApp text chat as we are in Madagascar. Samples of your work are required. Will promptly reply. Thanks

Schematics

We require a schematic to show proposed new runs for new pipework for a property . We would also be interested if you could do schematics for water risk assessments ? We have about 55 risk assessments to do and would be great to have a chat about them