Vehicle Wrap (Ford Fiesta ST 2018 Mk8) – to 1:1 Scale SVG

I need an experienced vehicle graphics designer to convert my custom livery design into a production-ready, 1:1 real-world scale SVG file package optimized for commercial vinyl printing and plotting.

Document Roles (Attached) Lucy1 - Master Blueprint: Follow strictly for all measurements, stripe widths, and specs. This overrides everything for sizing.
Lucy2 - Visual Guide: Use only as a visual reference for how the layout sits on the car body panels and how graphics terminate.

Vehicle Dimensions (For 1:1 Scale Calibration) - Total Length: 4,068 mm - Wheelbase: 2,493 mm - Total Height: 1,469 mm - Body Width (No Mirrors): 1,735 mm - Body Width (With Mirrors): 1,941 mm - Graphic Vector Specifications Per Lucy1 Master Specs
Main Center Stripe PackageSatin Graphite Center Stripe: Exactly 19 inches (482 mm) wide.
Pinstripes & Gaps: 3 mm inner gap, then a 6 mm Satin Silver pinstripe, followed by a 2 mm Race Red outer pinstripe.
Placement: Centered on bonnet, starting 90 mm back from the front nose.
Termination: Runs over roof/spoiler and stops exactly at the rear spoiler lip (no wrap down onto glass or trunk).
Side Flanks (Left & Right)Upper Flow Stripe: Max 20 mm width at rear, tapering to 5 mm at front wheel arch.
Lower Rocker Pinstripe: Continuous 6 mm wide Race Red line.
Ghost Chequered Flag: Positioned on rear quarter panel.
Max height at rear edge must be exactly 260 mm.
Rear Hatch & Accents"FORD PERFORMANCE" Text: Exactly 120 mm total width.
Trunk Handle Pinstripe: 10 mm wide, centered on handle.
Bumper & Diffuser Lines: Fixed 6 mm width matching OEM bumper contours.

Production Deliverables ChecklistFormat:
Layered, uncompressed SVG with all text converted to outlines.
Layers: Separated by zone (BONNET, ROOF, REAR_SPOILER, LEFT_SIDE, RIGHT_SIDE, REAR_HATCH).
Plotter Ready: Clean Bezier curves, continuous vector lines, and zero overlapping nodes.
Bleed: Include a 50 mm (2-inch) wrap allowance on the ends of all stripes for wrapping panel edges.