Fusion 360 - 3D Printed Raspberry Pi / Microservo Robot Design

  • Posted:
  • Proposals: 11
  • Remote
  • #2580231
  • OPPORTUNITY
  • Awarded
Dmitry M.
Dani E.Ulas D.Richa A.Md Mahbubul A. + 6 others have already sent a proposal.
  • 9

Description

Experience Level: Expert
Estimated project duration: 1 day or less
I am working on a project with a Raspberry Pi and I need a 3D printed robot chassis designing that I can 3D print on my 3D printer. I have a license for Fusion 360 but as I don't use it very often I am looking to outsource the design of the robot chassis to get something done quickly.

Essentially my current idea for the robot consists of two microservos with 60mm diameter wheels, a Raspberry Pi 3 or 4, a small servo control board (approx 60mm x 20mm) and some space/capability for a battery. I expected to mount the servos by pushing them into a servo-shaped cavity in the chassis (perhaps secured with some hot glue or double-sided tape if it's a loose fit).

I have attached a picture of an idea for the robot made out of cardboard. I expect the final diameter of the robot to be around 130mm. The design needs to be 3D printable - preferably as a single part.

I am looking to get moving on this ASAP so please include a lead time and any ideas you have for the design.

New Proposal

Create an account now and send a proposal now to get this project.

Sign up

Clarification Board Ask a Question

    There are no clarification messages.